include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  14
  15 /*
  16  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  17  * for DDR ECC byte filling in the SPL before loading the main
  18  * U-Boot into it.
  19  */
  20
  21 /*
  22  * SATA/SCSI/AHCI configuration
  23  */
  24 #define CONFIG_SCSI_AHCI_PLAT
  25 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  26 #define CONFIG_SYS_SCSI_MAX_LUN         1
  27 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  28                                          CONFIG_SYS_SCSI_MAX_LUN)
  29
  30 /* Environment in SPI NOR flash */
  31
  32 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  33
  34 /* PCIe support */
  35 #ifndef CONFIG_SPL_BUILD
  36 #define CONFIG_PCI_SCAN_SHOW
  37 #endif
  38
  39 /*
  40  * Software (bit-bang) MII driver configuration
  41  */
  42 #define CONFIG_BITBANGMII_MULTI
  43
  44 /* SPL */
  45 /*
  46  * Select the boot device here
  47  *
  48  * Currently supported are:
  49  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  50  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  51  */
  52 #define SPL_BOOT_SPI_NOR_FLASH          1
  53 #define SPL_BOOT_SDIO_MMC_CARD          2
  54 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  55
  56 /* Defines for SPL */
  57 #define CONFIG_SPL_SIZE                 (160 << 10)
  58
  59 #if defined(CONFIG_SECURED_MODE_IMAGE)
  60 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  61 #else
  62 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
  63 #endif
  64
  65 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
  66 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  67
  68 #ifdef CONFIG_SPL_BUILD
  69 #define CONFIG_SYS_MALLOC_SIMPLE
  70 #endif
  71
  72 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
  73 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  74
  75 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  76 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  77 #define CONFIG_SPL_I2C
  78
  79 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
  80 /* SPL related MMC defines */
  81 #define CONFIG_SPL_MMC
  82 #ifdef CONFIG_SPL_BUILD
  83 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
  84 #endif
  85 #endif
  86
  87 /*
  88  * Environment Configuration
  89  */
  90
  91 #define CONFIG_HOSTNAME         "ccdc"
  92 #define CONFIG_ROOTPATH         "/opt/nfsroot"
  93 #define CONFIG_BOOTFILE         "ccdc.img"
  94
  95 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
  96         "netdev=eth1\0"                                         \
  97         "consoledev=ttyS1\0"                                                    \
  98         "u-boot=u-boot.bin\0"                                                   \
  99         "bootfile_addr=1000000\0"                                               \
 100         "keyprogram_addr=3000000\0"                                             \
 101         "keyprogram_file=keyprogram.img\0"                                              \
 102         "fdtfile=controlcenterdc.dtb\0"                                         \
 103         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 104         "mmcdev=0:2\0"                                                          \
 105         "update=sf probe 1:0;"                                                  \
 106                 " sf erase 0 +${filesize};"                                     \
 107                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 108         "upd=run load update\0"                                                 \
 109         "fdt_high=0x10000000\0"                                                 \
 110         "initrd_high=0x10000000\0"                                              \
 111         "loadkeyprogram=tpm flush_keys;"                                        \
 112                 " mmc rescan;"                                                  \
 113                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 114                 " source ${keyprogram_addr}:script@1\0"                         \
 115         "gpio1=gpio@22_25\0"                                                    \
 116         "gpio2=A29\0"                                                           \
 117         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 118                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 119         "bootfail=for i in ${blinkseq}; do"                                     \
 120                 " if test $i -eq 0; then"                                       \
 121                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 122                 " elif test $i -eq 1; then"                                     \
 123                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 124                 " elif test $i -eq 2; then"                                     \
 125                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 126                 " else;"                                                        \
 127                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 128                 " fi; sleep 0.12; done\0"
 129
 130 #define NFSBOOTCOMMAND                                                          \
 131         "setenv bootargs root=/dev/nfs rw "                                             \
 132         "nfsroot=${serverip}:${rootpath} "                                              \
 133         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 134         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 135         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 136         "bootm ${bootfile_addr}"
 137
 138 #define MMCBOOTCOMMAND                                  \
 139         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 140         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 141         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 142         "bootm ${bootfile_addr}"
 143
 144 #define CONFIG_BOOTCOMMAND                      \
 145         "if env exists keyprogram; then;"       \
 146         " setenv keyprogram; run nfsboot;"      \
 147         " fi;"                                  \
 148         " run dobootfail"
 149
 150 /*
 151  * mv-common.h should be defined after CMD configs since it used them
 152  * to enable certain macros
 153  */
 154 #include "mv-common.h"
 155
 156 #endif /* _CONFIG_CONTROLCENTERDC_H */