1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
7 #ifndef _CONFIG_CONTROLCENTERDC_H
8 #define _CONFIG_CONTROLCENTERDC_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
15 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
18 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
19 * for DDR ECC byte filling in the SPL before loading the main
23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
25 #define CONFIG_LOADADDR 1000000
28 * SDIO/MMC Card Configuration
30 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
33 * SATA/SCSI/AHCI configuration
35 #define CONFIG_SCSI_AHCI_PLAT
36 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
37 #define CONFIG_SYS_SCSI_MAX_LUN 1
38 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
39 CONFIG_SYS_SCSI_MAX_LUN)
41 /* USB/EHCI configuration */
42 #define CONFIG_EHCI_IS_TDI
44 /* Environment in SPI NOR flash */
46 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
49 #ifndef CONFIG_SPL_BUILD
50 #define CONFIG_PCI_SCAN_SHOW
54 * Software (bit-bang) MII driver configuration
56 #define CONFIG_BITBANGMII_MULTI
60 * Select the boot device here
62 * Currently supported are:
63 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
64 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
66 #define SPL_BOOT_SPI_NOR_FLASH 1
67 #define SPL_BOOT_SDIO_MMC_CARD 2
68 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
71 #define CONFIG_SPL_SIZE (160 << 10)
73 #if defined(CONFIG_SECURED_MODE_IMAGE)
74 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614)
76 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30)
79 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
80 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
82 #ifdef CONFIG_SPL_BUILD
83 #define CONFIG_SYS_MALLOC_SIMPLE
86 #define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10))
87 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
89 #define CONFIG_SPL_LIBCOMMON_SUPPORT
90 #define CONFIG_SPL_LIBGENERIC_SUPPORT
91 #define CONFIG_SPL_I2C_SUPPORT
93 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
94 /* SPL related SPI defines */
95 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
98 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
99 /* SPL related MMC defines */
100 #define CONFIG_SPL_MMC_SUPPORT
101 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
102 #define CONFIG_SYS_MMC_U_BOOT_OFFS (168 << 10)
103 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
104 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
105 #ifdef CONFIG_SPL_BUILD
106 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
111 * Environment Configuration
114 #define CONFIG_HOSTNAME "ccdc"
115 #define CONFIG_ROOTPATH "/opt/nfsroot"
116 #define CONFIG_BOOTFILE "ccdc.img"
118 #define CONFIG_EXTRA_ENV_SETTINGS \
120 "consoledev=ttyS1\0" \
121 "u-boot=u-boot.bin\0" \
122 "bootfile_addr=1000000\0" \
123 "keyprogram_addr=3000000\0" \
124 "keyprogram_file=keyprogram.img\0" \
125 "fdtfile=controlcenterdc.dtb\0" \
126 "load=tftpboot ${loadaddr} ${u-boot}\0" \
128 "update=sf probe 1:0;" \
129 " sf erase 0 +${filesize};" \
130 " sf write ${fileaddr} 0 ${filesize}\0" \
131 "upd=run load update\0" \
132 "fdt_high=0x10000000\0" \
133 "initrd_high=0x10000000\0" \
134 "loadkeyprogram=tpm flush_keys;" \
136 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
137 " source ${keyprogram_addr}:script@1\0" \
138 "gpio1=gpio@22_25\0" \
140 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \
141 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \
142 "bootfail=for i in ${blinkseq}; do" \
143 " if test $i -eq 0; then" \
144 " gpio clear ${gpio1}; gpio set ${gpio2};" \
145 " elif test $i -eq 1; then" \
146 " gpio clear ${gpio1}; gpio clear ${gpio2};" \
147 " elif test $i -eq 2; then" \
148 " gpio set ${gpio1}; gpio set ${gpio2};" \
150 " gpio clear ${gpio1}; gpio set ${gpio2};" \
151 " fi; sleep 0.12; done\0"
153 #define CONFIG_NFSBOOTCOMMAND \
154 "setenv bootargs root=/dev/nfs rw " \
155 "nfsroot=${serverip}:${rootpath} " \
156 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \
157 "console=${consoledev},${baudrate} ${othbootargs}; " \
158 "tftpboot ${bootfile_addr} ${bootfile}; " \
159 "bootm ${bootfile_addr}"
161 #define CONFIG_MMCBOOTCOMMAND \
162 "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \
163 "console=${consoledev},${baudrate} ${othbootargs}; " \
164 "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \
165 "bootm ${bootfile_addr}"
167 #define CONFIG_BOOTCOMMAND \
168 "if env exists keyprogram; then;" \
169 " setenv keyprogram; run nfsboot;" \
174 * mv-common.h should be defined after CMD configs since it used them
175 * to enable certain macros
177 #include "mv-common.h"
179 #endif /* _CONFIG_CONTROLCENTERDC_H */