1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
7 #ifndef _CONFIG_CONTROLCENTERDC_H
8 #define _CONFIG_CONTROLCENTERDC_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
15 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
18 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
19 * for DDR ECC byte filling in the SPL before loading the main
23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
25 #define CONFIG_LOADADDR 1000000
28 * SATA/SCSI/AHCI configuration
30 #define CONFIG_SCSI_AHCI_PLAT
31 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
32 #define CONFIG_SYS_SCSI_MAX_LUN 1
33 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
34 CONFIG_SYS_SCSI_MAX_LUN)
36 /* USB/EHCI configuration */
37 #define CONFIG_EHCI_IS_TDI
39 /* Environment in SPI NOR flash */
41 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
44 #ifndef CONFIG_SPL_BUILD
45 #define CONFIG_PCI_SCAN_SHOW
49 * Software (bit-bang) MII driver configuration
51 #define CONFIG_BITBANGMII_MULTI
55 * Select the boot device here
57 * Currently supported are:
58 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
59 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
61 #define SPL_BOOT_SPI_NOR_FLASH 1
62 #define SPL_BOOT_SDIO_MMC_CARD 2
63 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
66 #define CONFIG_SPL_SIZE (160 << 10)
68 #if defined(CONFIG_SECURED_MODE_IMAGE)
69 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614)
71 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30)
74 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
75 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
77 #ifdef CONFIG_SPL_BUILD
78 #define CONFIG_SYS_MALLOC_SIMPLE
81 #define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10))
82 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
84 #define CONFIG_SPL_LIBCOMMON_SUPPORT
85 #define CONFIG_SPL_LIBGENERIC_SUPPORT
86 #define CONFIG_SPL_I2C
88 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
89 /* SPL related SPI defines */
90 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
93 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
94 /* SPL related MMC defines */
95 #define CONFIG_SPL_MMC_SUPPORT
96 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
97 #define CONFIG_SYS_MMC_U_BOOT_OFFS (168 << 10)
98 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
99 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
100 #ifdef CONFIG_SPL_BUILD
101 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
106 * Environment Configuration
109 #define CONFIG_HOSTNAME "ccdc"
110 #define CONFIG_ROOTPATH "/opt/nfsroot"
111 #define CONFIG_BOOTFILE "ccdc.img"
113 #define CONFIG_EXTRA_ENV_SETTINGS \
115 "consoledev=ttyS1\0" \
116 "u-boot=u-boot.bin\0" \
117 "bootfile_addr=1000000\0" \
118 "keyprogram_addr=3000000\0" \
119 "keyprogram_file=keyprogram.img\0" \
120 "fdtfile=controlcenterdc.dtb\0" \
121 "load=tftpboot ${loadaddr} ${u-boot}\0" \
123 "update=sf probe 1:0;" \
124 " sf erase 0 +${filesize};" \
125 " sf write ${fileaddr} 0 ${filesize}\0" \
126 "upd=run load update\0" \
127 "fdt_high=0x10000000\0" \
128 "initrd_high=0x10000000\0" \
129 "loadkeyprogram=tpm flush_keys;" \
131 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
132 " source ${keyprogram_addr}:script@1\0" \
133 "gpio1=gpio@22_25\0" \
135 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \
136 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \
137 "bootfail=for i in ${blinkseq}; do" \
138 " if test $i -eq 0; then" \
139 " gpio clear ${gpio1}; gpio set ${gpio2};" \
140 " elif test $i -eq 1; then" \
141 " gpio clear ${gpio1}; gpio clear ${gpio2};" \
142 " elif test $i -eq 2; then" \
143 " gpio set ${gpio1}; gpio set ${gpio2};" \
145 " gpio clear ${gpio1}; gpio set ${gpio2};" \
146 " fi; sleep 0.12; done\0"
148 #define CONFIG_NFSBOOTCOMMAND \
149 "setenv bootargs root=/dev/nfs rw " \
150 "nfsroot=${serverip}:${rootpath} " \
151 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \
152 "console=${consoledev},${baudrate} ${othbootargs}; " \
153 "tftpboot ${bootfile_addr} ${bootfile}; " \
154 "bootm ${bootfile_addr}"
156 #define CONFIG_MMCBOOTCOMMAND \
157 "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \
158 "console=${consoledev},${baudrate} ${othbootargs}; " \
159 "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \
160 "bootm ${bootfile_addr}"
162 #define CONFIG_BOOTCOMMAND \
163 "if env exists keyprogram; then;" \
164 " setenv keyprogram; run nfsboot;" \
169 * mv-common.h should be defined after CMD configs since it used them
170 * to enable certain macros
172 #include "mv-common.h"
174 #endif /* _CONFIG_CONTROLCENTERDC_H */