include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  12  * for DDR ECC byte filling in the SPL before loading the main
  13  * U-Boot into it.
  14  */
  15
  16 /* Environment in SPI NOR flash */
  17
  18 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  19
  20 /* PCIe support */
  21 #define CONFIG_PCI_SCAN_SHOW
  22
  23 /*
  24  * Environment Configuration
  25  */
  26
  27 #define CONFIG_HOSTNAME         "ccdc"
  28 #define CONFIG_ROOTPATH         "/opt/nfsroot"
  29
  30 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
  31         "netdev=eth1\0"                                         \
  32         "consoledev=ttyS1\0"                                                    \
  33         "u-boot=u-boot.bin\0"                                                   \
  34         "bootfile_addr=1000000\0"                                               \
  35         "keyprogram_addr=3000000\0"                                             \
  36         "keyprogram_file=keyprogram.img\0"                                              \
  37         "fdtfile=controlcenterdc.dtb\0"                                         \
  38         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
  39         "mmcdev=0:2\0"                                                          \
  40         "update=sf probe 1:0;"                                                  \
  41                 " sf erase 0 +${filesize};"                                     \
  42                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
  43         "upd=run load update\0"                                                 \
  44         "fdt_high=0x10000000\0"                                                 \
  45         "initrd_high=0x10000000\0"                                              \
  46         "loadkeyprogram=tpm flush_keys;"                                        \
  47                 " mmc rescan;"                                                  \
  48                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
  49                 " source ${keyprogram_addr}:script@1\0"                         \
  50         "gpio1=gpio@22_25\0"                                                    \
  51         "gpio2=A29\0"                                                           \
  52         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
  53                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
  54         "bootfail=for i in ${blinkseq}; do"                                     \
  55                 " if test $i -eq 0; then"                                       \
  56                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
  57                 " elif test $i -eq 1; then"                                     \
  58                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
  59                 " elif test $i -eq 2; then"                                     \
  60                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
  61                 " else;"                                                        \
  62                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
  63                 " fi; sleep 0.12; done\0"
  64
  65 /*
  66  * mv-common.h should be defined after CMD configs since it used them
  67  * to enable certain macros
  68  */
  69 #include "mv-common.h"
  70
  71 #endif /* _CONFIG_CONTROLCENTERDC_H */