1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
7 #ifndef _CONFIG_CONTROLCENTERDC_H
8 #define _CONFIG_CONTROLCENTERDC_H
11 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
12 * for DDR ECC byte filling in the SPL before loading the main
16 /* Environment in SPI NOR flash */
18 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
21 #ifndef CONFIG_SPL_BUILD
22 #define CONFIG_PCI_SCAN_SHOW
27 * Select the boot device here
29 * Currently supported are:
30 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
31 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
33 #define SPL_BOOT_SPI_NOR_FLASH 1
34 #define SPL_BOOT_SDIO_MMC_CARD 2
35 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
38 #define CONFIG_SPL_SIZE (160 << 10)
40 #if defined(CONFIG_SECURED_MODE_IMAGE)
41 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614)
43 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30)
46 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
47 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
49 #ifdef CONFIG_SPL_BUILD
50 #define CONFIG_SYS_MALLOC_SIMPLE
53 #define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10))
54 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
56 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
57 /* SPL related MMC defines */
58 #ifdef CONFIG_SPL_BUILD
59 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
64 * Environment Configuration
67 #define CONFIG_HOSTNAME "ccdc"
68 #define CONFIG_ROOTPATH "/opt/nfsroot"
70 #define CONFIG_EXTRA_ENV_SETTINGS \
72 "consoledev=ttyS1\0" \
73 "u-boot=u-boot.bin\0" \
74 "bootfile_addr=1000000\0" \
75 "keyprogram_addr=3000000\0" \
76 "keyprogram_file=keyprogram.img\0" \
77 "fdtfile=controlcenterdc.dtb\0" \
78 "load=tftpboot ${loadaddr} ${u-boot}\0" \
80 "update=sf probe 1:0;" \
81 " sf erase 0 +${filesize};" \
82 " sf write ${fileaddr} 0 ${filesize}\0" \
83 "upd=run load update\0" \
84 "fdt_high=0x10000000\0" \
85 "initrd_high=0x10000000\0" \
86 "loadkeyprogram=tpm flush_keys;" \
88 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
89 " source ${keyprogram_addr}:script@1\0" \
90 "gpio1=gpio@22_25\0" \
92 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \
93 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \
94 "bootfail=for i in ${blinkseq}; do" \
95 " if test $i -eq 0; then" \
96 " gpio clear ${gpio1}; gpio set ${gpio2};" \
97 " elif test $i -eq 1; then" \
98 " gpio clear ${gpio1}; gpio clear ${gpio2};" \
99 " elif test $i -eq 2; then" \
100 " gpio set ${gpio1}; gpio set ${gpio2};" \
102 " gpio clear ${gpio1}; gpio set ${gpio2};" \
103 " fi; sleep 0.12; done\0"
106 * mv-common.h should be defined after CMD configs since it used them
107 * to enable certain macros
109 #include "mv-common.h"
111 #endif /* _CONFIG_CONTROLCENTERDC_H */