include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  16 #define CONFIG_BOARD_LATE_INIT
  17
  18 /*
  19  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  20  * for DDR ECC byte filling in the SPL before loading the main
  21  * U-Boot into it.
  22  */
  23
  24 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  25
  26 #define CONFIG_LOADADDR                 1000000
  27
  28 /*
  29  * Commands configuration
  30  */
  31 #define CONFIG_CMD_I2C
  32 #define CONFIG_CMD_SPI
  33
  34 /* SPI NOR flash default params, used by sf commands */
  35 #define CONFIG_SF_DEFAULT_BUS           1
  36 #define CONFIG_SF_DEFAULT_SPEED         1000000
  37 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  38
  39 /*
  40  * SDIO/MMC Card Configuration
  41  */
  42 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  43
  44 /*
  45  * SATA/SCSI/AHCI configuration
  46  */
  47 #define CONFIG_SCSI_AHCI_PLAT
  48 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  49 #define CONFIG_SYS_SCSI_MAX_LUN         1
  50 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  51                                          CONFIG_SYS_SCSI_MAX_LUN)
  52
  53 /* USB/EHCI configuration */
  54 #define CONFIG_EHCI_IS_TDI
  55
  56 /* Environment in SPI NOR flash */
  57 #define CONFIG_ENV_SPI_BUS              1
  58 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  59 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  60 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  61
  62 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  63
  64 /* PCIe support */
  65 #ifndef CONFIG_SPL_BUILD
  66 #define CONFIG_PCI
  67 #define CONFIG_PCI_MVEBU
  68 #define CONFIG_PCI_PNP
  69 #define CONFIG_PCI_SCAN_SHOW
  70 #endif
  71
  72 /*
  73  * Software (bit-bang) MII driver configuration
  74  */
  75 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
  76 #define CONFIG_BITBANGMII_MULTI
  77
  78 /* SPL */
  79 /*
  80  * Select the boot device here
  81  *
  82  * Currently supported are:
  83  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  84  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  85  */
  86 #define SPL_BOOT_SPI_NOR_FLASH          1
  87 #define SPL_BOOT_SDIO_MMC_CARD          2
  88 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  89
  90 /* Defines for SPL */
  91 #define CONFIG_SPL_SIZE                 (160 << 10)
  92
  93 #if defined(CONFIG_SECURED_MODE_IMAGE)
  94 #define CONFIG_SPL_TEXT_BASE            0x40002614
  95 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  96 #else
  97 #define CONFIG_SPL_TEXT_BASE            0x40000030
  98 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
  99 #endif
 100
 101 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 102 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 103
 104 #ifdef CONFIG_SPL_BUILD
 105 #define CONFIG_SYS_MALLOC_SIMPLE
 106 #endif
 107
 108 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
 109 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 110
 111 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 112 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 113 #define CONFIG_SPL_I2C_SUPPORT
 114
 115 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 116 /* SPL related SPI defines */
 117 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x30000
 118 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 119 #endif
 120
 121 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 122 /* SPL related MMC defines */
 123 #define CONFIG_SPL_MMC_SUPPORT
 124 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 125 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 126 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 127 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 128 #ifdef CONFIG_SPL_BUILD
 129 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 130 #endif
 131 #endif
 132
 133 /*
 134  * Environment Configuration
 135  */
 136 #define CONFIG_ENV_OVERWRITE
 137
 138 #define CONFIG_BAUDRATE 115200
 139
 140 #define CONFIG_HOSTNAME         "ccdc"
 141 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 142 #define CONFIG_BOOTFILE         "ccdc.img"
 143
 144 #define CONFIG_PREBOOT          /* enable preboot variable */
 145
 146 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 147         "netdev=eth1\0"                                         \
 148         "consoledev=ttyS1\0"                                                    \
 149         "u-boot=u-boot.bin\0"                                                   \
 150         "bootfile_addr=1000000\0"                                               \
 151         "keyprogram_addr=3000000\0"                                             \
 152         "keyprogram_file=keyprogram.img\0"                                              \
 153         "fdtfile=controlcenterdc.dtb\0"                                         \
 154         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 155         "mmcdev=0:2\0"                                                          \
 156         "update=sf probe 1:0;"                                                  \
 157                 " sf erase 0 +${filesize};"                                     \
 158                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 159         "upd=run load update\0"                                                 \
 160         "fdt_high=0x10000000\0"                                                 \
 161         "initrd_high=0x10000000\0"                                              \
 162         "loadkeyprogram=tpm flush_keys;"                                        \
 163                 " mmc rescan;"                                                  \
 164                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 165                 " source ${keyprogram_addr}:script@1\0"                         \
 166         "gpio1=gpio@22_25\0"                                                    \
 167         "gpio2=A29\0"                                                           \
 168         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 169                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 170         "bootfail=for i in ${blinkseq}; do"                                     \
 171                 " if test $i -eq 0; then"                                       \
 172                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 173                 " elif test $i -eq 1; then"                                     \
 174                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 175                 " elif test $i -eq 2; then"                                     \
 176                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 177                 " else;"                                                        \
 178                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 179                 " fi; sleep 0.12; done\0"
 180
 181 #define CONFIG_NFSBOOTCOMMAND                                                           \
 182         "setenv bootargs root=/dev/nfs rw "                                             \
 183         "nfsroot=${serverip}:${rootpath} "                                              \
 184         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 185         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 186         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 187         "bootm ${bootfile_addr}"
 188
 189 #define CONFIG_MMCBOOTCOMMAND                                   \
 190         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 191         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 192         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 193         "bootm ${bootfile_addr}"
 194
 195 #define CONFIG_BOOTCOMMAND                      \
 196         "if env exists keyprogram; then;"       \
 197         " setenv keyprogram; run nfsboot;"      \
 198         " fi;"                                  \
 199         " run dobootfail"
 200
 201 /*
 202  * mv-common.h should be defined after CMD configs since it used them
 203  * to enable certain macros
 204  */
 205 #include "mv-common.h"
 206
 207 #endif /* _CONFIG_CONTROLCENTERDC_H */