include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  16
  17 /*
  18  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  19  * for DDR ECC byte filling in the SPL before loading the main
  20  * U-Boot into it.
  21  */
  22
  23 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  24
  25 #define CONFIG_LOADADDR                 1000000
  26
  27 /*
  28  * SATA/SCSI/AHCI configuration
  29  */
  30 #define CONFIG_SCSI_AHCI_PLAT
  31 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  32 #define CONFIG_SYS_SCSI_MAX_LUN         1
  33 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  34                                          CONFIG_SYS_SCSI_MAX_LUN)
  35
  36 /* USB/EHCI configuration */
  37 #define CONFIG_EHCI_IS_TDI
  38
  39 /* Environment in SPI NOR flash */
  40
  41 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  42
  43 /* PCIe support */
  44 #ifndef CONFIG_SPL_BUILD
  45 #define CONFIG_PCI_SCAN_SHOW
  46 #endif
  47
  48 /*
  49  * Software (bit-bang) MII driver configuration
  50  */
  51 #define CONFIG_BITBANGMII_MULTI
  52
  53 /* SPL */
  54 /*
  55  * Select the boot device here
  56  *
  57  * Currently supported are:
  58  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  59  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  60  */
  61 #define SPL_BOOT_SPI_NOR_FLASH          1
  62 #define SPL_BOOT_SDIO_MMC_CARD          2
  63 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  64
  65 /* Defines for SPL */
  66 #define CONFIG_SPL_SIZE                 (160 << 10)
  67
  68 #if defined(CONFIG_SECURED_MODE_IMAGE)
  69 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  70 #else
  71 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
  72 #endif
  73
  74 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
  75 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  76
  77 #ifdef CONFIG_SPL_BUILD
  78 #define CONFIG_SYS_MALLOC_SIMPLE
  79 #endif
  80
  81 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
  82 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  83
  84 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  85 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  86 #define CONFIG_SPL_I2C_SUPPORT
  87
  88 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
  89 /* SPL related SPI defines */
  90 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
  91 #endif
  92
  93 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
  94 /* SPL related MMC defines */
  95 #define CONFIG_SPL_MMC_SUPPORT
  96 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
  97 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
  98 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
  99 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 100 #ifdef CONFIG_SPL_BUILD
 101 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 102 #endif
 103 #endif
 104
 105 /*
 106  * Environment Configuration
 107  */
 108
 109 #define CONFIG_HOSTNAME         "ccdc"
 110 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 111 #define CONFIG_BOOTFILE         "ccdc.img"
 112
 113 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 114         "netdev=eth1\0"                                         \
 115         "consoledev=ttyS1\0"                                                    \
 116         "u-boot=u-boot.bin\0"                                                   \
 117         "bootfile_addr=1000000\0"                                               \
 118         "keyprogram_addr=3000000\0"                                             \
 119         "keyprogram_file=keyprogram.img\0"                                              \
 120         "fdtfile=controlcenterdc.dtb\0"                                         \
 121         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 122         "mmcdev=0:2\0"                                                          \
 123         "update=sf probe 1:0;"                                                  \
 124                 " sf erase 0 +${filesize};"                                     \
 125                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 126         "upd=run load update\0"                                                 \
 127         "fdt_high=0x10000000\0"                                                 \
 128         "initrd_high=0x10000000\0"                                              \
 129         "loadkeyprogram=tpm flush_keys;"                                        \
 130                 " mmc rescan;"                                                  \
 131                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 132                 " source ${keyprogram_addr}:script@1\0"                         \
 133         "gpio1=gpio@22_25\0"                                                    \
 134         "gpio2=A29\0"                                                           \
 135         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 136                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 137         "bootfail=for i in ${blinkseq}; do"                                     \
 138                 " if test $i -eq 0; then"                                       \
 139                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 140                 " elif test $i -eq 1; then"                                     \
 141                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 142                 " elif test $i -eq 2; then"                                     \
 143                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 144                 " else;"                                                        \
 145                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 146                 " fi; sleep 0.12; done\0"
 147
 148 #define CONFIG_NFSBOOTCOMMAND                                                           \
 149         "setenv bootargs root=/dev/nfs rw "                                             \
 150         "nfsroot=${serverip}:${rootpath} "                                              \
 151         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 152         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 153         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 154         "bootm ${bootfile_addr}"
 155
 156 #define CONFIG_MMCBOOTCOMMAND                                   \
 157         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 158         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 159         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 160         "bootm ${bootfile_addr}"
 161
 162 #define CONFIG_BOOTCOMMAND                      \
 163         "if env exists keyprogram; then;"       \
 164         " setenv keyprogram; run nfsboot;"      \
 165         " fi;"                                  \
 166         " run dobootfail"
 167
 168 /*
 169  * mv-common.h should be defined after CMD configs since it used them
 170  * to enable certain macros
 171  */
 172 #include "mv-common.h"
 173
 174 #endif /* _CONFIG_CONTROLCENTERDC_H */