1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
7 #ifndef _CONFIG_CONTROLCENTERDC_H
8 #define _CONFIG_CONTROLCENTERDC_H
11 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
12 * for DDR ECC byte filling in the SPL before loading the main
16 /* Environment in SPI NOR flash */
18 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
21 * Environment Configuration
24 #define CONFIG_HOSTNAME "ccdc"
25 #define CONFIG_ROOTPATH "/opt/nfsroot"
27 #define CONFIG_EXTRA_ENV_SETTINGS \
29 "consoledev=ttyS1\0" \
30 "u-boot=u-boot.bin\0" \
31 "bootfile_addr=1000000\0" \
32 "keyprogram_addr=3000000\0" \
33 "keyprogram_file=keyprogram.img\0" \
34 "fdtfile=controlcenterdc.dtb\0" \
35 "load=tftpboot ${loadaddr} ${u-boot}\0" \
37 "update=sf probe 1:0;" \
38 " sf erase 0 +${filesize};" \
39 " sf write ${fileaddr} 0 ${filesize}\0" \
40 "upd=run load update\0" \
41 "fdt_high=0x10000000\0" \
42 "initrd_high=0x10000000\0" \
43 "loadkeyprogram=tpm flush_keys;" \
45 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
46 " source ${keyprogram_addr}:script@1\0" \
47 "gpio1=gpio@22_25\0" \
49 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \
50 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \
51 "bootfail=for i in ${blinkseq}; do" \
52 " if test $i -eq 0; then" \
53 " gpio clear ${gpio1}; gpio set ${gpio2};" \
54 " elif test $i -eq 1; then" \
55 " gpio clear ${gpio1}; gpio clear ${gpio2};" \
56 " elif test $i -eq 2; then" \
57 " gpio set ${gpio1}; gpio set ${gpio2};" \
59 " gpio clear ${gpio1}; gpio set ${gpio2};" \
60 " fi; sleep 0.12; done\0"
63 * mv-common.h should be defined after CMD configs since it used them
64 * to enable certain macros
66 #include "mv-common.h"
68 #endif /* _CONFIG_CONTROLCENTERDC_H */