1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
7 #ifndef _CONFIG_CONTROLCENTERDC_H
8 #define _CONFIG_CONTROLCENTERDC_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
15 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
18 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
19 * for DDR ECC byte filling in the SPL before loading the main
23 #define CONFIG_LOADADDR 1000000
26 * SATA/SCSI/AHCI configuration
28 #define CONFIG_SCSI_AHCI_PLAT
29 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
30 #define CONFIG_SYS_SCSI_MAX_LUN 1
31 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
32 CONFIG_SYS_SCSI_MAX_LUN)
34 /* USB/EHCI configuration */
35 #define CONFIG_EHCI_IS_TDI
37 /* Environment in SPI NOR flash */
39 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
42 #ifndef CONFIG_SPL_BUILD
43 #define CONFIG_PCI_SCAN_SHOW
47 * Software (bit-bang) MII driver configuration
49 #define CONFIG_BITBANGMII_MULTI
53 * Select the boot device here
55 * Currently supported are:
56 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
57 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
59 #define SPL_BOOT_SPI_NOR_FLASH 1
60 #define SPL_BOOT_SDIO_MMC_CARD 2
61 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
64 #define CONFIG_SPL_SIZE (160 << 10)
66 #if defined(CONFIG_SECURED_MODE_IMAGE)
67 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614)
69 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30)
72 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
73 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
75 #ifdef CONFIG_SPL_BUILD
76 #define CONFIG_SYS_MALLOC_SIMPLE
79 #define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10))
80 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
82 #define CONFIG_SPL_LIBCOMMON_SUPPORT
83 #define CONFIG_SPL_LIBGENERIC_SUPPORT
84 #define CONFIG_SPL_I2C
86 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
87 /* SPL related MMC defines */
88 #define CONFIG_SPL_MMC_SUPPORT
89 #ifdef CONFIG_SPL_BUILD
90 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
95 * Environment Configuration
98 #define CONFIG_HOSTNAME "ccdc"
99 #define CONFIG_ROOTPATH "/opt/nfsroot"
100 #define CONFIG_BOOTFILE "ccdc.img"
102 #define CONFIG_EXTRA_ENV_SETTINGS \
104 "consoledev=ttyS1\0" \
105 "u-boot=u-boot.bin\0" \
106 "bootfile_addr=1000000\0" \
107 "keyprogram_addr=3000000\0" \
108 "keyprogram_file=keyprogram.img\0" \
109 "fdtfile=controlcenterdc.dtb\0" \
110 "load=tftpboot ${loadaddr} ${u-boot}\0" \
112 "update=sf probe 1:0;" \
113 " sf erase 0 +${filesize};" \
114 " sf write ${fileaddr} 0 ${filesize}\0" \
115 "upd=run load update\0" \
116 "fdt_high=0x10000000\0" \
117 "initrd_high=0x10000000\0" \
118 "loadkeyprogram=tpm flush_keys;" \
120 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
121 " source ${keyprogram_addr}:script@1\0" \
122 "gpio1=gpio@22_25\0" \
124 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \
125 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \
126 "bootfail=for i in ${blinkseq}; do" \
127 " if test $i -eq 0; then" \
128 " gpio clear ${gpio1}; gpio set ${gpio2};" \
129 " elif test $i -eq 1; then" \
130 " gpio clear ${gpio1}; gpio clear ${gpio2};" \
131 " elif test $i -eq 2; then" \
132 " gpio set ${gpio1}; gpio set ${gpio2};" \
134 " gpio clear ${gpio1}; gpio set ${gpio2};" \
135 " fi; sleep 0.12; done\0"
137 #define CONFIG_NFSBOOTCOMMAND \
138 "setenv bootargs root=/dev/nfs rw " \
139 "nfsroot=${serverip}:${rootpath} " \
140 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \
141 "console=${consoledev},${baudrate} ${othbootargs}; " \
142 "tftpboot ${bootfile_addr} ${bootfile}; " \
143 "bootm ${bootfile_addr}"
145 #define CONFIG_MMCBOOTCOMMAND \
146 "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \
147 "console=${consoledev},${baudrate} ${othbootargs}; " \
148 "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \
149 "bootm ${bootfile_addr}"
151 #define CONFIG_BOOTCOMMAND \
152 "if env exists keyprogram; then;" \
153 " setenv keyprogram; run nfsboot;" \
158 * mv-common.h should be defined after CMD configs since it used them
159 * to enable certain macros
161 #include "mv-common.h"
163 #endif /* _CONFIG_CONTROLCENTERDC_H */