include/configs/controlcenterdc.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
   4  * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
   5  */
   6
   7 #ifndef _CONFIG_CONTROLCENTERDC_H
   8 #define _CONFIG_CONTROLCENTERDC_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_CUSTOMER_BOARD_SUPPORT
  14
  15 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  16 #define CONFIG_BOARD_LATE_INIT
  17
  18 /*
  19  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  20  * for DDR ECC byte filling in the SPL before loading the main
  21  * U-Boot into it.
  22  */
  23
  24 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  25
  26 #define CONFIG_LOADADDR                 1000000
  27
  28 /*
  29  * SDIO/MMC Card Configuration
  30  */
  31 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  32
  33 /*
  34  * SATA/SCSI/AHCI configuration
  35  */
  36 #define CONFIG_SCSI_AHCI_PLAT
  37 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  38 #define CONFIG_SYS_SCSI_MAX_LUN         1
  39 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  40                                          CONFIG_SYS_SCSI_MAX_LUN)
  41
  42 /* USB/EHCI configuration */
  43 #define CONFIG_EHCI_IS_TDI
  44
  45 /* Environment in SPI NOR flash */
  46
  47 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  48
  49 /* PCIe support */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_PCI_SCAN_SHOW
  52 #endif
  53
  54 /*
  55  * Software (bit-bang) MII driver configuration
  56  */
  57 #define CONFIG_BITBANGMII               /* bit-bang MII PHY management */
  58 #define CONFIG_BITBANGMII_MULTI
  59
  60 /* SPL */
  61 /*
  62  * Select the boot device here
  63  *
  64  * Currently supported are:
  65  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
  66  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
  67  */
  68 #define SPL_BOOT_SPI_NOR_FLASH          1
  69 #define SPL_BOOT_SDIO_MMC_CARD          2
  70 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SPI_NOR_FLASH
  71
  72 /* Defines for SPL */
  73 #define CONFIG_SPL_SIZE                 (160 << 10)
  74
  75 #if defined(CONFIG_SECURED_MODE_IMAGE)
  76 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x2614)
  77 #else
  78 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x30)
  79 #endif
  80
  81 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
  82 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
  83
  84 #ifdef CONFIG_SPL_BUILD
  85 #define CONFIG_SYS_MALLOC_SIMPLE
  86 #endif
  87
  88 #define CONFIG_SPL_STACK                (0x40000000 + ((212 - 16) << 10))
  89 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
  90
  91 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  92 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  93 #define CONFIG_SPL_I2C_SUPPORT
  94
  95 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
  96 /* SPL related SPI defines */
  97 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
  98 #endif
  99
 100 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 101 /* SPL related MMC defines */
 102 #define CONFIG_SPL_MMC_SUPPORT
 103 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
 104 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (168 << 10)
 105 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 106 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512)
 107 #ifdef CONFIG_SPL_BUILD
 108 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 109 #endif
 110 #endif
 111
 112 /*
 113  * Environment Configuration
 114  */
 115 #define CONFIG_ENV_OVERWRITE
 116
 117 #define CONFIG_BAUDRATE 115200
 118
 119 #define CONFIG_HOSTNAME         "ccdc"
 120 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 121 #define CONFIG_BOOTFILE         "ccdc.img"
 122
 123 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
 124         "netdev=eth1\0"                                         \
 125         "consoledev=ttyS1\0"                                                    \
 126         "u-boot=u-boot.bin\0"                                                   \
 127         "bootfile_addr=1000000\0"                                               \
 128         "keyprogram_addr=3000000\0"                                             \
 129         "keyprogram_file=keyprogram.img\0"                                              \
 130         "fdtfile=controlcenterdc.dtb\0"                                         \
 131         "load=tftpboot ${loadaddr} ${u-boot}\0"                                 \
 132         "mmcdev=0:2\0"                                                          \
 133         "update=sf probe 1:0;"                                                  \
 134                 " sf erase 0 +${filesize};"                                     \
 135                 " sf write ${fileaddr} 0 ${filesize}\0"                         \
 136         "upd=run load update\0"                                                 \
 137         "fdt_high=0x10000000\0"                                                 \
 138         "initrd_high=0x10000000\0"                                              \
 139         "loadkeyprogram=tpm flush_keys;"                                        \
 140                 " mmc rescan;"                                                  \
 141                 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\
 142                 " source ${keyprogram_addr}:script@1\0"                         \
 143         "gpio1=gpio@22_25\0"                                                    \
 144         "gpio2=A29\0"                                                           \
 145         "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 "    \
 146                   "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0"  \
 147         "bootfail=for i in ${blinkseq}; do"                                     \
 148                 " if test $i -eq 0; then"                                       \
 149                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 150                 " elif test $i -eq 1; then"                                     \
 151                 " gpio clear ${gpio1}; gpio clear ${gpio2};"                    \
 152                 " elif test $i -eq 2; then"                                     \
 153                 " gpio set ${gpio1}; gpio set ${gpio2};"                        \
 154                 " else;"                                                        \
 155                 " gpio clear ${gpio1}; gpio set ${gpio2};"                      \
 156                 " fi; sleep 0.12; done\0"
 157
 158 #define CONFIG_NFSBOOTCOMMAND                                                           \
 159         "setenv bootargs root=/dev/nfs rw "                                             \
 160         "nfsroot=${serverip}:${rootpath} "                                              \
 161         "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off "   \
 162         "console=${consoledev},${baudrate} ${othbootargs}; "                            \
 163         "tftpboot ${bootfile_addr} ${bootfile}; "                                               \
 164         "bootm ${bootfile_addr}"
 165
 166 #define CONFIG_MMCBOOTCOMMAND                                   \
 167         "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "      \
 168         "console=${consoledev},${baudrate} ${othbootargs}; "    \
 169         "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; "       \
 170         "bootm ${bootfile_addr}"
 171
 172 #define CONFIG_BOOTCOMMAND                      \
 173         "if env exists keyprogram; then;"       \
 174         " setenv keyprogram; run nfsboot;"      \
 175         " fi;"                                  \
 176         " run dobootfail"
 177
 178 /*
 179  * mv-common.h should be defined after CMD configs since it used them
 180  * to enable certain macros
 181  */
 182 #include "mv-common.h"
 183
 184 #endif /* _CONFIG_CONTROLCENTERDC_H */