include/configs/controlcenterd.h

   1 /*
   2  * (C) Copyright 2013
   3  * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
   4  *
   5  * based on P1022DS.h
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #ifdef CONFIG_SDCARD
  30 #define CONFIG_RAMBOOT_SDCARD
  31 #endif
  32
  33 #ifdef CONFIG_SPIFLASH
  34 #define CONFIG_RAMBOOT_SPIFLASH
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_BOOKE                    /* BOOKE */
  39 #define CONFIG_E500                     /* BOOKE e500 family */
  40 #define CONFIG_P1022
  41 #define CONFIG_CONTROLCENTERD
  42 #define CONFIG_MP                       /* support multiple processors */
  43
  44 #define CONFIG_SYS_NO_FLASH
  45 #define CONFIG_ENABLE_36BIT_PHYS
  46 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  47
  48 #ifdef CONFIG_PHYS_64BIT
  49 #define CONFIG_ADDR_MAP
  50 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  51 #endif
  52
  53 #define CONFIG_L2_CACHE
  54 #define CONFIG_BTB
  55
  56 #define CONFIG_SYS_CLK_FREQ     66666600
  57 #define CONFIG_DDR_CLK_FREQ     66666600
  58
  59 #define CONFIG_SYS_RAMBOOT
  60
  61 #ifdef CONFIG_TRAILBLAZER
  62
  63 #define CONFIG_SYS_TEXT_BASE            0xf8fc0000
  64 #define CONFIG_RESET_VECTOR_ADDRESS     0xf8fffffc
  65 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)
  66
  67 /*
  68  * Config the L2 Cache
  69  */
  70 #define CONFIG_SYS_INIT_L2_ADDR         0xf8fc0000
  71 #ifdef CONFIG_PHYS_64BIT
  72 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    0xff8fc0000ull
  73 #else
  74 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  75 #endif
  76 #define CONFIG_SYS_L2_SIZE              (256 << 10)
  77 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  78
  79 #else /* CONFIG_TRAILBLAZER */
  80
  81 #define CONFIG_SYS_TEXT_BASE            0x11000000
  82 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  83 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
  84
  85 #endif /* CONFIG_TRAILBLAZER */
  86
  87 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
  88 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  89
  90 /*
  91  * Memory map
  92  *
  93  * 0x0000_0000  0x3fff_ffff     DDR                     1G Cacheable
  94  * 0xc000_0000  0xdfff_ffff     PCI Express Mem         512M non-cacheable
  95  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
  96  *
  97  * Localbus non-cacheable
  98  * 0xe000_0000  0xe00f_ffff     eLBC                    1M non-cacheable
  99  * 0xf8fc0000   0xf8ff_ffff     L2 SRAM                 256k Cacheable
 100  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 101  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 102  */
 103
 104 #define CONFIG_SYS_INIT_RAM_LOCK
 105 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 106 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* used area in RAM */
 107 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 108         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 109 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 110
 111 #ifdef CONFIG_TRAILBLAZER
 112 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */
 113 #define CONFIG_SYS_CCSRBAR              CONFIG_SYS_CCSRBAR_DEFAULT
 114 #else
 115 #define CONFIG_SYS_CCSRBAR              0xffe00000
 116 #endif
 117 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 118 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR   (CONFIG_SYS_CCSRBAR+0xf200)
 119
 120 /*
 121  * DDR Setup
 122  */
 123
 124 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 125 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 126 #define CONFIG_SYS_SDRAM_SIZE 1024
 127 #define CONFIG_VERY_BIG_RAM
 128
 129 #define CONFIG_SYS_FSL_DDR3
 130 #define CONFIG_NUM_DDR_CONTROLLERS      1
 131 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 132 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 133
 134 #define CONFIG_SYS_MEMTEST_START        0x00000000
 135 #define CONFIG_SYS_MEMTEST_END          0x3fffffff
 136
 137 #ifdef CONFIG_TRAILBLAZER
 138 #define CONFIG_SPD_EEPROM
 139 #define SPD_EEPROM_ADDRESS 0x52
 140 /*#define CONFIG_FSL_DDR_INTERACTIVE*/
 141 #endif
 142
 143 /*
 144  * Local Bus Definitions
 145  */
 146 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
 147
 148 #define CONFIG_SYS_ELBC_BASE            0xe0000000
 149 #ifdef CONFIG_PHYS_64BIT
 150 #define CONFIG_SYS_ELBC_BASE_PHYS       0xfe0000000ull
 151 #else
 152 #define CONFIG_SYS_ELBC_BASE_PHYS       CONFIG_SYS_ELBC_BASE
 153 #endif
 154
 155 #define CONFIG_UART_BR_PRELIM  \
 156         (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
 157 #define CONFIG_UART_OR_PRELIM   (OR_AM_32KB | 0xff7)
 158
 159 #define CONFIG_SYS_BR0_PRELIM   0 /* CS0 was originally intended for FPGA */
 160 #define CONFIG_SYS_OR0_PRELIM   0 /* debugging, was never used */
 161
 162 #define CONFIG_SYS_BR1_PRELIM   CONFIG_UART_BR_PRELIM
 163 #define CONFIG_SYS_OR1_PRELIM   CONFIG_UART_OR_PRELIM
 164
 165 /*
 166  * Serial Port
 167  */
 168 #define CONFIG_CONS_INDEX               2
 169 #define CONFIG_SYS_NS16550_SERIAL
 170 #define CONFIG_SYS_NS16550_REG_SIZE     1
 171 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 172
 173 #define CONFIG_SYS_BAUDRATE_TABLE       \
 174         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 175
 176 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 177 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 178
 179 /*
 180  * I2C
 181  */
 182 #define CONFIG_SYS_I2C
 183 #define CONFIG_SYS_I2C_FSL
 184 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 185 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 186 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 187 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 188 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 189 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 190
 191 #ifndef CONFIG_TRAILBLAZER
 192 #endif
 193
 194 #define CONFIG_PCA9698                  /* NXP PCA9698 */
 195
 196 #define CONFIG_CMD_EEPROM
 197 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 198 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 199
 200 #ifndef CONFIG_TRAILBLAZER
 201 /*
 202  * eSPI - Enhanced SPI
 203  */
 204 #define CONFIG_HARD_SPI
 205
 206 #define CONFIG_SF_DEFAULT_SPEED         10000000
 207 #define CONFIG_SF_DEFAULT_MODE          0
 208 #endif
 209
 210 #define CONFIG_SHA1
 211
 212 /*
 213  * MMC
 214  */
 215 #define CONFIG_MMC
 216 #define CONFIG_GENERIC_MMC
 217
 218 #define CONFIG_FSL_ESDHC
 219 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 220
 221 #ifndef CONFIG_TRAILBLAZER
 222
 223 /*
 224  * Video
 225  */
 226 #define CONFIG_FSL_DIU_FB
 227 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 228 #define CONFIG_CMD_BMP
 229
 230 /*
 231  * General PCI
 232  * Memory space is mapped 1-1, but I/O space must start from 0.
 233  */
 234 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 235 #define CONFIG_PCI_INDIRECT_BRIDGE
 236 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 237 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 238 #define CONFIG_CMD_PCI
 239
 240 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 241 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 242
 243 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 244 #ifdef CONFIG_PHYS_64BIT
 245 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 246 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 247 #else
 248 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 249 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 250 #endif
 251 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 252 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 253 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 254 #ifdef CONFIG_PHYS_64BIT
 255 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 256 #else
 257 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 258 #endif
 259 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 260
 261 /*
 262  * SATA
 263  */
 264 #define CONFIG_LIBATA
 265 #define CONFIG_LBA48
 266 #define CONFIG_CMD_SATA
 267
 268 #define CONFIG_FSL_SATA
 269 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 270 #define CONFIG_SATA1
 271 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 272 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 273 #define CONFIG_SATA2
 274 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 275 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 276
 277 /*
 278  * Ethernet
 279  */
 280 #define CONFIG_TSEC_ENET
 281
 282 #define CONFIG_TSECV2
 283
 284 #define CONFIG_MII                      /* MII PHY management */
 285 #define CONFIG_TSEC1            1
 286 #define CONFIG_TSEC1_NAME       "eTSEC1"
 287 #define CONFIG_TSEC2            1
 288 #define CONFIG_TSEC2_NAME       "eTSEC2"
 289
 290 #define TSEC1_PHY_ADDR          0
 291 #define TSEC2_PHY_ADDR          1
 292
 293 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 294 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 295
 296 #define TSEC1_PHYIDX            0
 297 #define TSEC2_PHYIDX            0
 298
 299 #define CONFIG_ETHPRIME         "eTSEC1"
 300
 301 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 302
 303 /*
 304  * USB
 305  */
 306 #define CONFIG_USB_EHCI
 307
 308 #define CONFIG_HAS_FSL_DR_USB
 309 #define CONFIG_USB_EHCI_FSL
 310 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 311
 312 #endif /* CONFIG_TRAILBLAZER */
 313
 314 /*
 315  * Environment
 316  */
 317 #if defined(CONFIG_TRAILBLAZER)
 318 #define CONFIG_ENV_IS_NOWHERE
 319 #define CONFIG_ENV_SIZE         0x2000          /* 8KB */
 320 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 321 #define CONFIG_ENV_IS_IN_SPI_FLASH
 322 #define CONFIG_ENV_SPI_BUS      0
 323 #define CONFIG_ENV_SPI_CS       0
 324 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 325 #define CONFIG_ENV_SPI_MODE     0
 326 #define CONFIG_ENV_SIZE         0x2000          /* 8KB */
 327 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 328 #define CONFIG_ENV_SECT_SIZE    0x10000
 329 #elif defined(CONFIG_RAMBOOT_SDCARD)
 330 #define CONFIG_ENV_IS_IN_MMC
 331 #define CONFIG_FSL_FIXED_MMC_LOCATION
 332 #define CONFIG_ENV_SIZE         0x2000
 333 #define CONFIG_SYS_MMC_ENV_DEV  0
 334 #endif
 335
 336 #define CONFIG_SYS_EXTRA_ENV_RELOC
 337
 338 /*
 339  * Command line configuration.
 340  */
 341 #ifndef CONFIG_TRAILBLAZER
 342 #define CONFIG_SYS_LONGHELP
 343 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 344 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 345 #endif /* CONFIG_TRAILBLAZER */
 346
 347 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 348 #ifdef CONFIG_CMD_KGDB
 349 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 350 #else
 351 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 352 #endif
 353 /* Print Buffer Size */
 354 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 355 #define CONFIG_SYS_MAXARGS      16
 356 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 357
 358 #ifndef CONFIG_TRAILBLAZER
 359
 360 #define CONFIG_CMD_ERRATA
 361 #define CONFIG_CMD_IRQ
 362 #define CONFIG_CMD_REGINFO
 363
 364 /*
 365  * Board initialisation callbacks
 366  */
 367 #define CONFIG_BOARD_EARLY_INIT_F
 368 #define CONFIG_BOARD_EARLY_INIT_R
 369 #define CONFIG_MISC_INIT_R
 370 #define CONFIG_LAST_STAGE_INIT
 371
 372 #else /* CONFIG_TRAILBLAZER */
 373
 374 #define CONFIG_BOARD_EARLY_INIT_F
 375 #define CONFIG_BOARD_EARLY_INIT_R
 376 #define CONFIG_LAST_STAGE_INIT
 377
 378 #endif /* CONFIG_TRAILBLAZER */
 379
 380 /*
 381  * Miscellaneous configurable options
 382  */
 383 #define CONFIG_HW_WATCHDOG
 384 #define CONFIG_LOADS_ECHO
 385 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 386 #define CONFIG_DOS_PARTITION
 387
 388 /*
 389  * For booting Linux, the board info and command line data
 390  * have to be in the first 64 MB of memory, since this is
 391  * the maximum mapped by the Linux kernel during initialization.
 392  */
 393 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Linux Memory map */
 394 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 395
 396 /*
 397  * Environment Configuration
 398  */
 399
 400 #ifdef CONFIG_TRAILBLAZER
 401
 402 #define CONFIG_BAUDRATE 115200
 403
 404 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 405         "mp_holdoff=1\0"
 406
 407 #else
 408
 409 #define CONFIG_HOSTNAME         controlcenterd
 410 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 411 #define CONFIG_BOOTFILE         "uImage"
 412 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP */
 413
 414 #define CONFIG_LOADADDR         1000000
 415
 416
 417 #define CONFIG_BAUDRATE 115200
 418
 419 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 420         "netdev=eth0\0"                                         \
 421         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 422         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 423         "tftpflash=tftpboot $loadaddr $uboot && "               \
 424                 "protect off $ubootaddr +$filesize && "         \
 425                 "erase $ubootaddr +$filesize && "               \
 426                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 427                 "protect on $ubootaddr +$filesize && "          \
 428                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 429         "consoledev=ttyS1\0"                                    \
 430         "ramdiskaddr=2000000\0"                                 \
 431         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 432         "fdtaddr=1e00000\0"                                     \
 433         "fdtfile=controlcenterd.dtb\0"                          \
 434         "bdev=sda3\0"
 435
 436 /* these are used and NUL-terminated in env_default.h */
 437 #define CONFIG_NFSBOOTCOMMAND                                           \
 438         "setenv bootargs root=/dev/nfs rw "                             \
 439         "nfsroot=$serverip:$rootpath "                                  \
 440         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 441         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 442         "tftp $loadaddr $bootfile;"                                     \
 443         "tftp $fdtaddr $fdtfile;"                                       \
 444         "bootm $loadaddr - $fdtaddr"
 445
 446 #define CONFIG_RAMBOOTCOMMAND                                           \
 447         "setenv bootargs root=/dev/ram rw "                             \
 448         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 449         "tftp $ramdiskaddr $ramdiskfile;"                               \
 450         "tftp $loadaddr $bootfile;"                                     \
 451         "tftp $fdtaddr $fdtfile;"                                       \
 452         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 453
 454 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 455
 456 #endif /* CONFIG_TRAILBLAZER */
 457
 458 #endif