2 * Copyright 2015-2016 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 modules.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/imx-regs.h>
18 #define CONFIG_SYS_THUMB_BUILD
19 #define CONFIG_SYS_FSL_CLK
21 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
23 #define CONFIG_SKIP_LOWLEVEL_INIT
25 #define CONFIG_CMD_FUSE
26 #ifdef CONFIG_CMD_FUSE
27 #define CONFIG_MXC_OCOTP
30 /* Size of malloc() pool */
31 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
33 /* Allow to overwrite serial and ethaddr */
34 #define CONFIG_ENV_OVERWRITE
35 #define CONFIG_ENV_VARS_UBOOT_CONFIG
36 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
37 #define CONFIG_BAUDRATE 115200
40 #define CONFIG_CMD_NAND
41 #define CONFIG_SYS_NAND_ONFI_DETECTION
42 #define CONFIG_SYS_MAX_NAND_DEVICE 1
43 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
45 /* Dynamic MTD partition support */
46 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
47 #define CONFIG_MTD_PARTITIONS
48 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
49 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
50 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
56 #define CONFIG_FSL_ESDHC
57 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
58 #define CONFIG_SYS_FSL_ESDHC_NUM 1
60 #define CONFIG_GENERIC_MMC
61 #define CONFIG_DOS_PARTITION
65 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
67 #define CONFIG_FEC_MXC
69 #define IMX_FEC_BASE ENET1_BASE_ADDR
70 #define CONFIG_FEC_XCV_TYPE RMII
71 #define CONFIG_FEC_MXC_PHYADDR 0
73 #define CONFIG_PHY_MICREL
75 #define CONFIG_IPADDR 192.168.10.2
76 #define CONFIG_NETMASK 255.255.255.0
77 #define CONFIG_SERVERIP 192.168.10.1
79 #define CONFIG_LOADADDR 0x80008000
80 #define CONFIG_FDTADDR 0x84000000
82 /* We boot from the gfxRAM area of the OCRAM. */
83 #define CONFIG_SYS_TEXT_BASE 0x3f408000
84 #define CONFIG_BOARD_SIZE_LIMIT 524288
87 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
88 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
89 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
90 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
91 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
92 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
95 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
96 "nfsboot=run setup; " \
97 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
98 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
99 "dhcp ${kernel_addr_r} && " \
100 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
101 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
103 #define UBI_BOOTCMD \
104 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
105 "ubi.fm_autoconvert=1\0" \
106 "ubiboot=run setup; " \
107 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
108 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
110 "ubi read ${kernel_addr_r} kernel && " \
111 "ubi read ${fdt_addr_r} dtb && " \
112 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
114 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
116 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
118 #define CONFIG_EXTRA_ENV_SETTINGS \
119 "kernel_addr_r=0x82000000\0" \
120 "fdt_addr_r=0x84000000\0" \
121 "kernel_file=zImage\0" \
122 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
123 "fdt_board=eval-v3\0" \
127 "setup=setenv setupargs " \
128 "console=tty1 console=${console}" \
129 ",${baudrate}n8 ${memargs}\0" \
130 "setsdupdate=mmc rescan && set interface mmc && " \
131 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
132 "source ${loadaddr}\0" \
133 "setusbupdate=usb start && set interface usb && " \
134 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
135 "source ${loadaddr}\0" \
136 "setupdate=run setsdupdate || run setusbupdate\0" \
137 "mtdparts=" MTDPARTS_DEFAULT "\0" \
138 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
143 /* Miscellaneous configurable options */
144 #define CONFIG_SYS_LONGHELP /* undef to save memory */
145 #undef CONFIG_AUTO_COMPLETE
146 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
147 #define CONFIG_SYS_PBSIZE \
148 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
149 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
150 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
152 #define CONFIG_SYS_MEMTEST_START 0x80010000
153 #define CONFIG_SYS_MEMTEST_END 0x87C00000
155 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
156 #define CONFIG_SYS_HZ 1000
157 #define CONFIG_CMDLINE_EDITING
161 * The stack sizes are set up in start.S using the settings below
163 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
165 /* Physical memory map */
166 #define CONFIG_NR_DRAM_BANKS 1
167 #define PHYS_SDRAM (0x80000000)
168 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
170 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
171 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
172 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
174 #define CONFIG_SYS_INIT_SP_OFFSET \
175 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
176 #define CONFIG_SYS_INIT_SP_ADDR \
177 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
179 /* Environment organization */
180 #define CONFIG_SYS_NO_FLASH
182 #ifdef CONFIG_ENV_IS_IN_MMC
183 #define CONFIG_SYS_MMC_ENV_DEV 0
184 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
185 #define CONFIG_ENV_SIZE (8 * 1024)
188 #ifdef CONFIG_ENV_IS_IN_NAND
189 #define CONFIG_ENV_SIZE (64 * 2048)
190 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
191 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
194 #define CONFIG_SYS_NO_FLASH
196 /* USB Host Support */
197 #define CONFIG_USB_EHCI
198 #define CONFIG_USB_EHCI_VF
199 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
200 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
203 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
206 #define CONFIG_USB_FUNCTION_MASS_STORAGE
208 #endif /* __CONFIG_H */