1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2015-2019 Toradex, Inc.
5 * Configuration settings for the Toradex VF50/VF61 modules.
8 * Copyright 2013 Freescale Semiconductor, Inc.
14 #include <asm/arch/imx-regs.h>
15 #include <linux/sizes.h>
18 #define CONFIG_SYS_MAX_NAND_DEVICE 1
20 #define CONFIG_IPADDR 192.168.10.2
21 #define CONFIG_NETMASK 255.255.255.0
22 #define CONFIG_SERVERIP 192.168.10.1
24 #define CONFIG_FDTADDR 0x84000000
26 /* We boot from the gfxRAM area of the OCRAM. */
27 #define CONFIG_BOARD_SIZE_LIMIT 520192
29 #define MEM_LAYOUT_ENV_SETTINGS \
30 "bootm_size=0x10000000\0" \
31 "fdt_addr_r=0x82000000\0" \
32 "kernel_addr_r=0x81000000\0" \
33 "pxefile_addr_r=0x87100000\0" \
34 "ramdisk_addr_r=0x82100000\0" \
35 "scriptaddr=0x87000000\0"
37 #define UBOOT_UPDATE \
38 "update_uboot=nand erase.part u-boot && " \
39 "nand write ${loadaddr} u-boot ${filesize}\0" \
42 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
43 "nfsboot=run setup; " \
44 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
45 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
46 "dhcp ${kernel_addr_r} && " \
47 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
48 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
51 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
52 "ubi.fm_autoconvert=1\0" \
53 "ubiboot=run setup; " \
54 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
55 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
57 "ubi read ${kernel_addr_r} kernel && " \
58 "ubi read ${fdt_addr_r} dtb && " \
59 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
61 #define BOOT_TARGET_DEVICES(func) \
65 #include <config_distro_bootcmd.h>
66 #undef BOOTENV_RUN_NET_USB_START
67 #define BOOTENV_RUN_NET_USB_START ""
69 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
71 #define CONFIG_EXTRA_ENV_SETTINGS \
73 MEM_LAYOUT_ENV_SETTINGS \
78 "defargs=user_debug=30\0" \
79 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
80 "fdt_board=eval-v3\0" \
82 "kernel_image=zImage\0" \
83 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
84 "setsdupdate=mmc rescan && set interface mmc && " \
85 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
86 "source ${loadaddr}\0" \
87 "setup=setenv setupargs console=tty1 console=${console}" \
88 ",${baudrate}n8 ${memargs}\0" \
89 "setupdate=run setsdupdate || run setusbupdate\0" \
90 "setusbupdate=usb start && set interface usb && " \
91 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
92 "source ${loadaddr}\0" \
94 "video-mode=dcufb:640x480-16@60,monitor=lcd\0"
96 /* Miscellaneous configurable options */
97 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
98 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
100 /* Physical memory map */
101 #define PHYS_SDRAM (0x80000000)
102 #define PHYS_SDRAM_SIZE (256 * SZ_1M)
104 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
105 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
106 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
108 #define CONFIG_SYS_INIT_SP_OFFSET \
109 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
110 #define CONFIG_SYS_INIT_SP_ADDR \
111 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
113 /* Environment organization */
114 #ifdef CONFIG_ENV_IS_IN_NAND
115 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
118 /* USB Host Support */
119 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
120 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
124 #endif /* __CONFIG_H */