include/configs/colibri_vf.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2015-2019 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex VF50/VF61 modules.
   6  *
   7  * Based on vf610twr.h:
   8  * Copyright 2013 Freescale Semiconductor, Inc.
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <asm/arch/imx-regs.h>
  15 #include <linux/sizes.h>
  16
  17 #define CONFIG_SYS_FSL_CLK
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20
  21 #ifdef CONFIG_VIDEO_FSL_DCU_FB
  22 #define CONFIG_SPLASH_SCREEN_ALIGN
  23 #define CONFIG_VIDEO_LOGO
  24 #define CONFIG_VIDEO_BMP_LOGO
  25 #define CONFIG_SYS_FSL_DCU_LE
  26
  27 #define CONFIG_SYS_DCU_ADDR             DCU0_BASE_ADDR
  28 #define DCU_LAYER_MAX_NUM               64
  29 #endif
  30
  31 /* Size of malloc() pool */
  32 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * SZ_1M)
  33
  34 /* Allow to overwrite serial and ethaddr */
  35 #define CONFIG_ENV_OVERWRITE
  36
  37 /* NAND support */
  38 #define CONFIG_SYS_NAND_ONFI_DETECTION
  39 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  40
  41 #define CONFIG_IPADDR           192.168.10.2
  42 #define CONFIG_NETMASK          255.255.255.0
  43 #define CONFIG_SERVERIP         192.168.10.1
  44
  45 #define CONFIG_LOADADDR                 0x80008000
  46 #define CONFIG_FDTADDR                  0x84000000
  47
  48 /* We boot from the gfxRAM area of the OCRAM. */
  49 #define CONFIG_BOARD_SIZE_LIMIT         520192
  50
  51 #define MEM_LAYOUT_ENV_SETTINGS \
  52         "bootm_size=0x10000000\0" \
  53         "fdt_addr_r=0x82000000\0" \
  54         "fdt_high=0xffffffff\0" \
  55         "initrd_high=0xffffffff\0" \
  56         "kernel_addr_r=0x81000000\0" \
  57         "pxefile_addr_r=0x87100000\0" \
  58         "ramdisk_addr_r=0x82100000\0" \
  59         "scriptaddr=0x87000000\0"
  60
  61 #define NFS_BOOTCMD \
  62         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  63         "nfsboot=run setup; " \
  64         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
  65         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  66         "dhcp ${kernel_addr_r} && "     \
  67         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  68         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  69
  70 #define SD_BOOTCMD \
  71         "sdargs=root=/dev/mmcblk0p2 ro rootwait\0"      \
  72         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  73         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  74         "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
  75         "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
  76         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  77
  78 #define UBI_BOOTCMD \
  79         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
  80         "ubi.fm_autoconvert=1\0" \
  81         "ubiboot=run setup; " \
  82         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
  83         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
  84         "ubi part ubi && " \
  85         "ubi read ${kernel_addr_r} kernel && " \
  86         "ubi read ${fdt_addr_r} dtb && " \
  87         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  88
  89 #define CONFIG_BOOTCOMMAND "run ubiboot; " \
  90         "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
  91
  92 #define BOOT_TARGET_DEVICES(func) \
  93         func(MMC, mmc, 0) \
  94         func(USB, usb, 0) \
  95         func(DHCP, dhcp, na)
  96 #include <config_distro_bootcmd.h>
  97 #undef BOOTENV_RUN_NET_USB_START
  98 #define BOOTENV_RUN_NET_USB_START ""
  99
 100 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 101
 102 #define CONFIG_EXTRA_ENV_SETTINGS \
 103         BOOTENV \
 104         MEM_LAYOUT_ENV_SETTINGS \
 105         NFS_BOOTCMD \
 106         SD_BOOTCMD \
 107         UBI_BOOTCMD \
 108         "console=ttyLP0\0" \
 109         "defargs=user_debug=30\0" \
 110         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 111         "fdt_board=eval-v3\0" \
 112         "fdt_fixup=;\0" \
 113         "kernel_file=zImage\0" \
 114         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 115         "setsdupdate=mmc rescan && set interface mmc && " \
 116                 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 117                 "source ${loadaddr}\0" \
 118         "setup=setenv setupargs console=tty1 console=${console}" \
 119                 ",${baudrate}n8 ${memargs}\0" \
 120         "setupdate=run setsdupdate || run setusbupdate\0" \
 121         "setusbupdate=usb start && set interface usb && " \
 122                 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 123                 "source ${loadaddr}\0" \
 124         "splashpos=m,m\0" \
 125         "video-mode=dcufb:640x480-16@60,monitor=lcd\0"
 126
 127 /* Miscellaneous configurable options */
 128 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 129 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 130
 131 #define CONFIG_SYS_MEMTEST_START        0x80010000
 132 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 133
 134 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 135 #define CONFIG_SYS_HZ                   1000
 136
 137 /* Physical memory map */
 138 #define PHYS_SDRAM                      (0x80000000)
 139 #define PHYS_SDRAM_SIZE                 (256 * SZ_1M)
 140
 141 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 142 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 143 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 144
 145 #define CONFIG_SYS_INIT_SP_OFFSET \
 146         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 147 #define CONFIG_SYS_INIT_SP_ADDR \
 148         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 149
 150 /* Environment organization */
 151 #ifdef CONFIG_ENV_IS_IN_NAND
 152 #define CONFIG_ENV_SIZE                 (64 * 2048)
 153 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 154 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 155 #endif
 156
 157 /* USB Host Support */
 158 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 159 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 160
 161 /* USB DFU */
 162 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
 163
 164 #endif /* __CONFIG_H */