1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2016-2018 Toradex AG
5 * Configuration settings for the Colibri iMX7 module.
7 * based on mx7dsabresd.h:
8 * Copyright (C) 2015 Freescale Semiconductor, Inc.
11 #ifndef __COLIBRI_IMX7_CONFIG_H
12 #define __COLIBRI_IMX7_CONFIG_H
14 #include "mx7_common.h"
16 /* Size of malloc() pool */
17 #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
20 #define CONFIG_FEC_MXC
21 #define CONFIG_FEC_XCV_TYPE RMII
22 #define CONFIG_ETHPRIME "FEC"
23 #define CONFIG_FEC_MXC_PHYADDR 0
25 #define CONFIG_IP_DEFRAG
26 #define CONFIG_TFTP_BLOCKSIZE 16352
27 #define CONFIG_TFTP_TSIZE
30 #define IMX_FEC_BASE ENET_IPS_BASE_ADDR
33 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
34 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
35 #define CONFIG_SYS_FSL_USDHC_NUM 1
36 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
37 #define CONFIG_SYS_FSL_USDHC_NUM 2
40 #undef CONFIG_BOOTM_PLAN9
41 #undef CONFIG_BOOTM_RTEMS
44 #define CONFIG_SYS_I2C_MXC
45 #define CONFIG_SYS_I2C_SPEED 100000
47 #define CONFIG_IPADDR 192.168.10.2
48 #define CONFIG_NETMASK 255.255.255.0
49 #define CONFIG_SERVERIP 192.168.10.1
51 #define EMMC_BOOTCMD \
52 "emmcargs=ip=off root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait\0" \
53 "emmcboot=run setup; " \
54 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
55 "${vidargs}; echo Booting from internal eMMC chip...; " \
57 "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-emmc-${fdt_board}.dtb && " \
58 "load mmc 0:1 ${kernel_addr_r} ${boot_file} && " \
59 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
61 #define MEM_LAYOUT_ENV_SETTINGS \
62 "bootm_size=0x10000000\0" \
63 "fdt_addr_r=0x82000000\0" \
64 "fdt_high=0xffffffff\0" \
65 "initrd_high=0xffffffff\0" \
66 "kernel_addr_r=0x81000000\0" \
67 "ramdisk_addr_r=0x82100000\0"
69 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
71 "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
72 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
73 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
75 "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
76 "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
77 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
78 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
80 "sdargs=root=/dev/mmcblk1p2 ro rootwait\0" \
81 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
82 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
84 "load mmc 1:1 ${kernel_addr_r} ${kernel_file} && " \
85 "load mmc 1:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
86 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
91 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
92 "nfsboot=run setup; " \
93 "setenv bootargs ${defargs} ${nfsargs} " \
94 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
95 "dhcp ${kernel_addr_r} && " \
96 "tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
97 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
100 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
101 "ubi.fm_autoconvert=1\0" \
102 "ubiboot=run setup; " \
103 "setenv bootargs ${defargs} ${ubiargs} " \
104 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
105 "ubi part ubi && run m4boot && " \
106 "ubi read ${kernel_addr_r} kernel && " \
107 "ubi read ${fdt_addr_r} dtb && " \
108 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
110 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
111 #define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \
112 "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
113 #define MODULE_EXTRA_ENV_SETTINGS \
114 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
116 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
117 #define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
118 "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
119 #define MODULE_EXTRA_ENV_SETTINGS \
124 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
125 #define BOOT_TARGET_DEVICES(func) \
129 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
130 #define BOOT_TARGET_DEVICES(func) \
136 #include <config_distro_bootcmd.h>
138 #define CONFIG_EXTRA_ENV_SETTINGS \
140 MEM_LAYOUT_ENV_SETTINGS \
143 MODULE_EXTRA_ENV_SETTINGS \
144 "boot_file=zImage\0" \
145 "console=ttymxc0\0" \
147 "fdt_board=eval-v3\0" \
151 "kernel_file=zImage\0" \
152 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
153 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
154 "${board}/flash_eth.img && source ${loadaddr}\0" \
155 "setsdupdate=mmc rescan && setenv interface mmc && " \
156 "fatload ${interface} 0:1 ${loadaddr} " \
157 "${board}/flash_blk.img && source ${loadaddr}\0" \
158 "setup=setenv setupargs " \
159 "console=tty1 console=${console}" \
160 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
161 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
162 "setusbupdate=usb start && setenv interface usb && " \
163 "fatload ${interface} 0:1 ${loadaddr} " \
164 "${board}/flash_blk.img && source ${loadaddr}\0" \
166 "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
169 /* Miscellaneous configurable options */
171 #define CONFIG_SYS_MEMTEST_START 0x80000000
172 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
174 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
175 #define CONFIG_SYS_HZ 1000
177 /* Physical Memory Map */
178 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
180 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
181 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
182 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
184 #define CONFIG_SYS_INIT_SP_OFFSET \
185 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
186 #define CONFIG_SYS_INIT_SP_ADDR \
187 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
189 /* environment organization */
191 #if defined(CONFIG_ENV_IS_IN_MMC)
192 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
193 #define CONFIG_ENV_SIZE (8 * 1024)
194 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
195 CONFIG_TDX_CFG_BLOCK_OFFSET)
196 #define CONFIG_SYS_MMC_ENV_DEV 0
197 #define CONFIG_SYS_MMC_ENV_PART 1
198 #elif defined(CONFIG_ENV_IS_IN_NAND)
199 #define CONFIG_ENV_SECT_SIZE (128 * 1024)
200 #define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE)
201 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
204 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
206 #define CONFIG_SYS_MAX_NAND_DEVICE 1
207 #define CONFIG_SYS_NAND_BASE 0x40000000
208 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
209 #define CONFIG_SYS_NAND_ONFI_DETECTION
210 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
214 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
216 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
217 #define CONFIG_MXC_USB_FLAGS 0
218 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
220 #define CONFIG_IMX_THERMAL
222 #define CONFIG_USBD_HS
224 /* USB Device Firmware Update support */
225 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
226 #define DFU_DEFAULT_POLL_TIMEOUT 300
229 #define CONFIG_VIDEO_MXS
230 #define CONFIG_VIDEO_LOGO
231 #define CONFIG_SPLASH_SCREEN
232 #define CONFIG_SPLASH_SCREEN_ALIGN
233 #define CONFIG_BMP_16BPP
234 #define CONFIG_VIDEO_BMP_RLE8
235 #define CONFIG_VIDEO_BMP_LOGO