2 * Copyright 2016 Toradex AG
4 * Configuration settings for the Colibri iMX7 module.
6 * based on mx7dsabresd.h:
7 * Copyright (C) 2015 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __COLIBRI_IMX7_CONFIG_H
13 #define __COLIBRI_IMX7_CONFIG_H
15 #include "mx7_common.h"
17 #define CONFIG_SYS_THUMB_BUILD
18 #define CONFIG_USE_ARCH_MEMCPY
19 #define CONFIG_USE_ARCH_MEMSET
21 /*#define CONFIG_DBG_MONITOR*/
22 #define PHYS_SDRAM_SIZE SZ_512M
24 #define CONFIG_ARCH_MISC_INIT
25 #define CONFIG_BOARD_EARLY_INIT_F
26 #define CONFIG_BOARD_LATE_INIT
28 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
30 #define CONFIG_ENV_VARS_UBOOT_CONFIG
31 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
36 #define CONFIG_CMD_BMODE
39 #define CONFIG_FEC_MXC
41 #define CONFIG_FEC_XCV_TYPE RMII
42 #define CONFIG_ETHPRIME "FEC"
43 #define CONFIG_FEC_MXC_PHYADDR 0
46 #define CONFIG_PHY_MICREL
47 #define CONFIG_IP_DEFRAG
48 #define CONFIG_TFTP_BLOCKSIZE 16352
49 #define CONFIG_TFTP_TSIZE
52 #define IMX_FEC_BASE ENET_IPS_BASE_ADDR
55 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
56 #define CONFIG_SYS_FSL_USDHC_NUM 1
58 #undef CONFIG_BOOTM_PLAN9
59 #undef CONFIG_BOOTM_RTEMS
62 #define CONFIG_SYS_I2C_MXC
63 #define CONFIG_SYS_I2C_SPEED 100000
65 #define CONFIG_IPADDR 192.168.10.2
66 #define CONFIG_NETMASK 255.255.255.0
67 #define CONFIG_SERVERIP 192.168.10.1
69 #define MEM_LAYOUT_ENV_SETTINGS \
70 "fdt_addr_r=0x82000000\0" \
71 "fdt_high=0xffffffff\0" \
72 "initrd_high=0xffffffff\0" \
73 "kernel_addr_r=0x81000000\0" \
74 "ramdisk_addr_r=0x82100000\0"
77 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
78 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
79 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
81 "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
82 "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
83 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
86 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
87 "nfsboot=run setup; " \
88 "setenv bootargs ${defargs} ${nfsargs} " \
89 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
90 "dhcp ${kernel_addr_r} && " \
91 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
92 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
95 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
96 "ubi.fm_autoconvert=1\0" \
97 "ubiboot=run setup; " \
98 "setenv bootargs ${defargs} ${ubiargs} " \
99 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
100 "ubi part ubi && run m4boot && " \
101 "ubi read ${kernel_addr_r} kernel && " \
102 "ubi read ${fdt_addr_r} dtb && " \
103 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
105 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
107 #define CONFIG_EXTRA_ENV_SETTINGS \
108 MEM_LAYOUT_ENV_SETTINGS \
112 "console=ttymxc0\0" \
114 "fdt_board=eval-v3\0" \
118 "kernel_file=zImage\0" \
119 "mtdparts=" MTDPARTS_DEFAULT "\0" \
120 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
121 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
122 "${board}/flash_eth.img && source ${loadaddr}\0" \
123 "setsdupdate=mmc rescan && setenv interface mmc && " \
124 "fatload ${interface} 0:1 ${loadaddr} " \
125 "${board}/flash_blk.img && source ${loadaddr}\0" \
126 "setup=setenv setupargs " \
127 "console=tty1 console=${console}" \
128 ",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
129 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
130 "setusbupdate=usb start && setenv interface usb && " \
131 "fatload ${interface} 0:1 ${loadaddr} " \
132 "${board}/flash_blk.img && source ${loadaddr}\0" \
134 "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
136 /* Miscellaneous configurable options */
137 #define CONFIG_SYS_LONGHELP
139 #define CONFIG_SYS_MEMTEST_START 0x80000000
140 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
142 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
143 #define CONFIG_SYS_HZ 1000
145 #define CONFIG_STACKSIZE SZ_128K
147 /* Physical Memory Map */
148 #define CONFIG_NR_DRAM_BANKS 1
149 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
151 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
152 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
153 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
155 #define CONFIG_SYS_INIT_SP_OFFSET \
156 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
157 #define CONFIG_SYS_INIT_SP_ADDR \
158 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
160 /* FLASH and environment organization */
161 #define CONFIG_SYS_NO_FLASH
162 #define CONFIG_ENV_IS_IN_NAND
164 #if defined(CONFIG_ENV_IS_IN_MMC)
165 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
166 #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
167 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
168 #define CONFIG_ENV_OFFSET (8 * SZ_64K)
169 #elif defined(CONFIG_ENV_IS_IN_NAND)
170 #define CONFIG_ENV_OFFSET (4 * 1024 * 1024)
171 #define CONFIG_ENV_SECT_SIZE (128 * 1024)
172 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
175 #define CONFIG_NAND_MXS
176 #define CONFIG_CMD_NAND_TRIMFFS
179 #define CONFIG_SYS_MAX_NAND_DEVICE 1
180 #define CONFIG_SYS_NAND_BASE 0x40000000
181 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
182 #define CONFIG_SYS_NAND_ONFI_DETECTION
183 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
184 #define CONFIG_CMD_NAND_TORTURE
187 #define CONFIG_RBTREE
189 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
191 /* Dynamic MTD partition support */
192 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
193 #define CONFIG_MTD_PARTITIONS
194 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
195 #define MTDIDS_DEFAULT "nand0=gpmi-nand"
196 #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
199 "512k(u-boot-env)," \
202 /* DMA stuff, needed for GPMI/MXS NAND support */
203 #define CONFIG_APBH_DMA
204 #define CONFIG_APBH_DMA_BURST
205 #define CONFIG_APBH_DMA_BURST8
208 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
210 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
211 #define CONFIG_MXC_USB_FLAGS 0
212 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
214 #define CONFIG_IMX_THERMAL
216 #define CONFIG_USBD_HS
218 #define CONFIG_USB_FUNCTION_MASS_STORAGE
220 /* USB Device Firmware Update support */
221 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
222 #define DFU_DEFAULT_POLL_TIMEOUT 300
225 #define CONFIG_VIDEO_MXS
226 #define CONFIG_VIDEO_LOGO
227 #define CONFIG_SPLASH_SCREEN
228 #define CONFIG_SPLASH_SCREEN_ALIGN
229 #define CONFIG_CMD_BMP
230 #define CONFIG_BMP_16BPP
231 #define CONFIG_VIDEO_BMP_RLE8
232 #define CONFIG_VIDEO_BMP_LOGO