Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig
[platform/kernel/u-boot.git] / include / configs / colibri_imx6.h
1 /*
2  * Copyright 2013-2015 Toradex, Inc.
3  *
4  * Configuration settings for the Toradex Colibri iMX6
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #include "mx6_common.h"
13
14 #undef CONFIG_DISPLAY_BOARDINFO
15 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
16
17 #define CONFIG_SYS_GENERIC_BOARD
18
19 #include <asm/arch/imx-regs.h>
20 #include <asm/mach-imx/gpio.h>
21
22 #ifdef CONFIG_SPL
23 #include "imx6_spl.h"
24 #define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
25 #endif
26
27 #define CONFIG_CMDLINE_TAG
28 #define CONFIG_SETUP_MEMORY_TAGS
29 #define CONFIG_INITRD_TAG
30 #define CONFIG_REVISION_TAG
31 #define CONFIG_SERIAL_TAG
32
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
35
36 #define CONFIG_MISC_INIT_R
37
38 #define CONFIG_MXC_UART
39 #define CONFIG_MXC_UART_BASE            UART1_BASE
40
41 /* Make the HW version stuff available in U-Boot env */
42 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
43 #define CONFIG_ENV_VARS_UBOOT_CONFIG
44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
45
46 /* I2C Configs */
47 #define CONFIG_SYS_I2C
48 #define CONFIG_SYS_I2C_MXC
49 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
50 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
51 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
52 #define CONFIG_SYS_I2C_SPEED            100000
53
54 /* OCOTP Configs */
55 #ifdef CONFIG_CMD_FUSE
56 #define CONFIG_MXC_OCOTP
57 #endif
58
59 /* MMC Configs */
60 #define CONFIG_FSL_ESDHC
61 #define CONFIG_FSL_USDHC
62 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
63 #define CONFIG_SYS_FSL_USDHC_NUM        2
64
65 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
66 #define CONFIG_BOUNCE_BUFFER
67
68 /* Network */
69 #define CONFIG_FEC_MXC
70 #define CONFIG_MII
71 #define IMX_FEC_BASE                    ENET_BASE_ADDR
72 #define CONFIG_FEC_XCV_TYPE             RMII
73 #define CONFIG_ETHPRIME                 "FEC"
74 #define CONFIG_FEC_MXC_PHYADDR          1
75 #define CONFIG_IP_DEFRAG
76 #define CONFIG_TFTP_BLOCKSIZE           16352
77 #define CONFIG_TFTP_TSIZE
78
79 /* USB Configs */
80 /* Host */
81 #define CONFIG_USB_HOST_ETHER
82 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
83 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
84 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
85 #define CONFIG_MXC_USB_FLAGS            0
86 #define CONFIG_USB_KEYBOARD
87 #ifdef CONFIG_USB_KEYBOARD
88 #define CONFIG_SYS_USB_EVENT_POLL
89 #endif /* CONFIG_USB_KEYBOARD */
90 /* Client */
91 #define CONFIG_USB_GADGET_VBUS_DRAW     2
92 #define CONFIG_USBD_HS
93
94 #define CONFIG_USB_GADGET_MASS_STORAGE
95 #define CONFIG_USB_FUNCTION_MASS_STORAGE
96 #define CONFIG_G_DNL_MANUFACTURER       "Toradex"
97 /* USB DFU */
98 #define CONFIG_DFU_MMC
99
100 /* Miscellaneous commands */
101 #define CONFIG_MXC_GPIO
102
103 /* Framebuffer and LCD */
104 #define CONFIG_VIDEO_IPUV3
105 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
106 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
107 #define CONFIG_VIDEO_BMP_RLE8
108 #define CONFIG_SPLASH_SCREEN
109 #define CONFIG_SPLASH_SCREEN_ALIGN
110 #define CONFIG_BMP_16BPP
111 #define CONFIG_VIDEO_LOGO
112 #define CONFIG_VIDEO_BMP_LOGO
113 #define CONFIG_IPUV3_CLK                260000000
114 #define CONFIG_CONSOLE_MUX
115 #define CONFIG_IMX_HDMI
116 #define CONFIG_IMX_VIDEO_SKIP
117
118 /* allow to overwrite serial and ethaddr */
119 #define CONFIG_ENV_OVERWRITE
120 #define CONFIG_CONS_INDEX               1
121
122 /* Command definition */
123 #undef CONFIG_CMD_LOADB
124 #undef CONFIG_CMD_LOADS
125 #undef CONFIG_CMD_NFS
126 #undef CONFIG_CMD_FLASH
127
128 #undef CONFIG_IPADDR
129 #define CONFIG_IPADDR                   192.168.10.2
130 #define CONFIG_NETMASK                  255.255.255.0
131 #undef CONFIG_SERVERIP
132 #define CONFIG_SERVERIP                 192.168.10.1
133
134 #define CONFIG_LOADADDR                 0x12000000
135 #define CONFIG_SYS_TEXT_BASE            0x17800000
136
137 #ifdef CONFIG_CMD_MMC
138 #define CONFIG_DRIVE_MMC "mmc "
139 #else
140 #define CONFIG_DRIVE_MMC
141 #endif
142
143 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
144
145 #define DFU_ALT_EMMC_INFO \
146         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
147         "boot part 0 1;" \
148         "rootfs part 0 2;" \
149         "uImage fat 0 1;" \
150         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
151         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
152
153 #define EMMC_BOOTCMD \
154         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
155                 "rootwait\0" \
156         "emmcboot=run setup; " \
157                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
158                 "${vidargs}; echo Booting from internal eMMC chip...; " \
159                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
160                 "${boot_file} && run fdt_fixup && " \
161                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
162         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
163                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
164
165 #define MEM_LAYOUT_ENV_SETTINGS \
166         "bootm_size=0x10000000\0" \
167         "fdt_addr_r=0x12000000\0" \
168         "fdt_high=0xffffffff\0" \
169         "initrd_high=0xffffffff\0" \
170         "kernel_addr_r=0x11000000\0" \
171         "ramdisk_addr_r=0x12100000\0"
172
173 #define NFS_BOOTCMD \
174         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
175         "nfsboot=run setup; " \
176                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
177                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
178                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
179                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
180         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
181                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
182
183 #define SD_BOOTCMD                                              \
184         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
185                 "rootwait\0" \
186         "sdboot=run setup; " \
187                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
188                 "${vidargs}; echo Booting from SD card; " \
189                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
190                 "${boot_file} && run fdt_fixup && " \
191                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
192         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
193                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
194
195 #define USB_BOOTCMD \
196         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
197                 "rootwait\0" \
198         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
199                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
200                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
201                 "${boot_file} && run fdt_fixup && " \
202                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
203         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
204                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
205
206 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
207 #define CONFIG_EXTRA_ENV_SETTINGS \
208         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
209                 "run nfsboot ; echo ; echo nfsboot failed ; " \
210                 "usb start ;" \
211                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
212         "boot_file=uImage\0" \
213         "console=ttymxc0\0" \
214         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
215         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
216         EMMC_BOOTCMD \
217         "fdt_file=" FDT_FILE "\0" \
218         "fdt_fixup=;\0" \
219         MEM_LAYOUT_ENV_SETTINGS \
220         NFS_BOOTCMD \
221         SD_BOOTCMD \
222         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
223                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
224                 "flash_eth.img && source ${loadaddr}\0" \
225         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
226                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
227                 "source ${loadaddr}\0" \
228         "setup=setenv setupargs fec_mac=${ethaddr} " \
229                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
230                 "console=${console},${baudrate}n8\0 " \
231         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
232         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
233                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
234                 "source ${loadaddr}\0" \
235         "splashpos=m,m\0" \
236         "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
237                 "video=mxcfb1:off fbmem=8M\0 "
238
239 /* Miscellaneous configurable options */
240 #define CONFIG_SYS_LONGHELP
241 #define CONFIG_AUTO_COMPLETE
242 #undef CONFIG_SYS_CBSIZE
243 #define CONFIG_SYS_CBSIZE               1024
244 #undef CONFIG_SYS_MAXARGS
245 #define CONFIG_SYS_MAXARGS              48
246
247 #define CONFIG_SYS_ALT_MEMTEST
248 #define CONFIG_SYS_MEMTEST_START        0x10000000
249 #define CONFIG_SYS_MEMTEST_END          0x10010000
250 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
251
252 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
253
254 #define CONFIG_CMDLINE_EDITING
255
256 /* Physical Memory Map */
257 #define CONFIG_NR_DRAM_BANKS            1
258 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
259
260 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
261 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
262 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
263
264 #define CONFIG_SYS_INIT_SP_OFFSET \
265         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
266 #define CONFIG_SYS_INIT_SP_ADDR \
267         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
268
269 /* environment organization */
270 #define CONFIG_ENV_SIZE                 (8 * 1024)
271
272 #if defined(CONFIG_ENV_IS_IN_MMC)
273 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
274 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
275                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
276 #define CONFIG_SYS_MMC_ENV_DEV          0
277 #define CONFIG_SYS_MMC_ENV_PART         1
278 #endif
279
280 #define CONFIG_OF_SYSTEM_SETUP
281
282 #define CONFIG_CMD_TIME
283
284 #define CONFIG_SUPPORT_RAW_INITRD
285
286 #endif  /* __CONFIG_H */