include/configs/colibri_imx6.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2019 Toradex, Inc.
   4  *
   5  * Configuration settings for the Toradex Colibri iMX6
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include <linux/stringify.h>
  12
  13 #include "mx6_common.h"
  14
  15 #undef CONFIG_DISPLAY_BOARDINFO
  16
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/mach-imx/gpio.h>
  19
  20 #ifdef CONFIG_SPL
  21 #include "imx6_spl.h"
  22 #endif
  23
  24 #define CONFIG_CMDLINE_TAG
  25 #define CONFIG_SETUP_MEMORY_TAGS
  26 #define CONFIG_INITRD_TAG
  27 #define CONFIG_REVISION_TAG
  28 #define CONFIG_SERIAL_TAG
  29
  30 /* Size of malloc() pool */
  31 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  32
  33 #define CONFIG_MXC_UART_BASE            UART1_BASE
  34
  35 /* MMC Configs */
  36 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  37 #define CONFIG_SYS_FSL_USDHC_NUM        2
  38
  39 /* USB Configs */
  40 /* Host */
  41 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
  42 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  43 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  44 #define CONFIG_MXC_USB_FLAGS            0
  45 /* Client */
  46 #define CONFIG_USBD_HS
  47
  48 /* Framebuffer and LCD */
  49 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  50 #define CONFIG_VIDEO_LOGO
  51 #define CONFIG_VIDEO_BMP_LOGO
  52 #define CONFIG_IMX_HDMI
  53 #define CONFIG_IMX_VIDEO_SKIP
  54
  55 /* Command definition */
  56
  57 #undef CONFIG_IPADDR
  58 #define CONFIG_IPADDR                   192.168.10.2
  59 #define CONFIG_NETMASK                  255.255.255.0
  60 #undef CONFIG_SERVERIP
  61 #define CONFIG_SERVERIP                 192.168.10.1
  62
  63 #ifndef CONFIG_SPL_BUILD
  64 #define BOOT_TARGET_DEVICES(func) \
  65         func(MMC, mmc, 1) \
  66         func(MMC, mmc, 0) \
  67         func(USB, usb, 0) \
  68         func(DHCP, dhcp, na)
  69 #include <config_distro_bootcmd.h>
  70 #undef BOOTENV_RUN_NET_USB_START
  71 #define BOOTENV_RUN_NET_USB_START ""
  72 #else /* CONFIG_SPL_BUILD */
  73 #define BOOTENV
  74 #endif /* CONFIG_SPL_BUILD */
  75
  76 #define UBOOT_UPDATE \
  77         "uboot_hwpart=1\0" \
  78         "uboot_blk=8a\0" \
  79         "uboot_spl_blk=2\0" \
  80         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
  81                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
  82         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  83                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
  84         "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
  85                 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
  86
  87 #define MEM_LAYOUT_ENV_SETTINGS \
  88         "bootm_size=0x10000000\0" \
  89         "fdt_addr_r=0x12100000\0" \
  90         "kernel_addr_r=0x11000000\0" \
  91         "pxefile_addr_r=0x17100000\0" \
  92         "ramdisk_addr_r=0x12200000\0" \
  93         "scriptaddr=0x17000000\0"
  94
  95 #define NFS_BOOTCMD \
  96         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
  97         "nfsboot=run setup; " \
  98                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
  99                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 100                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 101                 "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
 102         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 103                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 104
 105 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 106 #define CONFIG_EXTRA_ENV_SETTINGS \
 107         BOOTENV \
 108         "bootcmd=run distro_bootcmd; " \
 109                 "usb start ; " \
 110                 "setenv stdout serial,vidconsole; " \
 111                 "setenv stdin serial,usbkbd\0" \
 112         "boot_file=zImage\0" \
 113         "console=ttymxc0\0" \
 114         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 115         "fdt_file=" FDT_FILE "\0" \
 116         "fdtfile=" FDT_FILE "\0" \
 117         "fdt_fixup=;\0" \
 118         MEM_LAYOUT_ENV_SETTINGS \
 119         NFS_BOOTCMD \
 120         UBOOT_UPDATE \
 121         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 122                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 123                 "flash_eth.img && source ${loadaddr}\0" \
 124         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 125                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 126                 "source ${loadaddr}\0" \
 127         "setup=setenv setupargs fec_mac=${ethaddr} " \
 128                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 129                 "console=${console},${baudrate}n8\0 " \
 130         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 131         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 132                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 133                 "source ${loadaddr}\0" \
 134         "splashpos=m,m\0" \
 135         "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 136         "vidargs=fbmem=8M\0"
 137
 138 /* Miscellaneous configurable options */
 139 #undef CONFIG_SYS_CBSIZE
 140 #define CONFIG_SYS_CBSIZE               1024
 141 #undef CONFIG_SYS_MAXARGS
 142 #define CONFIG_SYS_MAXARGS              48
 143
 144 /* Physical Memory Map */
 145 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 146
 147 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 148 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 149 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 150
 151 #define CONFIG_SYS_INIT_SP_OFFSET \
 152         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 153 #define CONFIG_SYS_INIT_SP_ADDR \
 154         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 155
 156 #endif  /* __CONFIG_H */