0d1a1bcf3df289cfdda25454a907b7ed0c5c7332
[platform/kernel/u-boot.git] / include / configs / colibri_imx6.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2013-2019 Toradex, Inc.
4  *
5  * Configuration settings for the Toradex Colibri iMX6
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <linux/stringify.h>
12
13 #include "mx6_common.h"
14
15 #include <asm/arch/imx-regs.h>
16 #include <asm/mach-imx/gpio.h>
17
18 #ifdef CONFIG_SPL
19 #include "imx6_spl.h"
20 #endif
21
22 #define CONFIG_MXC_UART_BASE            UART1_BASE
23
24 /* MMC Configs */
25 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
26 #define CONFIG_SYS_FSL_USDHC_NUM        2
27
28 /* USB Configs */
29 /* Host */
30 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
31 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
32 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
33 #define CONFIG_MXC_USB_FLAGS            0
34 /* Client */
35 #define CONFIG_USBD_HS
36
37 /* Framebuffer and LCD */
38 #define CONFIG_IMX_HDMI
39 #define CONFIG_IMX_VIDEO_SKIP
40
41 /* Command definition */
42
43 #undef CONFIG_IPADDR
44 #define CONFIG_IPADDR                   192.168.10.2
45 #define CONFIG_NETMASK                  255.255.255.0
46 #undef CONFIG_SERVERIP
47 #define CONFIG_SERVERIP                 192.168.10.1
48
49 #ifndef CONFIG_SPL_BUILD
50 #define BOOT_TARGET_DEVICES(func) \
51         func(MMC, mmc, 1) \
52         func(MMC, mmc, 0) \
53         func(USB, usb, 0) \
54         func(DHCP, dhcp, na)
55 #include <config_distro_bootcmd.h>
56 #undef BOOTENV_RUN_NET_USB_START
57 #define BOOTENV_RUN_NET_USB_START ""
58 #else /* CONFIG_SPL_BUILD */
59 #define BOOTENV
60 #endif /* CONFIG_SPL_BUILD */
61
62 #define UBOOT_UPDATE \
63         "uboot_hwpart=1\0" \
64         "uboot_blk=8a\0" \
65         "uboot_spl_blk=2\0" \
66         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
67                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
68         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
69                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
70         "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
71                 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
72
73 #define MEM_LAYOUT_ENV_SETTINGS \
74         "bootm_size=0x10000000\0" \
75         "fdt_addr_r=0x12100000\0" \
76         "kernel_addr_r=0x11000000\0" \
77         "pxefile_addr_r=0x17100000\0" \
78         "ramdisk_addr_r=0x12200000\0" \
79         "scriptaddr=0x17000000\0"
80
81 #define NFS_BOOTCMD \
82         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
83         "nfsboot=run setup; " \
84                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
85                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
86                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
87                 "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
88         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
89                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
90
91 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
92 #define CONFIG_EXTRA_ENV_SETTINGS \
93         BOOTENV \
94         "boot_file=zImage\0" \
95         "console=ttymxc0\0" \
96         "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
97         "fdt_file=" FDT_FILE "\0" \
98         "fdtfile=" FDT_FILE "\0" \
99         "fdt_fixup=;\0" \
100         MEM_LAYOUT_ENV_SETTINGS \
101         NFS_BOOTCMD \
102         UBOOT_UPDATE \
103         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
104                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
105                 "flash_eth.img && source ${loadaddr}\0" \
106         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
107                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
108                 "source ${loadaddr}\0" \
109         "setup=setenv setupargs fec_mac=${ethaddr} " \
110                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
111                 "console=${console},${baudrate}n8\0 " \
112         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
113         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
114                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
115                 "source ${loadaddr}\0" \
116         "splashpos=m,m\0" \
117         "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
118         "vidargs=fbmem=8M\0"
119
120 /* Miscellaneous configurable options */
121 #undef CONFIG_SYS_CBSIZE
122 #define CONFIG_SYS_CBSIZE               1024
123 #undef CONFIG_SYS_MAXARGS
124 #define CONFIG_SYS_MAXARGS              48
125
126 /* Physical Memory Map */
127 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
128
129 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
130 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
131 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
132
133 #define CONFIG_SYS_INIT_SP_OFFSET \
134         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
135 #define CONFIG_SYS_INIT_SP_ADDR \
136         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
137
138 #endif  /* __CONFIG_H */