include/configs/colibri-imx8x.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2019 Toradex
   4  */
   5
   6 #ifndef __COLIBRI_IMX8X_H
   7 #define __COLIBRI_IMX8X_H
   8
   9 #include <asm/arch/imx-regs.h>
  10 #include <linux/sizes.h>
  11
  12 #define CONFIG_REMAKE_ELF
  13
  14 #define CONFIG_DISPLAY_BOARDINFO_LATE
  15
  16 #undef CONFIG_BOOTM_NETBSD
  17
  18 #define CONFIG_FSL_USDHC
  19 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  20 #define USDHC1_BASE_ADDR                0x5b010000
  21 #define USDHC2_BASE_ADDR                0x5b020000
  22 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  23
  24 #define CONFIG_ENV_OVERWRITE
  25
  26 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  27
  28 /* Networking */
  29 #define FEC_QUIRK_ENET_MAC
  30
  31 #define CONFIG_TFTP_TSIZE
  32
  33 #define CONFIG_IPADDR                   192.168.10.2
  34 #define CONFIG_NETMASK                  255.255.255.0
  35 #define CONFIG_SERVERIP                 192.168.10.1
  36
  37 #define MEM_LAYOUT_ENV_SETTINGS \
  38         "fdt_addr_r=0x83000000\0" \
  39         "kernel_addr_r=0x81000000\0" \
  40         "ramdisk_addr_r=0x83800000\0" \
  41         "scriptaddr=0x80800000\0"
  42
  43 #ifdef CONFIG_AHAB_BOOT
  44 #define AHAB_ENV "sec_boot=yes\0"
  45 #else
  46 #define AHAB_ENV "sec_boot=no\0"
  47 #endif
  48
  49 /* Boot M4 */
  50 #define M4_BOOT_ENV \
  51         "m4_0_image=m4_0.bin\0" \
  52         "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
  53                 "${m4_0_image}\0" \
  54         "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
  55
  56 #define MFG_NAND_PARTITION ""
  57
  58 #define BOOT_TARGET_DEVICES(func) \
  59         func(MMC, mmc, 1) \
  60         func(MMC, mmc, 0) \
  61         func(DHCP, dhcp, na)
  62 #include <config_distro_bootcmd.h>
  63 #undef BOOTENV_RUN_NET_USB_START
  64 #define BOOTENV_RUN_NET_USB_START ""
  65
  66 #define CONFIG_MFG_ENV_SETTINGS \
  67         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  68                 "rdinit=/linuxrc g_mass_storage.stall=0 " \
  69                 "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
  70                 "g_mass_storage.idProduct=0x37FF " \
  71                 "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
  72                 "${vidargs} clk_ignore_unused\0" \
  73         "initrd_addr=0x83800000\0" \
  74         "initrd_high=0xffffffff\0" \
  75         "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
  76                 "${fdt_addr};\0" \
  77
  78 /* Initial environment variables */
  79 #define CONFIG_EXTRA_ENV_SETTINGS \
  80         AHAB_ENV \
  81         BOOTENV \
  82         CONFIG_MFG_ENV_SETTINGS \
  83         M4_BOOT_ENV \
  84         MEM_LAYOUT_ENV_SETTINGS \
  85         "console=ttyLP3 earlycon\0" \
  86         "fdt_addr=0x83000000\0" \
  87         "fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
  88         "fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
  89         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  90         "image=Image\0" \
  91         "initrd_addr=0x83800000\0" \
  92         "initrd_high=0xffffffffffffffff\0" \
  93         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  94                 "root=PARTUUID=${uuid} rootwait " \
  95         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  96         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  97         "netargs=setenv bootargs console=${console},${baudrate} " \
  98                 "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
  99                 "${vidargs}\0" \
 100         "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
 101                 "colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \
 102                 "${fdt_addr}\0" \
 103         "panel=NULL\0" \
 104         "script=boot.scr\0" \
 105         "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
 106                 "if test \"$confirm\" = \"y\"; then " \
 107                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
 108                 "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
 109                 "${blkcnt}; fi\0" \
 110         "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
 111
 112 /* Link Definitions */
 113 #define CONFIG_LOADADDR                 0x80280000
 114
 115 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 116
 117 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 118
 119 #define CONFIG_SYS_MEMTEST_START        0x88000000
 120 #define CONFIG_SYS_MEMTEST_END          0x89000000
 121
 122 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 123 #define CONFIG_ENV_SIZE                 SZ_8K
 124 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 125                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 126 #define CONFIG_SYS_MMC_ENV_DEV          0       /* USDHC1 eMMC */
 127 #define CONFIG_SYS_MMC_ENV_PART         1
 128
 129 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 130
 131 /* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
 132 #define CONFIG_SYS_FSL_USDHC_NUM        2
 133
 134 #define CONFIG_SYS_BOOTM_LEN            SZ_64M /* Increase max gunzip size */
 135
 136 /* Size of malloc() pool */
 137 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 138
 139 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 140 #define PHYS_SDRAM_1                    0x80000000
 141 #define PHYS_SDRAM_2                    0x880000000
 142 #define PHYS_SDRAM_1_SIZE               SZ_2G           /* 2 GB */
 143 #define PHYS_SDRAM_2_SIZE               0x00000000      /* 0 GB */
 144
 145 /* Serial */
 146 #define CONFIG_BAUDRATE                 115200
 147
 148 /* Monitor Command Prompt */
 149 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 150 #define CONFIG_SYS_CBSIZE               SZ_2K
 151 #define CONFIG_SYS_MAXARGS              64
 152 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 153 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 154                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 155
 156 /* Generic Timer Definitions */
 157 #define COUNTER_FREQUENCY               8000000 /* 8MHz */
 158
 159 #define BOOTAUX_RESERVED_MEM_BASE 0x88000000
 160 #define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
 161
 162 #endif /* __COLIBRI_IMX8X_H */