include/configs/colibri-imx8x.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2019 Toradex
   4  */
   5
   6 #ifndef __COLIBRI_IMX8X_H
   7 #define __COLIBRI_IMX8X_H
   8
   9 #include <asm/arch/imx-regs.h>
  10 #include <linux/sizes.h>
  11
  12 #define CONFIG_REMAKE_ELF
  13
  14 #define CONFIG_DISPLAY_BOARDINFO_LATE
  15
  16 #undef CONFIG_BOOTM_NETBSD
  17
  18 #define CONFIG_FSL_ESDHC
  19 #define CONFIG_FSL_USDHC
  20 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  21 #define USDHC1_BASE_ADDR                0x5b010000
  22 #define USDHC2_BASE_ADDR                0x5b020000
  23 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  24
  25 #define CONFIG_ENV_OVERWRITE
  26
  27 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  28
  29 /* Networking */
  30 #define FEC_QUIRK_ENET_MAC
  31
  32 #define CONFIG_TFTP_TSIZE
  33
  34 #define CONFIG_IPADDR                   192.168.10.2
  35 #define CONFIG_NETMASK                  255.255.255.0
  36 #define CONFIG_SERVERIP                 192.168.10.1
  37
  38 #define MEM_LAYOUT_ENV_SETTINGS \
  39         "fdt_addr_r=0x83000000\0" \
  40         "kernel_addr_r=0x81000000\0" \
  41         "ramdisk_addr_r=0x83800000\0" \
  42         "scriptaddr=0x80800000\0"
  43
  44 #ifdef CONFIG_AHAB_BOOT
  45 #define AHAB_ENV "sec_boot=yes\0"
  46 #else
  47 #define AHAB_ENV "sec_boot=no\0"
  48 #endif
  49
  50 /* Boot M4 */
  51 #define M4_BOOT_ENV \
  52         "m4_0_image=m4_0.bin\0" \
  53         "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
  54                 "${m4_0_image}\0" \
  55         "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
  56
  57 #define MFG_NAND_PARTITION ""
  58
  59 #define BOOT_TARGET_DEVICES(func) \
  60         func(MMC, mmc, 1) \
  61         func(MMC, mmc, 0) \
  62         func(DHCP, dhcp, na)
  63 #include <config_distro_bootcmd.h>
  64 #undef BOOTENV_RUN_NET_USB_START
  65 #define BOOTENV_RUN_NET_USB_START ""
  66
  67 #define CONFIG_MFG_ENV_SETTINGS \
  68         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  69                 "rdinit=/linuxrc g_mass_storage.stall=0 " \
  70                 "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
  71                 "g_mass_storage.idProduct=0x37FF " \
  72                 "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
  73                 "${vidargs} clk_ignore_unused\0" \
  74         "initrd_addr=0x83800000\0" \
  75         "initrd_high=0xffffffff\0" \
  76         "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
  77                 "${fdt_addr};\0" \
  78
  79 /* Initial environment variables */
  80 #define CONFIG_EXTRA_ENV_SETTINGS \
  81         AHAB_ENV \
  82         BOOTENV \
  83         CONFIG_MFG_ENV_SETTINGS \
  84         M4_BOOT_ENV \
  85         MEM_LAYOUT_ENV_SETTINGS \
  86         "console=ttyLP3 earlycon\0" \
  87         "fdt_addr=0x83000000\0" \
  88         "fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
  89         "fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
  90         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  91         "image=Image\0" \
  92         "initrd_addr=0x83800000\0" \
  93         "initrd_high=0xffffffffffffffff\0" \
  94         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  95                 "root=PARTUUID=${uuid} rootwait " \
  96         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  97         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
  98         "netargs=setenv bootargs console=${console},${baudrate} " \
  99                 "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
 100                 "${vidargs}\0" \
 101         "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
 102                 "colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \
 103                 "${fdt_addr}\0" \
 104         "panel=NULL\0" \
 105         "script=boot.scr\0" \
 106         "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
 107                 "if test \"$confirm\" = \"y\"; then " \
 108                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
 109                 "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
 110                 "${blkcnt}; fi\0" \
 111         "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
 112
 113 /* Link Definitions */
 114 #define CONFIG_LOADADDR                 0x80280000
 115
 116 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 117
 118 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 119
 120 #define CONFIG_SYS_MEMTEST_START        0x88000000
 121 #define CONFIG_SYS_MEMTEST_END          0x89000000
 122
 123 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 124 #define CONFIG_ENV_SIZE                 SZ_8K
 125 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 126                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 127 #define CONFIG_SYS_MMC_ENV_DEV          0       /* USDHC1 eMMC */
 128 #define CONFIG_SYS_MMC_ENV_PART         1
 129
 130 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
 131
 132 /* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
 133 #define CONFIG_SYS_FSL_USDHC_NUM        2
 134
 135 #define CONFIG_SYS_BOOTM_LEN            SZ_64M /* Increase max gunzip size */
 136
 137 /* Size of malloc() pool */
 138 #define CONFIG_SYS_MALLOC_LEN           ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
 139
 140 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 141 #define PHYS_SDRAM_1                    0x80000000
 142 #define PHYS_SDRAM_2                    0x880000000
 143 #define PHYS_SDRAM_1_SIZE               SZ_2G           /* 2 GB */
 144 #define PHYS_SDRAM_2_SIZE               0x00000000      /* 0 GB */
 145
 146 /* Serial */
 147 #define CONFIG_BAUDRATE                 115200
 148
 149 /* Monitor Command Prompt */
 150 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 151 #define CONFIG_SYS_CBSIZE               SZ_2K
 152 #define CONFIG_SYS_MAXARGS              64
 153 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 154 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 155                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 156
 157 /* Generic Timer Definitions */
 158 #define COUNTER_FREQUENCY               8000000 /* 8MHz */
 159
 160 #define BOOTAUX_RESERVED_MEM_BASE 0x88000000
 161 #define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
 162
 163 #endif /* __COLIBRI_IMX8X_H */