include/configs/colibri-imx6ull.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2018 Toradex AG
   4  *
   5  * Configuration settings for the Colibri iMX6ULL module.
   6  *
   7  * based on colibri_imx7.h
   8  */
   9
  10 #ifndef __COLIBRI_IMX6ULL_CONFIG_H
  11 #define __COLIBRI_IMX6ULL_CONFIG_H
  12
  13 #include "mx6_common.h"
  14 #define CONFIG_IOMUX_LPSR
  15
  16 /* #define CONFIG_DBG_MONITOR*/
  17 #define PHYS_SDRAM_SIZE                 SZ_512M
  18
  19 /* Size of malloc() pool */
  20 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  21
  22 /* Network */
  23 #define CONFIG_MII
  24 #define CONFIG_FEC_XCV_TYPE             RMII
  25 #define CONFIG_ETHPRIME                 "FEC"
  26 #define CONFIG_FEC_MXC_PHYADDR          0
  27
  28 #define CONFIG_IP_DEFRAG
  29 #define CONFIG_TFTP_BLOCKSIZE           16352
  30 #define CONFIG_TFTP_TSIZE
  31
  32 /* ENET1 */
  33 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
  34
  35 /* MMC Config*/
  36 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  37 #define CONFIG_SYS_FSL_USDHC_NUM        1
  38
  39 #undef CONFIG_BOOTM_PLAN9
  40 #undef CONFIG_BOOTM_RTEMS
  41
  42 /* I2C configs */
  43 #define CONFIG_SYS_I2C_SPEED            100000
  44
  45 #define CONFIG_IPADDR                   192.168.10.2
  46 #define CONFIG_NETMASK                  255.255.255.0
  47 #define CONFIG_SERVERIP                 192.168.10.1
  48
  49 #define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb"
  50
  51 #define MEM_LAYOUT_ENV_SETTINGS \
  52         "bootm_size=0x10000000\0" \
  53         "fdt_addr_r=0x82000000\0" \
  54         "fdt_high=0xffffffff\0" \
  55         "initrd_high=0xffffffff\0" \
  56         "kernel_addr_r=0x81000000\0" \
  57         "pxefile_addr_r=0x87100000\0" \
  58         "ramdisk_addr_r=0x82100000\0" \
  59         "scriptaddr=0x87000000\0"
  60
  61 #define NFS_BOOTCMD \
  62         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
  63         "nfsboot=run setup; " \
  64                 "setenv bootargs ${defargs} ${nfsargs} " \
  65                 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
  66                 "dhcp ${kernel_addr_r} && " \
  67                 "tftp ${fdt_addr_r} " FDT_FILE " && " \
  68                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  69
  70 #define SD_BOOTCMD \
  71         "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
  72         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
  73         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  74         "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
  75         "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
  76         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  77
  78 #define UBI_BOOTCMD \
  79         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
  80                 "ubi.fm_autoconvert=1\0" \
  81         "ubiboot=run setup; " \
  82                 "setenv bootargs ${defargs} ${ubiargs} " \
  83                 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
  84                 "ubi part ubi &&" \
  85                 "ubi read ${kernel_addr_r} kernel && " \
  86                 "ubi read ${fdt_addr_r} dtb && " \
  87                 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  88
  89 #define CONFIG_BOOTCOMMAND "run ubiboot; " \
  90         "setenv fdtfile " FDT_FILE " && run distro_bootcmd;"
  91
  92 #define BOOT_TARGET_DEVICES(func) \
  93         func(MMC, mmc, 0) \
  94         func(USB, usb, 0) \
  95         func(DHCP, dhcp, na)
  96 #include <config_distro_bootcmd.h>
  97
  98 #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
  99
 100 #define CONFIG_EXTRA_ENV_SETTINGS \
 101         BOOTENV \
 102         MEM_LAYOUT_ENV_SETTINGS \
 103         NFS_BOOTCMD \
 104         SD_BOOTCMD \
 105         UBI_BOOTCMD \
 106         "console=ttymxc0\0" \
 107         "defargs=user_debug=30\0" \
 108         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 109         "fdt_board=eval-v3\0" \
 110         "fdt_fixup=;\0" \
 111         "ip_dyn=yes\0" \
 112         "kernel_file=zImage\0" \
 113         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 114         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 115                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 116                 "${board}/flash_eth.img && source ${loadaddr}\0" \
 117         "setsdupdate=mmc rescan && setenv interface mmc && " \
 118                 "fatload ${interface} 0:1 ${loadaddr} " \
 119                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 120         "setup=setenv setupargs " \
 121                 "console=tty1 console=${console}" \
 122                 ",${baudrate}n8 ${memargs} consoleblank=0\0" \
 123         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 124         "setusbupdate=usb start && setenv interface usb && " \
 125                 "fatload ${interface} 0:1 ${loadaddr} " \
 126                 "${board}/flash_blk.img && source ${loadaddr}\0" \
 127         "splashpos=m,m\0" \
 128         "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
 129         "vidargs=video=mxsfb:640x480-16@60"
 130
 131 #define CONFIG_SYS_MEMTEST_START        0x80000000
 132 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x08000000)
 133
 134 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 135
 136 /* Physical Memory Map */
 137 #define CONFIG_NR_DRAM_BANKS            1
 138 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 139
 140 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 141 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 142 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 143
 144 #define CONFIG_SYS_INIT_SP_OFFSET \
 145         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 146 #define CONFIG_SYS_INIT_SP_ADDR \
 147         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 148
 149 #if defined(CONFIG_ENV_IS_IN_NAND)
 150 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 151 #define CONFIG_ENV_OFFSET               (28 * CONFIG_ENV_SECT_SIZE)
 152 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 153 #endif
 154
 155 /* NAND stuff */
 156 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 157 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
 158 #define CONFIG_SYS_NAND_BASE            -1
 159 #define CONFIG_SYS_NAND_ONFI_DETECTION
 160 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 161
 162 /* USB Configs */
 163 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 164
 165 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 166 #define CONFIG_MXC_USB_FLAGS            0
 167 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 168
 169 #define CONFIG_IMX_THERMAL
 170
 171 #define CONFIG_USBD_HS
 172
 173 /* USB Device Firmware Update support */
 174 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    SZ_16M
 175 #define DFU_DEFAULT_POLL_TIMEOUT        300
 176
 177 #ifdef CONFIG_VIDEO
 178 #define CONFIG_VIDEO_MXS
 179 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
 180 #define CONFIG_VIDEO_LOGO
 181 #define CONFIG_SPLASH_SCREEN
 182 #define CONFIG_SPLASH_SCREEN_ALIGN
 183 #define CONFIG_BMP_16BPP
 184 #define CONFIG_VIDEO_BMP_RLE8
 185 #define CONFIG_VIDEO_BMP_LOGO
 186 #endif
 187
 188 #endif