3 * Murray Jensen <Murray.Jensen@cmst.csiro.au>
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * Config header file for Cogent platform using an MPC8xx CPU module
32 * High Level Configuration Options
36 #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
37 #define CONFIG_COGENT 1 /* using Cogent Modular Architecture */
38 #define CONFIG_CPM2 1 /* Has a CPM2 */
40 #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
42 /* Cogent Modular Architecture options */
43 #define CONFIG_CMA282 1 /* ...on a CMA282 CPU module */
44 #define CONFIG_CMA111 1 /* ...on a CMA111 motherboard */
47 * select serial console configuration
49 * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
50 * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
53 * if CONFIG_CONS_NONE is defined, then the serial console routines must
54 * defined elsewhere (for example, on the cogent platform, there are serial
55 * ports on the motherboard which are used for the serial console - see
56 * cogent/cma101/serial.[ch]).
58 #define CONFIG_CONS_ON_SMC /* define if console on SMC */
59 #undef CONFIG_CONS_ON_SCC /* define if console on SCC */
60 #undef CONFIG_CONS_NONE /* define if console on something else*/
61 #define CONFIG_CONS_INDEX 1 /* which serial channel for console */
62 #undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
63 #define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
64 #define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
67 * select ethernet configuration
69 * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
70 * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
73 * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
74 * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
76 #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
77 #undef CONFIG_ETHER_ON_FCC /* define if ether on FCC */
78 #define CONFIG_ETHER_NONE /* define if ether on something else */
79 #define CONFIG_ETHER_INDEX 1 /* which channel for ether */
81 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
82 #define CONFIG_8260_CLKIN 66666666 /* in Hz */
84 #if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
85 #define CONFIG_BAUDRATE 230400
87 #define CONFIG_BAUDRATE 9600
92 * Command line configuration.
94 #include <config_cmd_default.h>
96 #define CONFIG_CMD_KGDB
102 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */
104 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
106 #define CONFIG_BOOTCOMMAND "bootm 04080000 04200000" /* autoboot command*/
108 #define CONFIG_BOOTARGS "root=/dev/ram rw"
110 #if defined(CONFIG_CMD_KGDB)
111 #define CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
112 #undef CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
113 #undef CONFIG_KGDB_NONE /* define if kgdb on something else */
114 #define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
115 #define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
116 #define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */
117 #define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
118 # if defined(CONFIG_KGDB_NONE) || defined(CONFIG_KGDB_USE_EXTC)
119 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port at */
121 #define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
125 #undef CONFIG_WATCHDOG /* disable platform specific watchdog */
128 * Miscellaneous configurable options
130 #define CFG_LONGHELP /* undef to save memory */
131 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
132 #if defined(CONFIG_CMD_KGDB)
133 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
135 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
137 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
138 #define CFG_MAXARGS 16 /* max number of command args */
139 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
141 #define CFG_MEMTEST_START 0x00400000 /* memtest works on */
142 #define CFG_MEMTEST_END 0x01c00000 /* 4 ... 28 MB in DRAM */
144 #define CFG_LOAD_ADDR 0x100000 /* default load address */
146 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
148 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
151 * Low Level Configuration Settings
152 * (address mappings, register initial values, etc.)
153 * You should know what you are doing if you make changes here.
156 /*-----------------------------------------------------------------------
157 * Low Level Cogent settings
158 * if CFG_CMA_CONS_SERIAL is defined, make sure the 8260 CPM serial is not.
159 * also, make sure CONFIG_CONS_INDEX is still defined - the index will be
160 * 1 for serialA, 2 for serialB, 3 for ser2A, 4 for ser2B
161 * (second 2 for CMA120 only)
163 #define CFG_CMA_MB_BASE 0x00000000 /* base of m/b address space */
165 #include <configs/cogent_common.h>
167 #ifdef CONFIG_CONS_NONE
168 #define CFG_CMA_CONS_SERIAL /* use Cogent motherboard serial for console */
170 #define CFG_CMA_LCD_HEARTBEAT /* define for sec rotator in lcd corner */
171 #define CONFIG_SHOW_ACTIVITY
173 #if (CMA_MB_CAPS & CMA_MB_CAP_FLASH)
175 * flash exists on the motherboard
176 * set these four according to TOP dipsw:
177 * TOP on => ..._FLLOW_... (boot EPROM space is high so FLASH is low )
178 * TOP off => ..._FLHIGH_... (boot EPROM space is low so FLASH is high)
180 #define CMA_MB_FLASH_EXEC_BASE CMA_MB_FLLOW_EXEC_BASE
181 #define CMA_MB_FLASH_EXEC_SIZE CMA_MB_FLLOW_EXEC_SIZE
182 #define CMA_MB_FLASH_RDWR_BASE CMA_MB_FLLOW_RDWR_BASE
183 #define CMA_MB_FLASH_RDWR_SIZE CMA_MB_FLLOW_RDWR_SIZE
185 #define CMA_MB_FLASH_BASE CMA_MB_FLASH_EXEC_BASE
186 #define CMA_MB_FLASH_SIZE CMA_MB_FLASH_EXEC_SIZE
188 /*-----------------------------------------------------------------------
189 * Hard Reset Configuration Words
191 * if you change bits in the HRCW, you must also change the CFG_*
192 * defines for the various registers affected by the HRCW e.g. changing
193 * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
195 #define CFG_HRCW_MASTER (HRCW_EBM|HRCW_BPS10|HRCW_L2CPC10|HRCW_DPPC11|\
196 HRCW_ISB100|HRCW_MMR11|HRCW_MODCK_H0101)
197 /* no slaves so just duplicate the master hrcw */
198 #define CFG_HRCW_SLAVE1 CFG_HRCW_MASTER
199 #define CFG_HRCW_SLAVE2 CFG_HRCW_MASTER
200 #define CFG_HRCW_SLAVE3 CFG_HRCW_MASTER
201 #define CFG_HRCW_SLAVE4 CFG_HRCW_MASTER
202 #define CFG_HRCW_SLAVE5 CFG_HRCW_MASTER
203 #define CFG_HRCW_SLAVE6 CFG_HRCW_MASTER
204 #define CFG_HRCW_SLAVE7 CFG_HRCW_MASTER
206 /*-----------------------------------------------------------------------
207 * Internal Memory Mapped Register
209 #define CFG_IMMR 0xF0000000
211 /*-----------------------------------------------------------------------
212 * Definitions for initial stack pointer and data area (in DPRAM)
214 #define CFG_INIT_RAM_ADDR CFG_IMMR
215 #define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
216 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
217 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
218 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
220 /*-----------------------------------------------------------------------
221 * Start addresses for the final memory configuration
222 * (Set up by the startup code)
223 * Please note that CFG_SDRAM_BASE _must_ start at 0
225 #define CFG_SDRAM_BASE CMA_MB_RAM_BASE
227 #define CFG_FLASH_BASE CMA_MB_SLOT2_BASE /* cma302 in slot 2 */
229 #define CFG_FLASH_BASE CMA_MB_FLASH_BASE /* flash on m/b */
231 #define CFG_MONITOR_BASE TEXT_BASE
232 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
233 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
236 * For booting Linux, the board info and command line data
237 * have to be in the first 8 MB of memory, since this is
238 * the maximum mapped by the Linux kernel during initialization.
240 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
242 /*-----------------------------------------------------------------------
245 #define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */
246 #define CFG_MAX_FLASH_SECT 67 /* max num of sects on one chip */
248 #define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
249 #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
251 #define CFG_ENV_IS_IN_FLASH 1
252 #define CFG_ENV_ADDR CFG_FLASH_BASE /* Addr of Environment Sector */
254 #define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
255 #define CFG_ENV_SECT_SIZE (512*1024) /* see README - env sect real size */
257 #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
260 /*-----------------------------------------------------------------------
261 * Cache Configuration
263 #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
264 #if defined(CONFIG_CMD_KGDB)
265 # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
268 /*-----------------------------------------------------------------------
269 * HIDx - Hardware Implementation-dependent Registers 2-11
270 *-----------------------------------------------------------------------
271 * HID0 also contains cache control - initially enable both caches and
272 * invalidate contents, then the final state leaves only the instruction
273 * cache enabled. Note that Power-On and Hard reset invalidate the caches,
274 * but Soft reset does not.
276 * HID1 has only read-only information - nothing to set.
278 #define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
280 #define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
283 /*-----------------------------------------------------------------------
284 * RMR - Reset Mode Register 5-5
285 *-----------------------------------------------------------------------
286 * turn on Checkstop Reset Enable
288 #define CFG_RMR RMR_CSRE
290 /*-----------------------------------------------------------------------
291 * BCR - Bus Configuration 4-25
292 *-----------------------------------------------------------------------
294 #define CFG_BCR BCR_EBM
296 /*-----------------------------------------------------------------------
297 * SIUMCR - SIU Module Configuration 4-31
298 *-----------------------------------------------------------------------
300 #define CFG_SIUMCR (SIUMCR_DPPC11|SIUMCR_L2CPC10|SIUMCR_MMR11)
302 /*-----------------------------------------------------------------------
303 * SYPCR - System Protection Control 4-35
304 * SYPCR can only be written once after reset!
305 *-----------------------------------------------------------------------
306 * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
308 #if defined(CONFIG_WATCHDOG)
309 #define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
310 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
312 #define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
313 SYPCR_SWRI|SYPCR_SWP)
314 #endif /* CONFIG_WATCHDOG */
316 /*-----------------------------------------------------------------------
317 * TMCNTSC - Time Counter Status and Control 4-40
318 *-----------------------------------------------------------------------
319 * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
320 * and enable Time Counter
322 #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
324 /*-----------------------------------------------------------------------
325 * PISCR - Periodic Interrupt Status and Control 4-42
326 *-----------------------------------------------------------------------
327 * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
330 #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
332 /*-----------------------------------------------------------------------
333 * SCCR - System Clock Control 9-8
334 *-----------------------------------------------------------------------
335 * Ensure DFBRG is Divide by 16
337 #define CFG_SCCR (SCCR_DFBRG01)
339 /*-----------------------------------------------------------------------
340 * RCCR - RISC Controller Configuration 13-7
341 *-----------------------------------------------------------------------
345 #if defined(CONFIG_CMA282)
348 * Init Memory Controller:
350 * According to the Cogent manual, only CS0 and CS2 are used - CS0 for EPROM
351 * and CS2 for (optional) local bus RAM on the CPU module.
353 * Note the motherboard address space (256 Mbyte in size) is connected
354 * to the 60x Bus and is located starting at address 0. The Hard Reset
355 * Configuration Word should put the 60x Bus into External Bus Mode, since
356 * we dont set up any memory controller maps for it (see BCR[EBM], 4-26).
358 * (the *_SIZE vars must be a power of 2)
361 #define CFG_CMA_CS0_BASE TEXT_BASE /* EPROM */
362 #define CFG_CMA_CS0_SIZE (1 << 20)
364 #define CFG_CMA_CS2_BASE 0x10000000 /* Local Bus SDRAM */
365 #define CFG_CMA_CS2_SIZE (16 << 20)
369 * CS0 maps the EPROM on the cpu module
370 * Set it for 10 wait states, address CFG_MONITOR_BASE and size 1M
372 * Note: We must have already transferred control to the final location
373 * of the EPROM before these are used, because when BR0/OR0 are set, the
374 * mirror of the eprom at any other addresses will disappear.
377 /* base address = CFG_CMA_CS0_BASE, 16-bit, no parity, r/o, gpcm (60x bus) */
378 #define CFG_BR0_PRELIM ((CFG_CMA_CS0_BASE&BRx_BA_MSK)|BRx_PS_16|BRx_WP|BRx_V)
379 /* mask size CFG_CMA_CS0_SIZE, csneg 1/4 early, adr-to-cs 1/2, 10-wait states */
380 #define CFG_OR0_PRELIM (P2SZ_TO_AM(CFG_CMA_CS0_SIZE)|\
381 ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
384 * CS2 enables the Local Bus SDRAM on the CPU Module
386 * Will leave this unset for the moment, because a) my CPU module has no
387 * SDRAM installed (it is optional); and b) it will require programming
388 * one of the UPMs in SDRAM mode - not a trivial job, and hard to get right
389 * if you can't test it.
393 /* base address = CFG_CMA_CS2_BASE, 32-bit, no parity, ??? */
394 #define CFG_BR0_PRELIM ((CFG_CMA_CS2_BASE&BRx_BA_MSK)|BRx_PS_32|/*???*/|BRx_V)
395 /* mask size CFG_CMA_CS2_SIZE, CS time normal, ??? */
396 #define CFG_OR2_PRELIM ((~(CFG_CMA_CS2_SIZE-1)&ORx_AM_MSK)|/*???*/)
402 * Internal Definitions
406 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH*/
407 #define BOOTFLAG_WARM 0x02 /* Software reboot */
409 #endif /* __CONFIG_H */