include/configs/cm_t43.h

   1 /*
   2  * cm_t43.h
   3  *
   4  * Copyright (C) 2015 Compulab, Ltd.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_CM_T43_H
  10 #define __CONFIG_CM_T43_H
  11
  12 #define CONFIG_CM_T43
  13 #define CONFIG_ARCH_CPU_INIT
  14 #define CONFIG_MAX_RAM_BANK_SIZE        (2048 << 20)    /* 2GB */
  15 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  16
  17 #include <asm/arch/omap.h>
  18
  19 /* Serial support */
  20 #define CONFIG_SYS_NS16550_SERIAL
  21 #define CONFIG_SYS_NS16550_CLK          48000000
  22 #define CONFIG_SYS_NS16550_COM1         0x44e09000
  23 #if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
  24 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  25 #endif
  26
  27 /* NAND support */
  28 #define CONFIG_NAND_OMAP_ELM
  29 #define CONFIG_SYS_NAND_ONFI_DETECTION
  30 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  31 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  32 #define CONFIG_SYS_NAND_OOBSIZE         64
  33 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
  34 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  35 #define CONFIG_SYS_NAND_ECCSIZE         512
  36 #define CONFIG_SYS_NAND_ECCBYTES        14
  37 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
  38 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
  39                                          CONFIG_SYS_NAND_PAGE_SIZE)
  40 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
  41                                          10, 11, 12, 13, 14, 15, 16, 17, \
  42                                          18, 19, 20, 21, 22, 23, 24, 25, \
  43                                          26, 27, 28, 29, 30, 31, 32, 33, \
  44                                          34, 35, 36, 37, 38, 39, 40, 41, \
  45                                          42, 43, 44, 45, 46, 47, 48, 49, \
  46                                          50, 51, 52, 53, 54, 55, 56, 57, }
  47
  48 /* CPSW Ethernet support */
  49 #define CONFIG_DRIVER_TI_CPSW
  50 #define CONFIG_MII
  51 #define CONFIG_BOOTP_DEFAULT
  52 #define CONFIG_BOOTP_SEND_HOSTNAME
  53 #define CONFIG_BOOTP_GATEWAY
  54 #define CONFIG_NET_MULTI
  55 #define CONFIG_PHY_ATHEROS
  56 #define CONFIG_SYS_RX_ETH_BUFFER        64
  57
  58 /* USB support */
  59 #define CONFIG_USB_XHCI_OMAP
  60 #define CONFIG_OMAP_USB_PHY
  61 #define CONFIG_AM437X_USB2PHY2_HOST
  62
  63 /* SPI Flash support */
  64 #define CONFIG_TI_SPI_MMAP
  65 #define CONFIG_SF_DEFAULT_SPEED         48000000
  66 #define CONFIG_DEFAULT_SPI_MODE         SPI_MODE_3
  67
  68 /* Power */
  69 #define CONFIG_POWER
  70 #define CONFIG_POWER_I2C
  71 #define CONFIG_POWER_TPS65218
  72
  73 /* Enabling L2 Cache */
  74 #define CONFIG_SYS_L2_PL310
  75 #define CONFIG_SYS_PL310_BASE           0x48242000
  76
  77 /*
  78  * Since SPL did pll and ddr initialization for us,
  79  * we don't need to do it twice.
  80  */
  81 #if !defined(CONFIG_SPL_BUILD)
  82 #define CONFIG_SKIP_LOWLEVEL_INIT
  83 #endif
  84
  85 #define CONFIG_HSMMC2_8BIT
  86
  87 #include <configs/ti_armv7_omap.h>
  88 #undef CONFIG_SYS_MONITOR_LEN
  89
  90 #define CONFIG_ENV_SIZE                 (16 * 1024)
  91 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  92
  93 #define V_OSCK                          24000000  /* Clock output from T2 */
  94 #define V_SCLK                          (V_OSCK)
  95
  96 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
  97 #define CONFIG_ENV_OFFSET               (768 * 1024)
  98 #define CONFIG_ENV_SPI_MAX_HZ           48000000
  99
 100 #define CONFIG_EXTRA_ENV_SETTINGS \
 101         "loadaddr=0x80200000\0" \
 102         "fdtaddr=0x81200000\0" \
 103         "bootm_size=0x8000000\0" \
 104         "autoload=no\0" \
 105         "console=ttyO0,115200n8\0" \
 106         "fdtfile=am437x-sb-som-t43.dtb\0" \
 107         "kernel=zImage-cm-t43\0" \
 108         "bootscr=bootscr.img\0" \
 109         "emmcroot=/dev/mmcblk0p2 rw\0" \
 110         "emmcrootfstype=ext4 rootwait\0" \
 111         "emmcargs=setenv bootargs console=${console} " \
 112                 "root=${emmcroot} " \
 113                 "rootfstype=${emmcrootfstype}\0" \
 114         "loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
 115         "bootscript=echo Running bootscript from mmc ...; " \
 116                 "source ${loadaddr}\0" \
 117         "emmcboot=echo Booting from emmc ... && " \
 118                 "run emmcargs && " \
 119                 "load mmc 1 ${loadaddr} ${kernel} && " \
 120                 "load mmc 1 ${fdtaddr} ${fdtfile} && " \
 121                 "bootz ${loadaddr} - ${fdtaddr}\0"
 122
 123 #define CONFIG_BOOTCOMMAND \
 124         "mmc dev 0; " \
 125         "if mmc rescan; then " \
 126                 "if run loadbootscript; then " \
 127                         "run bootscript; " \
 128                 "fi; " \
 129         "fi; " \
 130         "mmc dev 1; " \
 131         "if mmc rescan; then " \
 132                 "run emmcboot; " \
 133         "fi;"
 134
 135 #define CONFIG_CONS_INDEX               1
 136
 137 /* SPL defines. */
 138 #define CONFIG_SPL_TEXT_BASE            0x40300350
 139 #define CONFIG_SYS_SPL_ARGS_ADDR        (CONFIG_SYS_SDRAM_BASE + (128 << 20))
 140 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (256 * 1024)
 141 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 142 #define CONFIG_SPL_SPI_LOAD
 143
 144 /* EEPROM */
 145 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 146 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 147 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
 148 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 149 #define CONFIG_SYS_EEPROM_SIZE                  256
 150
 151 #endif  /* __CONFIG_CM_T43_H */