1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Config file for Compulab CM-FX6 board
5 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
7 * Author: Nikita Kiryanov <nikita@compulab.co.il>
10 #ifndef __CONFIG_CM_FX6_H
11 #define __CONFIG_CM_FX6_H
13 #include "mx6_common.h"
16 #define CONFIG_SYS_LITTLE_ENDIAN
17 #define CONFIG_MACH_TYPE 4273
20 #define CONFIG_SYS_FSL_USDHC_NUM 3
21 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
24 #define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
25 #define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR
26 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
27 #define CONFIG_SYS_MEMTEST_START 0x10000000
28 #define CONFIG_SYS_MEMTEST_END 0x10010000
29 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
30 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
31 #define CONFIG_SYS_INIT_SP_OFFSET \
32 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
33 #define CONFIG_SYS_INIT_SP_ADDR \
34 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
37 #define CONFIG_MXC_UART
38 #define CONFIG_MXC_UART_BASE UART4_BASE
39 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
43 #ifndef CONFIG_SPL_BUILD
44 #define CONFIG_EXTRA_ENV_SETTINGS \
45 "fdt_high=0xffffffff\0" \
46 "initrd_high=0xffffffff\0" \
47 "fdt_addr_r=0x18000000\0" \
48 "ramdisk_addr_r=0x13000000\0" \
49 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
50 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
51 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
52 "fdtfile=undefined\0" \
53 "stdin=serial,usbkbd\0" \
54 "stdout=serial,vga\0" \
55 "stderr=serial,vga\0" \
58 "uImage=uImage-cm-fx6\0" \
59 "zImage=zImage-cm-fx6\0" \
60 "kernel=uImage-cm-fx6\0" \
62 "console=ttymxc3,115200\0" \
64 "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
65 "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
66 "doboot=bootm ${kernel_addr_r}\0" \
68 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
69 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
70 "setboottypez=setenv kernel ${zImage};" \
71 "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \
72 "setenv doloadfdt true;\0" \
73 "setboottypem=setenv kernel ${uImage};" \
74 "setenv doboot bootm ${kernel_addr_r};" \
75 "setenv doloadfdt false;\0"\
76 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
77 "sataroot=/dev/sda2 rw rootwait\0" \
78 "nandroot=/dev/mtdblock4 rw\0" \
79 "nandrootfstype=ubifs\0" \
80 "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
81 "${video} ${extrabootargs}\0" \
82 "sataargs=setenv bootargs console=${console} root=${sataroot} " \
83 "${video} ${extrabootargs}\0" \
84 "nandargs=setenv bootargs console=${console} " \
86 "rootfstype=${nandrootfstype} " \
87 "${video} ${extrabootargs}\0" \
88 "nandboot=if run nandloadkernel; then " \
91 "run storagebootcmd;" \
93 "run storagebootcmd;" \
95 "run_eboot=echo Starting EBOOT ...; "\
97 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
98 "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
99 "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
100 "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
101 "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
102 "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
103 "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
104 "setupnandboot=setenv storagetype nand;\0" \
105 "storagebootcmd=echo Booting from ${storagetype} ...;" \
106 "run ${storagetype}args; run doboot;\0" \
107 "trybootk=if run loadkernel; then " \
108 "if ${doloadfdt}; then " \
111 "run storagebootcmd;" \
114 "run setboottypem;" \
116 "run setboottypez;" \
119 "run setupmmcboot;" \
120 "mmc dev ${storagedev};" \
121 "if mmc rescan; then " \
124 "run setupsataboot;" \
125 "if sata init; then " \
128 "run setupnandboot;" \
131 "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
132 "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \
133 "if test $fdtfile = undefined; then " \
134 "echo WARNING: Could not determine dtb to use; fi; \0" \
137 #define BOOT_TARGET_DEVICES(func) \
142 #include <config_distro_bootcmd.h>
144 #define CONFIG_EXTRA_ENV_SETTINGS
148 #ifndef CONFIG_SPL_BUILD
149 #define CONFIG_SYS_NAND_BASE 0x40000000
150 #define CONFIG_SYS_NAND_MAX_CHIPS 1
151 #define CONFIG_SYS_MAX_NAND_DEVICE 1
152 #define CONFIG_SYS_NAND_ONFI_DETECTION
153 /* APBH DMA is required for NAND support */
156 /* SPI Flash Configs */
157 #if defined(CONFIG_SPL_BUILD)
159 #undef CONFIG_DM_SPI_FLASH
160 #undef CONFIG_SPI_FLASH_MTD
164 #define CONFIG_FEC_MXC
165 #define CONFIG_FEC_MXC_PHYADDR 0
166 #define CONFIG_FEC_XCV_TYPE RGMII
167 #define IMX_FEC_BASE ENET_BASE_ADDR
168 #define CONFIG_ETHPRIME "FEC0"
169 #define CONFIG_ARP_TIMEOUT 200UL
170 #define CONFIG_NET_RETRY_COUNT 5
173 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
174 #define CONFIG_MXC_USB_FLAGS 0
175 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
176 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
179 #define CONFIG_SYS_I2C
180 #define CONFIG_SYS_I2C_MXC
181 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
182 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
183 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
184 #define CONFIG_SYS_I2C_SPEED 100000
185 #define CONFIG_SYS_MXC_I2C3_SPEED 400000
187 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
188 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
189 #define CONFIG_SYS_I2C_EEPROM_BUS 2
192 #define CONFIG_SYS_SATA_MAX_DEVICE 1
194 #define CONFIG_DWC_AHSATA_PORT_ID 0
195 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
198 #define CONFIG_SYS_BOOTMAPSZ (8 << 20)
199 #define CONFIG_SERIAL_TAG
202 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
205 #include "imx6_spl.h"
208 #define CONFIG_IMX_HDMI
210 #define CONFIG_SPLASH_SCREEN
211 #define CONFIG_SPLASH_SOURCE
212 #define CONFIG_VIDEO_BMP_RLE8
214 #define CONFIG_VIDEO_LOGO
215 #define CONFIG_VIDEO_BMP_LOGO
218 #define CONFIG_ENV_EEPROM_IS_ON_I2C
219 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
220 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
221 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
222 #define CONFIG_SYS_EEPROM_SIZE 256
224 #endif /* __CONFIG_CM_FX6_H */