1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Config file for Compulab CM-FX6 board
5 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
7 * Author: Nikita Kiryanov <nikita@compulab.co.il>
10 #ifndef __CONFIG_CM_FX6_H
11 #define __CONFIG_CM_FX6_H
13 #include "mx6_common.h"
16 #define CONFIG_SYS_LITTLE_ENDIAN
19 #define CONFIG_SYS_FSL_USDHC_NUM 3
20 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
23 #define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
24 #define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR
25 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
26 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
27 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
28 #define CONFIG_SYS_INIT_SP_OFFSET \
29 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
30 #define CONFIG_SYS_INIT_SP_ADDR \
31 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
34 #define CONFIG_MXC_UART_BASE UART4_BASE
38 #ifndef CONFIG_SPL_BUILD
39 #define CONFIG_EXTRA_ENV_SETTINGS \
40 "fdt_high=0xffffffff\0" \
41 "initrd_high=0xffffffff\0" \
42 "fdt_addr_r=0x18000000\0" \
43 "ramdisk_addr_r=0x13000000\0" \
44 "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
45 "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
46 "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
47 "fdtfile=undefined\0" \
48 "stdin=serial,usbkbd\0" \
49 "stdout=serial,vidconsole\0" \
50 "stderr=serial,vidconsole\0" \
53 "uImage=uImage-cm-fx6\0" \
54 "zImage=zImage-cm-fx6\0" \
55 "kernel=uImage-cm-fx6\0" \
57 "console=ttymxc3,115200\0" \
59 "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
60 "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
61 "doboot=bootm ${kernel_addr_r}\0" \
63 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
64 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
65 "setboottypez=setenv kernel ${zImage};" \
66 "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \
67 "setenv doloadfdt true;\0" \
68 "setboottypem=setenv kernel ${uImage};" \
69 "setenv doboot bootm ${kernel_addr_r};" \
70 "setenv doloadfdt false;\0"\
71 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
72 "sataroot=/dev/sda2 rw rootwait\0" \
73 "nandroot=/dev/mtdblock4 rw\0" \
74 "nandrootfstype=ubifs\0" \
75 "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
76 "${video} ${extrabootargs}\0" \
77 "sataargs=setenv bootargs console=${console} root=${sataroot} " \
78 "${video} ${extrabootargs}\0" \
79 "nandargs=setenv bootargs console=${console} " \
81 "rootfstype=${nandrootfstype} " \
82 "${video} ${extrabootargs}\0" \
83 "nandboot=if run nandloadkernel; then " \
86 "run storagebootcmd;" \
88 "run storagebootcmd;" \
90 "run_eboot=echo Starting EBOOT ...; "\
92 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
93 "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
94 "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
95 "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
96 "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
97 "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
98 "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
99 "setupnandboot=setenv storagetype nand;\0" \
100 "storagebootcmd=echo Booting from ${storagetype} ...;" \
101 "run ${storagetype}args; run doboot;\0" \
102 "trybootk=if run loadkernel; then " \
103 "if ${doloadfdt}; then " \
106 "run storagebootcmd;" \
109 "run setboottypem;" \
111 "run setboottypez;" \
114 "run setupmmcboot;" \
115 "mmc dev ${storagedev};" \
116 "if mmc rescan; then " \
119 "run setupsataboot;" \
120 "if sata init; then " \
123 "run setupnandboot;" \
126 "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
127 "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \
128 "if test $fdtfile = undefined; then " \
129 "echo WARNING: Could not determine dtb to use; fi; \0" \
132 #define BOOT_TARGET_DEVICES(func) \
137 #include <config_distro_bootcmd.h>
139 #define CONFIG_EXTRA_ENV_SETTINGS
143 #ifndef CONFIG_SPL_BUILD
144 #define CONFIG_SYS_NAND_BASE 0x40000000
145 #define CONFIG_SYS_MAX_NAND_DEVICE 1
146 /* APBH DMA is required for NAND support */
150 #define CONFIG_FEC_MXC
151 #define CONFIG_FEC_MXC_PHYADDR 0
152 #define CONFIG_FEC_XCV_TYPE RGMII
153 #define IMX_FEC_BASE ENET_BASE_ADDR
154 #define CONFIG_ETHPRIME "FEC0"
155 #define CONFIG_ARP_TIMEOUT 200UL
156 #define CONFIG_NET_RETRY_COUNT 5
159 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
160 #define CONFIG_MXC_USB_FLAGS 0
161 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
162 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
165 #define CONFIG_SYS_SATA_MAX_DEVICE 1
167 #define CONFIG_DWC_AHSATA_PORT_ID 0
168 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
171 #define CONFIG_SYS_BOOTMAPSZ (8 << 20)
176 #include "imx6_spl.h"
179 #define CONFIG_IMX_HDMI
181 #define CONFIG_VIDEO_LOGO
182 #define CONFIG_VIDEO_BMP_LOGO
186 #endif /* __CONFIG_CM_FX6_H */