Merge branch '2019-05-24-master-imports'
[platform/kernel/u-boot.git] / include / configs / cm_fx6.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Config file for Compulab CM-FX6 board
4  *
5  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
6  *
7  * Author: Nikita Kiryanov <nikita@compulab.co.il>
8  */
9
10 #ifndef __CONFIG_CM_FX6_H
11 #define __CONFIG_CM_FX6_H
12
13 #include "mx6_common.h"
14
15 /* Machine config */
16 #define CONFIG_SYS_LITTLE_ENDIAN
17 #define CONFIG_MACH_TYPE                4273
18
19 /* MMC */
20 #define CONFIG_SYS_FSL_USDHC_NUM        3
21 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
22
23 /* RAM */
24 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
25 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
26 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
27 #define CONFIG_SYS_MEMTEST_START        0x10000000
28 #define CONFIG_SYS_MEMTEST_END          0x10010000
29 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
30 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
31 #define CONFIG_SYS_INIT_SP_OFFSET \
32         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
33 #define CONFIG_SYS_INIT_SP_ADDR \
34         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
35
36 /* Serial console */
37 #define CONFIG_MXC_UART
38 #define CONFIG_MXC_UART_BASE            UART4_BASE
39 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
40
41 /* SPI flash */
42
43 /* MTD support */
44 #ifndef CONFIG_SPL_BUILD
45 #define CONFIG_SPI_FLASH_MTD
46 #endif
47
48 /* Environment */
49 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
50 #define CONFIG_ENV_SIZE                 (8 * 1024)
51 #define CONFIG_ENV_OFFSET               (768 * 1024)
52
53 #ifndef CONFIG_SPL_BUILD
54 #define CONFIG_EXTRA_ENV_SETTINGS \
55         "fdt_high=0xffffffff\0" \
56         "initrd_high=0xffffffff\0" \
57         "fdt_addr_r=0x18000000\0" \
58         "ramdisk_addr_r=0x13000000\0" \
59         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
60         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
61         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
62         "fdtfile=undefined\0" \
63         "stdin=serial,usbkbd\0" \
64         "stdout=serial,vga\0" \
65         "stderr=serial,vga\0" \
66         "panel=HDMI\0" \
67         "autoload=no\0" \
68         "uImage=uImage-cm-fx6\0" \
69         "zImage=zImage-cm-fx6\0" \
70         "kernel=uImage-cm-fx6\0" \
71         "dtb=cm-fx6.dtb\0" \
72         "console=ttymxc3,115200\0" \
73         "ethprime=FEC0\0" \
74         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
75         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
76         "doboot=bootm ${kernel_addr_r}\0" \
77         "doloadfdt=false\0" \
78         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
79         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
80         "setboottypez=setenv kernel ${zImage};" \
81                 "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \
82                 "setenv doloadfdt true;\0" \
83         "setboottypem=setenv kernel ${uImage};" \
84                 "setenv doboot bootm ${kernel_addr_r};" \
85                 "setenv doloadfdt false;\0"\
86         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
87         "sataroot=/dev/sda2 rw rootwait\0" \
88         "nandroot=/dev/mtdblock4 rw\0" \
89         "nandrootfstype=ubifs\0" \
90         "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
91                 "${video} ${extrabootargs}\0" \
92         "sataargs=setenv bootargs console=${console} root=${sataroot} " \
93                 "${video} ${extrabootargs}\0" \
94         "nandargs=setenv bootargs console=${console} " \
95                 "root=${nandroot} " \
96                 "rootfstype=${nandrootfstype} " \
97                 "${video} ${extrabootargs}\0" \
98         "nandboot=if run nandloadkernel; then " \
99                         "run nandloadfdt;" \
100                         "run setboottypem;" \
101                         "run storagebootcmd;" \
102                         "run setboottypez;" \
103                         "run storagebootcmd;" \
104                 "fi;\0" \
105         "run_eboot=echo Starting EBOOT ...; "\
106                 "mmc dev 2 && " \
107                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
108         "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
109         "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
110         "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
111         "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
112         "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
113         "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
114         "setupnandboot=setenv storagetype nand;\0" \
115         "storagebootcmd=echo Booting from ${storagetype} ...;" \
116                         "run ${storagetype}args; run doboot;\0" \
117         "trybootk=if run loadkernel; then " \
118                 "if ${doloadfdt}; then " \
119                         "run loadfdt;" \
120                 "fi;" \
121                 "run storagebootcmd;" \
122                 "fi;\0" \
123         "trybootsmz=" \
124                 "run setboottypem;" \
125                 "run trybootk;" \
126                 "run setboottypez;" \
127                 "run trybootk;\0" \
128         "legacy_bootcmd=" \
129                 "run setupmmcboot;" \
130                 "mmc dev ${storagedev};" \
131                 "if mmc rescan; then " \
132                         "run trybootsmz;" \
133                 "fi;" \
134                 "run setupsataboot;" \
135                 "if sata init; then " \
136                         "run trybootsmz;" \
137                 "fi;" \
138                 "run setupnandboot;" \
139                 "run nandboot;\0" \
140         "findfdt="\
141                 "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \
142                         "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \
143                 "if test $fdtfile = undefined; then " \
144                         "echo WARNING: Could not determine dtb to use; fi; \0" \
145         BOOTENV
146
147 #define CONFIG_PREBOOT          "usb start;sf probe"
148
149 #define BOOT_TARGET_DEVICES(func) \
150         func(USB, usb, 0) \
151         func(MMC, mmc, 2) \
152         func(SATA, sata, 0)
153
154 #include <config_distro_bootcmd.h>
155 #else
156 #define CONFIG_EXTRA_ENV_SETTINGS
157 #endif
158
159 /* NAND */
160 #ifndef CONFIG_SPL_BUILD
161 #define CONFIG_SYS_NAND_BASE            0x40000000
162 #define CONFIG_SYS_NAND_MAX_CHIPS       1
163 #define CONFIG_SYS_MAX_NAND_DEVICE      1
164 #define CONFIG_SYS_NAND_ONFI_DETECTION
165 /* APBH DMA is required for NAND support */
166 #endif
167
168 /* Ethernet */
169 #define CONFIG_FEC_MXC
170 #define CONFIG_FEC_MXC_PHYADDR          0
171 #define CONFIG_FEC_XCV_TYPE             RGMII
172 #define IMX_FEC_BASE                    ENET_BASE_ADDR
173 #define CONFIG_PHY_ATHEROS
174 #define CONFIG_ETHPRIME                 "FEC0"
175 #define CONFIG_ARP_TIMEOUT              200UL
176 #define CONFIG_NET_RETRY_COUNT          5
177
178 /* USB */
179 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
180 #define CONFIG_MXC_USB_FLAGS            0
181 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
182 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
183
184 /* I2C */
185 #define CONFIG_SYS_I2C
186 #define CONFIG_SYS_I2C_MXC
187 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
188 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
189 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
190 #define CONFIG_SYS_I2C_SPEED            100000
191 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
192
193 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
194 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
195 #define CONFIG_SYS_I2C_EEPROM_BUS       2
196
197 /* SATA */
198 #define CONFIG_SYS_SATA_MAX_DEVICE      1
199 #define CONFIG_LBA48
200 #define CONFIG_DWC_AHSATA_PORT_ID       0
201 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
202
203 /* Boot */
204 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
205 #define CONFIG_SERIAL_TAG
206
207 /* misc */
208 #define CONFIG_SYS_MALLOC_LEN                   (10 * 1024 * 1024)
209
210 /* SPL */
211 #include "imx6_spl.h"
212 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
213
214 /* Display */
215 #define CONFIG_IMX_HDMI
216
217 #define CONFIG_SPLASH_SCREEN
218 #define CONFIG_SPLASH_SOURCE
219 #define CONFIG_VIDEO_BMP_RLE8
220
221 #define CONFIG_VIDEO_LOGO
222 #define CONFIG_VIDEO_BMP_LOGO
223
224 /* EEPROM */
225 #define CONFIG_ENV_EEPROM_IS_ON_I2C
226 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
227 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4
228 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
229 #define CONFIG_SYS_EEPROM_SIZE                  256
230
231 #endif  /* __CONFIG_CM_FX6_H */