include/configs/chiliboard.h

   1 /*
   2  * Copyright (C) 2017 Grinn - http://grinn-global.com/
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_CHILIBOARD_H
   8 #define __CONFIG_CHILIBOARD_H
   9
  10 #include <configs/ti_am335x_common.h>
  11
  12 #define CONFIG_CONS_INDEX               1
  13
  14 #ifndef CONFIG_SPL_BUILD
  15 # define CONFIG_TIMESTAMP
  16 #endif
  17
  18 /* Clock Defines */
  19 #define V_OSCK                          24000000  /* Clock output from T2 */
  20 #define V_SCLK                          (V_OSCK)
  21
  22 #define NANDARGS \
  23         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  24         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  25         "nandargs=setenv bootargs console=${console} ${optargs} " \
  26                 "${mtdparts} " \
  27                 "root=${nandroot} " \
  28                 "rootfstype=${nandrootfstype}\0" \
  29         "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
  30         "nandrootfstype=ubifs rootwait=1\0" \
  31         "nandboot=echo Booting from nand ...; " \
  32                 "run nandargs; " \
  33                 "nand read ${fdt_addr} NAND.u-boot-spl-os; " \
  34                 "nand read ${loadaddr} NAND.kernel; " \
  35                 "bootz ${loadaddr} - ${fdt_addr}\0"
  36
  37 #define CONFIG_BOOTCOMMAND \
  38         "run mmcboot; " \
  39         "run nandboot; " \
  40         "run netboot"
  41
  42 #define CONFIG_EXTRA_ENV_SETTINGS \
  43         "loadaddr=0x82000000\0" \
  44         "fdt_addr=0x87800000\0" \
  45         "boot_fdt=try\0" \
  46         "console=ttyO0,115200n8\0" \
  47         "image=zImage\0" \
  48         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  49         "ip_dyn=yes\0" \
  50         "optargs=\0" \
  51         "loadbootscript=" \
  52                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  53         "bootscript=echo Running bootscript from mmc ...; " \
  54                 "source\0" \
  55         "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
  56                 "${boot_dir}/${image}\0" \
  57         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
  58                 "${boot_dir}/${fdt_file}\0" \
  59         "mmcdev=0\0" \
  60         "mmcpart=1\0" \
  61         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  62         "mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} " \
  63                 "${mtdparts} " \
  64                 "root=${mmcroot}\0" \
  65         "mmcloados=run mmcargs; " \
  66                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  67                         "if run loadfdt; then " \
  68                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  69                         "else " \
  70                                 "if test ${boot_fdt} = try; then " \
  71                                         "bootz; " \
  72                                 "else " \
  73                                         "echo WARN: Cannot load the DT; " \
  74                                 "fi; " \
  75                         "fi; " \
  76                 "else " \
  77                         "bootz; " \
  78                 "fi;\0" \
  79         "mmcboot=mmc dev ${mmcdev}; " \
  80                 "if mmc rescan; then " \
  81                         "echo SD/MMC found on device ${mmcdev};" \
  82                         "if run loadimage; then " \
  83                                 "run mmcloados;" \
  84                         "fi;" \
  85                 "fi;\0" \
  86         "netargs=setenv bootargs console=${console},${baudrate} ${optargs} " \
  87                 "${mtdparts} " \
  88                 "root=/dev/nfs " \
  89                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  90         "netboot=echo Booting from net ...; " \
  91                 "run netargs; " \
  92                 "if test ${ip_dyn} = yes; then " \
  93                         "setenv get_cmd dhcp; " \
  94                 "else " \
  95                         "setenv get_cmd tftp; " \
  96                 "fi; " \
  97                 "${get_cmd} ${image}; " \
  98                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  99                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 100                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 101                         "else " \
 102                                 "if test ${boot_fdt} = try; then " \
 103                                         "bootz; " \
 104                                 "else " \
 105                                         "echo WARN: Cannot load the DT; " \
 106                                 "fi; " \
 107                         "fi; " \
 108                 "else " \
 109                         "bootz; " \
 110                 "fi;\0" \
 111         NANDARGS
 112
 113 /* NS16550 Configuration */
 114 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* UART0 */
 115 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 116 #define CONFIG_SYS_NS16550_COM3         0x48024000      /* UART2 */
 117 #define CONFIG_SYS_NS16550_COM4         0x481a6000      /* UART3 */
 118 #define CONFIG_SYS_NS16550_COM5         0x481a8000      /* UART4 */
 119 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 120
 121 /* PMIC support */
 122 #define CONFIG_POWER_TPS65217
 123
 124 /* SPL */
 125 /* Bootcount using the RTC block */
 126 #define CONFIG_BOOTCOUNT_LIMIT
 127 #define CONFIG_BOOTCOUNT_AM33XX
 128 #define CONFIG_SYS_BOOTCOUNT_BE
 129
 130 /* NAND: device related configs */
 131 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 132 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 133                                          CONFIG_SYS_NAND_PAGE_SIZE)
 134 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 135 #define CONFIG_SYS_NAND_OOBSIZE         64
 136 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 137 /* NAND: driver related configs */
 138 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 139 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 140                                          10, 11, 12, 13, 14, 15, 16, 17, \
 141                                          18, 19, 20, 21, 22, 23, 24, 25, \
 142                                          26, 27, 28, 29, 30, 31, 32, 33, \
 143                                          34, 35, 36, 37, 38, 39, 40, 41, \
 144                                          42, 43, 44, 45, 46, 47, 48, 49, \
 145                                          50, 51, 52, 53, 54, 55, 56, 57, }
 146
 147 #define CONFIG_SYS_NAND_ECCSIZE         512
 148 #define CONFIG_SYS_NAND_ECCBYTES        14
 149 #define CONFIG_SYS_NAND_ONFI_DETECTION
 150 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 151 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
 152 /* NAND: SPL related configs */
 153
 154 /* USB configuration */
 155 #define CONFIG_USB_MUSB_DSPS
 156 #define CONFIG_ARCH_MISC_INIT
 157 #define CONFIG_USB_MUSB_PIO_ONLY
 158 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 159 #define CONFIG_AM335X_USB1
 160 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 161
 162 /*
 163  * Disable MMC DM for SPL build and can be re-enabled after adding
 164  * DM support in SPL
 165  */
 166 #ifdef CONFIG_SPL_BUILD
 167 #undef CONFIG_DM_MMC
 168 #undef CONFIG_TIMER
 169 #endif
 170
 171 #if defined(CONFIG_ENV_IS_IN_NAND)
 172 #define CONFIG_ENV_OFFSET               0x001c0000
 173 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
 174 #define CONFIG_ENV_SIZE                 SZ_128K
 175 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_SYS_NAND_BLOCK_SIZE
 176 #else
 177 #define CONFIG_SYS_MMC_ENV_DEV          0
 178 #define CONFIG_ENV_OFFSET               SZ_128K
 179 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 180 #define CONFIG_ENV_SIZE                 SZ_8K
 181 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 182 #endif
 183
 184 /* Network. */
 185 #define CONFIG_PHY_SMSC
 186
 187 #endif  /* ! __CONFIG_CHILIBOARD_H */