include/configs/cgtqmx6eval.h

   1 /*
   2  *
   3  * Congatec Conga-QEVAl board configuration file.
   4  *
   5  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   6  * Based on Freescale i.MX6Q Sabre Lite board configuration file.
   7  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   8  * Leo Sartre, <lsartre@adeneo-embedded.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_CGTQMX6EVAL_H
  14 #define __CONFIG_CGTQMX6EVAL_H
  15
  16 #include "mx6_common.h"
  17
  18 #define CONFIG_MACH_TYPE        4122
  19
  20 #ifdef CONFIG_SPL
  21 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  22 #define CONFIG_SPL_MMC_SUPPORT
  23 #define CONFIG_SPL_SPI_SUPPORT
  24 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  25 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
  26 #define CONFIG_SPL_SPI_LOAD
  27 #include "imx6_spl.h"
  28 #endif
  29
  30 /* Size of malloc() pool */
  31 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  32
  33 #define CONFIG_BOARD_EARLY_INIT_F
  34 #define CONFIG_BOARD_LATE_INIT
  35 #define CONFIG_MISC_INIT_R
  36
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE           UART2_BASE
  39
  40 /* MMC Configs */
  41 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  42
  43 /* SPI NOR */
  44 #define CONFIG_SPI_FLASH
  45 #define CONFIG_SPI_FLASH_STMICRO
  46 #define CONFIG_SPI_FLASH_SST
  47 #define CONFIG_MXC_SPI
  48 #define CONFIG_SF_DEFAULT_BUS           0
  49 #define CONFIG_SF_DEFAULT_SPEED         20000000
  50 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  51
  52 /* Miscellaneous commands */
  53 #define CONFIG_CMD_BMODE
  54
  55 /* Thermal support */
  56 #define CONFIG_IMX_THERMAL
  57
  58 /* I2C Configs */
  59 #define CONFIG_SYS_I2C
  60 #define CONFIG_SYS_I2C_MXC
  61 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  62 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  63 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  64 #define CONFIG_SYS_I2C_SPEED              100000
  65
  66 /* PMIC */
  67 #define CONFIG_POWER
  68 #define CONFIG_POWER_I2C
  69 #define CONFIG_POWER_PFUZE100
  70 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  71
  72 /* USB Configs */
  73 #define CONFIG_USB_EHCI
  74 #define CONFIG_USB_EHCI_MX6
  75 #define CONFIG_USB_STORAGE
  76 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  77 #define CONFIG_USB_HOST_ETHER
  78 #define CONFIG_USB_ETHER_ASIX
  79 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  80 #define CONFIG_MXC_USB_FLAGS    0
  81 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
  82 #define CONFIG_USB_KEYBOARD
  83 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  84
  85 #define CONFIG_USBD_HS
  86
  87 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  88
  89 /* USB Device Firmware Update support */
  90 #define CONFIG_USB_FUNCTION_DFU
  91 #define CONFIG_DFU_MMC
  92 #define CONFIG_DFU_SF
  93
  94 #define CONFIG_USB_FUNCTION_FASTBOOT
  95 #define CONFIG_CMD_FASTBOOT
  96 #define CONFIG_ANDROID_BOOT_IMAGE
  97 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
  98 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
  99
 100 /* Framebuffer */
 101 #define CONFIG_VIDEO
 102 #define CONFIG_VIDEO_IPUV3
 103 #define CONFIG_CFB_CONSOLE
 104 #define CONFIG_VGA_AS_SINGLE_DEVICE
 105 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 106 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 107 #define CONFIG_VIDEO_BMP_RLE8
 108 #define CONFIG_SPLASH_SCREEN
 109 #define CONFIG_SPLASH_SCREEN_ALIGN
 110 #define CONFIG_BMP_16BPP
 111 #define CONFIG_VIDEO_LOGO
 112 #define CONFIG_VIDEO_BMP_LOGO
 113 #ifdef CONFIG_MX6DL
 114 #define CONFIG_IPUV3_CLK 198000000
 115 #else
 116 #define CONFIG_IPUV3_CLK 264000000
 117 #endif
 118 #define CONFIG_IMX_HDMI
 119
 120 /* SATA */
 121 #define CONFIG_CMD_SATA
 122 #define CONFIG_DWC_AHSATA
 123 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 124 #define CONFIG_DWC_AHSATA_PORT_ID       0
 125 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 126 #define CONFIG_LBA48
 127 #define CONFIG_LIBATA
 128
 129 /* Ethernet */
 130 #define CONFIG_FEC_MXC
 131 #define CONFIG_MII
 132 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 133 #define CONFIG_FEC_XCV_TYPE             RGMII
 134 #define CONFIG_ETHPRIME                 "FEC"
 135 #define CONFIG_FEC_MXC_PHYADDR          6
 136 #define CONFIG_PHYLIB
 137 #define CONFIG_PHY_ATHEROS
 138
 139 /* Command definition */
 140
 141 #define CONFIG_MXC_UART_BASE    UART2_BASE
 142 #define CONFIG_CONSOLE_DEV      "ttymxc1"
 143 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
 144 #define CONFIG_SYS_MMC_ENV_DEV          0
 145
 146 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 147 #define CONFIG_EXTRA_ENV_SETTINGS \
 148         "script=boot.scr\0" \
 149         "image=zImage\0" \
 150         "fdtfile=undefined\0" \
 151         "fdt_addr_r=0x18000000\0" \
 152         "boot_fdt=try\0" \
 153         "ip_dyn=yes\0" \
 154         "console=" CONFIG_CONSOLE_DEV "\0" \
 155         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
 156         "dfu_alt_info_spl=spl raw 0x400\0" \
 157         "dfu_alt_info_img=u-boot raw 0x10000\0" \
 158         "dfu_alt_info=spl raw 0x400\0" \
 159         "bootm_size=0x10000000\0" \
 160         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 161         "mmcpart=1\0" \
 162         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 163         "update_sd_firmware=" \
 164                 "if test ${ip_dyn} = yes; then " \
 165                         "setenv get_cmd dhcp; " \
 166                 "else " \
 167                         "setenv get_cmd tftp; " \
 168                 "fi; " \
 169                 "if mmc dev ${mmcdev}; then "   \
 170                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 171                                 "setexpr fw_sz ${filesize} / 0x200; " \
 172                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 173                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 174                         "fi; "  \
 175                 "fi\0" \
 176         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 177                 "root=${mmcroot}\0" \
 178         "loadbootscript=" \
 179                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 180         "bootscript=echo Running bootscript from mmc ...; " \
 181                 "source\0" \
 182         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 183         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 184         "mmcboot=echo Booting from mmc ...; " \
 185                 "run mmcargs; " \
 186                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 187                         "if run loadfdt; then " \
 188                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 189                         "else " \
 190                                 "if test ${boot_fdt} = try; then " \
 191                                         "bootz; " \
 192                                 "else " \
 193                                         "echo WARN: Cannot load the DT; " \
 194                                 "fi; " \
 195                         "fi; " \
 196                 "else " \
 197                         "bootz; " \
 198                 "fi;\0" \
 199         "findfdt="\
 200                 "if test $board_rev = MX6Q ; then " \
 201                         "setenv fdtfile imx6q-qmx6.dtb; fi; " \
 202                 "if test $board_rev = MX6DL ; then " \
 203                         "setenv fdtfile imx6dl-qmx6.dtb; fi; " \
 204                 "if test $fdtfile = undefined; then " \
 205                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 206         "netargs=setenv bootargs console=${console},${baudrate} " \
 207                 "root=/dev/nfs " \
 208                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 209         "netboot=echo Booting from net ...; " \
 210                 "run netargs; " \
 211                 "if test ${ip_dyn} = yes; then " \
 212                         "setenv get_cmd dhcp; " \
 213                 "else " \
 214                         "setenv get_cmd tftp; " \
 215                 "fi; " \
 216                 "${get_cmd} ${image}; " \
 217                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 218                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 219                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 220                         "else " \
 221                                 "if test ${boot_fdt} = try; then " \
 222                                         "bootz; " \
 223                                 "else " \
 224                                         "echo WARN: Cannot load the DT; " \
 225                                 "fi; " \
 226                         "fi; " \
 227                 "else " \
 228                         "bootz; " \
 229                 "fi;\0" \
 230         "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
 231
 232 #define CONFIG_BOOTCOMMAND \
 233         "run spilock;"      \
 234         "run findfdt; " \
 235         "mmc dev ${mmcdev};" \
 236         "if mmc rescan; then " \
 237                 "if run loadbootscript; then " \
 238                 "run bootscript; " \
 239                 "else " \
 240                         "if run loadimage; then " \
 241                                 "run mmcboot; " \
 242                         "else run netboot; " \
 243                         "fi; " \
 244                 "fi; " \
 245         "else run netboot; fi"
 246
 247 #define CONFIG_SYS_MEMTEST_START       0x10000000
 248 #define CONFIG_SYS_MEMTEST_END         0x10010000
 249 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 250
 251 /* Physical Memory Map */
 252 #define CONFIG_NR_DRAM_BANKS           1
 253 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 254 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 255
 256 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 257 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 258 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 259
 260 #define CONFIG_SYS_INIT_SP_OFFSET \
 261         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 262 #define CONFIG_SYS_INIT_SP_ADDR \
 263         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 264
 265 /* Environment organization */
 266 #if defined (CONFIG_ENV_IS_IN_MMC)
 267 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 268 #define CONFIG_SYS_MMC_ENV_DEV          0
 269 #endif
 270
 271 #define CONFIG_ENV_SIZE                 (8 * 1024)
 272
 273 #define CONFIG_ENV_IS_IN_SPI_FLASH
 274 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 275 #define CONFIG_ENV_OFFSET               (768 * 1024)
 276 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 277 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 278 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 279 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 280 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 281 #endif
 282
 283 #endif                         /* __CONFIG_CGTQMX6EVAL_H */