include/configs/brppt2.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Config file for BuR BRPP2_IMX6 board
   4  *
   5  * Copyright (C) 2018
   6  * B&R Industrial Automation GmbH - http://www.br-automation.com/
   7  */
   8 #ifndef __CONFIG_BRPP2_IMX6_H
   9 #define __CONFIG_BRPP2_IMX6_H
  10
  11 #include <configs/bur_cfg_common.h>
  12 #include <asm/arch/imx-regs.h>
  13
  14 /* -- i.mx6 specifica -- */
  15 #ifndef CONFIG_SYS_L2CACHE_OFF
  16 #define CONFIG_SYS_L2_PL310
  17 #define CONFIG_SYS_PL310_BASE           L2_PL310_BASE
  18 #endif /* !CONFIG_SYS_L2CACHE_OFF */
  19
  20 #define CONFIG_BOARD_POSTCLK_INIT
  21 #define CONFIG_MXC_GPT_HCLK
  22
  23 #define CONFIG_LOADADDR                 0x10700000
  24 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
  25
  26 /* MMC */
  27 #define CONFIG_FSL_USDHC
  28
  29 /* Boot */
  30 #define CONFIG_CMDLINE_TAG
  31 #define CONFIG_SETUP_MEMORY_TAGS
  32 #define CONFIG_INITRD_TAG
  33 #define CONFIG_MACH_TYPE                0xFFFFFFFF
  34
  35 /* misc */
  36 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  37
  38 /* Environment */
  39 #define CONFIG_ENV_OVERWRITE
  40
  41 #define CONFIG_EXTRA_ENV_SETTINGS \
  42 BUR_COMMON_ENV \
  43 "autoload=0\0" \
  44 "cfgaddr=0x106F0000\0" \
  45 "scraddr=0x10700000\0" \
  46 "loadaddr=0x10800000\0" \
  47 "dtbaddr=0x12000000\0" \
  48 "ramaddr=0x12100000\0" \
  49 "cfgscr=mw ${loadaddr} 0 128\0" \
  50 "cfgscrl=fdt addr ${dtbaddr} &&"\
  51 " sf probe; sf read ${cfgaddr} 0x40000 0x10000 && source ${cfgaddr}\0" \
  52 "console=ttymxc0,115200n8 consoleblank=0 quiet\0" \
  53 "t50args#0=setenv bootargs b_mode=${b_mode} console=${console} " \
  54         " root=/dev/mmcblk0p2 rootfstype=ext4 rootwait panic=2 \0" \
  55 "b_t50lgcy#0=" \
  56         "load ${loaddev}:2 ${loadaddr} /boot/zImage && " \
  57         "load ${loaddev}:2 ${dtbaddr} /boot/imx6dl-brppt50.dtb; " \
  58         "run t50args#0; run cfgscrl; bootz ${loadaddr} - ${dtbaddr}\0" \
  59 "t50args#1=setenv bootargs console=${console} b_mode=${b_mode}" \
  60         " rootwait panic=2\0" \
  61 "b_t50lgcy#1=" \
  62         "load ${loaddev}:1 ${loadaddr} zImage && " \
  63         "load ${loaddev}:1 ${dtbaddr} imx6dl-brppt50.dtb && " \
  64         "load ${loaddev}:1 ${ramaddr} rootfsPPT50.uboot && " \
  65         "run t50args#1; run cfgscrl; bootz ${loadaddr} ${ramaddr} ${dtbaddr}\0"\
  66 "b_mmc0=load ${loaddev}:1 ${scraddr} bootscr.img && source ${scraddr}\0" \
  67 "b_mmc1=load ${loaddev}:1 ${scraddr} /boot/bootscr.img && source ${scraddr}\0" \
  68 "b_usb0=usb start && load usb 0 ${scraddr} bootscr.img && source ${scraddr}\0" \
  69 "b_net=tftp ${scraddr} netscript.img && source ${scraddr}\0" \
  70 "b_tgts_std=mmc0 mmc1 t50lgcy#0 t50lgcy#1 usb0 net\0" \
  71 "b_tgts_rcy=t50lgcy#1 usb0 net\0" \
  72 "b_tgts_pme=net usb0 mmc0 mmc1\0" \
  73 "b_mode=4\0" \
  74 "b_break=0\0" \
  75 "b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
  76 " elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
  77 " else setenv b_tgts ${b_tgts_std}; fi\0" \
  78 "b_default=run b_deftgts; for target in ${b_tgts};"\
  79 " do echo \"### booting ${target} ###\"; run b_${target};" \
  80 " if test ${b_break} = 1; then; exit; fi; done\0" \
  81 "loaddev=mmc 0\0" \
  82 "altbootcmd=setenv b_mode 0; run b_default;\0" \
  83 "bootlimit=1\0" \
  84 "net2nor=sf probe && dhcp &&" \
  85 " tftp ${loadaddr} SPL && sf erase 0 +${filesize} &&" \
  86 " sf write ${loadaddr} 400 ${filesize} &&" \
  87 " tftp ${loadaddr} u-boot-dtb.img && sf erase 0x100000 +${filesize} &&" \
  88 " sf write ${loadaddr} 0x100000 ${filesize}\0"
  89
  90 /* RAM */
  91 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  92 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  93 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  94 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  95 #define CONFIG_SYS_INIT_SP_OFFSET \
  96         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  97 #define CONFIG_SYS_INIT_SP_ADDR \
  98         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  99
 100 /* Ethernet */
 101 #define CONFIG_MII
 102 #define CONFIG_FEC_XCV_TYPE             RGMII
 103 #define CONFIG_FEC_FIXED_SPEED          _1000BASET
 104 #define CONFIG_ARP_TIMEOUT              1500UL
 105
 106 /* USB Configs */
 107 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 108 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 109
 110 /* SPL */
 111 #ifdef CONFIG_SPL
 112 #include "imx6_spl.h"
 113
 114 #endif  /* CONFIG_SPL */
 115 #endif  /* __CONFIG_BRPP2_IMX6_H */