include/configs/brppt1.h

   1 /*
   2  * brtpp1.h
   3  *
   4  * specific parts for B&R T-Series Motherboard
   5  *
   6  * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
   7  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
   8  *
   9  * SPDX-License-Identifier:        GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_BRPPT1_H__
  13 #define __CONFIG_BRPPT1_H__
  14
  15 #include <configs/bur_cfg_common.h>
  16 #include <configs/bur_am335x_common.h>
  17 /* ------------------------------------------------------------------------- */
  18 #define CONFIG_AM335X_LCD
  19 #define CONFIG_LCD_ROTATION
  20 #define CONFIG_LCD_DT_SIMPLEFB
  21 #define LCD_BPP                         LCD_COLOR32
  22
  23 /* Bootcount using the RTC block */
  24 #define CONFIG_SYS_BOOTCOUNT_ADDR       0x44E3E000
  25 #define CONFIG_BOOTCOUNT_LIMIT
  26 #define CONFIG_BOOTCOUNT_AM33XX
  27
  28 /* memory */
  29 #define CONFIG_SYS_MALLOC_LEN           (5 * 1024 * 1024)
  30
  31 /* Clock Defines */
  32 #define V_OSCK                          26000000  /* Clock output from T2 */
  33 #define V_SCLK                          (V_OSCK)
  34
  35 #define CONFIG_POWER_TPS65217
  36
  37 /* Support both device trees and ATAGs. */
  38 #define CONFIG_USE_FDT                  /* use fdt within board code */
  39 #define CONFIG_CMDLINE_TAG
  40 #define CONFIG_SETUP_MEMORY_TAGS
  41 #define CONFIG_INITRD_TAG
  42 /*#define CONFIG_MACH_TYPE              3589*/
  43 #define CONFIG_MACH_TYPE                0xFFFFFFFF /* TODO: check with kernel*/
  44
  45 /* MMC/SD IP block */
  46 #if defined(CONFIG_EMMC_BOOT)
  47  #define CONFIG_SUPPORT_EMMC_BOOT
  48 #endif /* CONFIG_EMMC_BOOT */
  49
  50 /*
  51  * When we have SPI or NAND flash we expect to be making use of mtdparts,
  52  * both for ease of use in U-Boot and for passing information on to
  53  * the Linux kernel.
  54  */
  55 #if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
  56 #define CONFIG_MTD_DEVICE               /* Required for mtdparts */
  57 #define CONFIG_CMD_MTDPARTS
  58 #endif /* CONFIG_SPI_BOOT, ... */
  59
  60 #ifdef CONFIG_SPL_OS_BOOT
  61 #define CONFIG_SYS_SPL_ARGS_ADDR                0x80F80000
  62
  63 /* RAW SD card / eMMC */
  64 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900   /* address 0x120000 */
  65 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x80    /* address 0x10000 */
  66 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  0x80    /* 64KiB */
  67
  68 /* NAND */
  69 #ifdef CONFIG_NAND
  70 #define CONFIG_CMD_SPL_NAND_OFS                 0x080000 /* end of u-boot */
  71 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS         0x140000
  72 #define CONFIG_CMD_SPL_WRITE_SIZE               0x2000
  73 #endif /* CONFIG_NAND */
  74 #endif /* CONFIG_SPL_OS_BOOT */
  75
  76 #ifdef CONFIG_NAND
  77 #define CONFIG_SPL_NAND_AM33XX_BCH      /* OMAP4 and later ELM support */
  78 #define CONFIG_SPL_NAND_BASE
  79 #define CONFIG_SPL_NAND_DRIVERS
  80 #define CONFIG_SPL_NAND_ECC
  81 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  82 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
  83 #endif /* CONFIG_NAND */
  84
  85 /* Always 64 KiB env size */
  86 #define CONFIG_ENV_SIZE                 (64 << 10)
  87
  88 #ifdef CONFIG_NAND
  89 #define NANDARGS \
  90         "mtdids=" MTDIDS_DEFAULT "\0" \
  91         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  92         "nandargs=setenv bootargs console=${console} " \
  93                 "${optargs} " \
  94                 "${optargs_rot} " \
  95                 "root=mtd6 " \
  96                 "rootfstype=jffs2\0" \
  97         "kernelsize=0x400000\0" \
  98         "nandboot=echo booting from nand ...; " \
  99                 "run nandargs; " \
 100                 "nand read ${loadaddr} kernel ${kernelsize}; " \
 101                 "bootz ${loadaddr} - ${dtbaddr}\0" \
 102         "defboot=run nandboot\0" \
 103         "bootlimit=1\0" \
 104         "simplefb=1\0 " \
 105         "altbootcmd=run usbscript\0"
 106 #else
 107 #define NANDARGS ""
 108 #endif /* CONFIG_NAND */
 109
 110 #ifdef CONFIG_MMC
 111 #define MMCARGS \
 112 "dtbdev=mmc\0" \
 113 "dtbpart=0:1\0" \
 114 "mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
 115 "mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
 116         "root=/dev/mmcblk0p2 rootfstype=ext4\0" \
 117 "mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
 118         "setenv simplefb 1; " \
 119         "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
 120         "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
 121         "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
 122 "mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
 123         "setenv simplefb 0; " \
 124         "ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
 125         "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
 126 "defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
 127         "ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
 128         "run ramboot; run usbscript;\0" \
 129 "bootlimit=1\0" \
 130 "altbootcmd=run mmcboot0;\0" \
 131 "upduboot=dhcp; " \
 132         "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
 133         "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
 134 #else
 135 #define MMCARGS ""
 136 #endif /* CONFIG_MMC */
 137
 138 #ifndef CONFIG_SPL_BUILD
 139 #define CONFIG_EXTRA_ENV_SETTINGS \
 140 BUR_COMMON_ENV \
 141 "verify=no\0" \
 142 "autoload=0\0" \
 143 "dtb=bur-ppt-ts30.dtb\0" \
 144 "dtbaddr=0x80100000\0" \
 145 "loadaddr=0x80200000\0" \
 146 "ramaddr=0x80A00000\0" \
 147 "kernel=zImage\0" \
 148 "ramdisk=rootfs.cpio.uboot\0" \
 149 "console=ttyO0,115200n8\0" \
 150 "optargs=consoleblank=0 quiet panic=2\0" \
 151 "nfsroot=/tftpboot/tseries/rootfs-small\0" \
 152 "nfsopts=nolock\0" \
 153 "ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
 154 "netargs=setenv bootargs console=${console} " \
 155         "${optargs} " \
 156         "root=/dev/nfs " \
 157         "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
 158         "ip=dhcp\0" \
 159 "netboot=echo Booting from network ...; " \
 160         "dhcp; " \
 161         "tftp ${loadaddr} ${kernel}; " \
 162         "tftp ${dtbaddr} ${dtb}; " \
 163         "run netargs; " \
 164         "bootz ${loadaddr} - ${dtbaddr}\0" \
 165 "ramboot=echo Booting from network into RAM ...; "\
 166         "if dhcp; then; " \
 167         "tftp ${loadaddr} ${kernel}; " \
 168         "tftp ${ramaddr} ${ramdisk}; " \
 169         "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
 170         "then; else tftp ${dtbaddr} ${dtb}; fi;" \
 171         "run mmcroot0; " \
 172         "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
 173 "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
 174         "setenv autoload 0; " \
 175         "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
 176 NANDARGS \
 177 MMCARGS
 178 #endif /* !CONFIG_SPL_BUILD*/
 179
 180 #define CONFIG_BOOTCOMMAND \
 181         "run defboot;"
 182
 183 #ifdef CONFIG_NAND
 184 /*
 185  * GPMC  block.  We support 1 device and the physical address to
 186  * access CS0 at is 0x8000000.
 187  */
 188 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 189 #define CONFIG_SYS_NAND_BASE            0x8000000
 190 #define CONFIG_NAND_OMAP_GPMC
 191 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 192 #define CONFIG_NAND_OMAP_ELM
 193 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 194 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 195 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 196 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 197 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 198                                         CONFIG_SYS_NAND_PAGE_SIZE)
 199 #define CONFIG_SYS_NAND_OOBSIZE         64
 200 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 201 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9, \
 202                                         10, 11, 12, 13, 14, 15, 16, 17, \
 203                                         18, 19, 20, 21, 22, 23, 24, 25, \
 204                                         26, 27, 28, 29, 30, 31, 32, 33, \
 205                                         34, 35, 36, 37, 38, 39, 40, 41, \
 206                                         42, 43, 44, 45, 46, 47, 48, 49, \
 207                                         50, 51, 52, 53, 54, 55, 56, 57, }
 208
 209 #define CONFIG_SYS_NAND_ECCSIZE         512
 210 #define CONFIG_SYS_NAND_ECCBYTES        14
 211
 212 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 213 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 214
 215 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
 216 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:" \
 217                                         "128k(MLO)," \
 218                                         "128k(MLO.backup)," \
 219                                         "128k(dtb)," \
 220                                         "128k(u-boot-env)," \
 221                                         "512k(u-boot)," \
 222                                         "4m(kernel),"\
 223                                         "128m(rootfs),"\
 224                                         "-(user)"
 225 #define CONFIG_NAND_OMAP_GPMC_WSCFG     1
 226 #endif /* CONFIG_NAND */
 227
 228 /* USB configuration */
 229 #define CONFIG_USB_MUSB_DSPS
 230 #define CONFIG_USB_MUSB_PIO_ONLY
 231 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 232 #define CONFIG_AM335X_USB0
 233 #define CONFIG_AM335X_USB0_MODE MUSB_HOST
 234 #define CONFIG_AM335X_USB1
 235 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 236
 237 #if defined(CONFIG_SPI_BOOT)
 238 /* McSPI IP block */
 239 #define CONFIG_SPI
 240 #define CONFIG_OMAP3_SPI
 241 #define CONFIG_SF_DEFAULT_SPEED         24000000
 242
 243 #define CONFIG_SPL_SPI_LOAD
 244 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 245 #undef CONFIG_ENV_IS_NOWHERE
 246 #define CONFIG_ENV_IS_IN_SPI_FLASH
 247 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 248 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 249 #define CONFIG_ENV_SECT_SIZE            (4 << 10) /* 4 KB sectors */
 250 #define CONFIG_ENV_OFFSET               (768 << 10) /* 768 KiB in */
 251 #define CONFIG_ENV_OFFSET_REDUND        (896 << 10) /* 896 KiB in */
 252
 253 #elif defined(CONFIG_EMMC_BOOT)
 254 #undef CONFIG_ENV_IS_NOWHERE
 255 #define CONFIG_ENV_IS_IN_MMC
 256 #define CONFIG_SYS_MMC_ENV_DEV          0
 257 #define CONFIG_SYS_MMC_ENV_PART         2
 258 #define CONFIG_ENV_OFFSET               0x40000 /* TODO: Adresse definieren */
 259 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 260 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 261
 262 #elif defined(CONFIG_NAND)
 263 /* No NAND env support in SPL */
 264 #ifdef CONFIG_SPL_BUILD
 265 #define CONFIG_ENV_IS_NOWHERE
 266 #else
 267 #define CONFIG_ENV_IS_IN_NAND
 268 #endif
 269 #define CONFIG_ENV_OFFSET               0x60000
 270 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_ENV_SIZE
 271 #else
 272 #error "no storage for Environment defined!"
 273 #endif
 274 /*
 275  * Common filesystems support.  When we have removable storage we
 276  * enabled a number of useful commands and support.
 277  */
 278 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
 279 #define CONFIG_FS_EXT4
 280 #define CONFIG_EXT4_WRITE
 281 #endif /* CONFIG_MMC, ... */
 282
 283 #endif  /* ! __CONFIG_BRPPT1_H__ */