configs: Migrate CONFIG_SYS_TEXT_BASE
[platform/kernel/u-boot.git] / include / configs / brppt1.h
1 /*
2  * brtpp1.h
3  *
4  * specific parts for B&R T-Series Motherboard
5  *
6  * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
7  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
8  *
9  * SPDX-License-Identifier:        GPL-2.0+
10  */
11
12 #ifndef __CONFIG_BRPPT1_H__
13 #define __CONFIG_BRPPT1_H__
14
15 #include <configs/bur_cfg_common.h>
16 #include <configs/bur_am335x_common.h>
17 /* ------------------------------------------------------------------------- */
18 #define CONFIG_AM335X_LCD
19 #define CONFIG_LCD_ROTATION
20 #define CONFIG_LCD_DT_SIMPLEFB
21 #define LCD_BPP                         LCD_COLOR32
22
23 /* Bootcount using the RTC block */
24 #define CONFIG_SYS_BOOTCOUNT_ADDR       0x44E3E000
25 #define CONFIG_BOOTCOUNT_LIMIT
26 #define CONFIG_BOOTCOUNT_AM33XX
27
28 /* memory */
29 #define CONFIG_SYS_MALLOC_LEN           (5 * 1024 * 1024)
30
31 /* Clock Defines */
32 #define V_OSCK                          26000000  /* Clock output from T2 */
33 #define V_SCLK                          (V_OSCK)
34
35 #define CONFIG_POWER_TPS65217
36
37 /* Support both device trees and ATAGs. */
38 #define CONFIG_USE_FDT                  /* use fdt within board code */
39 #define CONFIG_CMDLINE_TAG
40 #define CONFIG_SETUP_MEMORY_TAGS
41 #define CONFIG_INITRD_TAG
42 /*#define CONFIG_MACH_TYPE              3589*/
43 #define CONFIG_MACH_TYPE                0xFFFFFFFF /* TODO: check with kernel*/
44
45 /* MMC/SD IP block */
46 #if defined(CONFIG_EMMC_BOOT)
47  #define CONFIG_SUPPORT_EMMC_BOOT
48 #endif /* CONFIG_EMMC_BOOT */
49
50 /*
51  * When we have SPI or NAND flash we expect to be making use of mtdparts,
52  * both for ease of use in U-Boot and for passing information on to
53  * the Linux kernel.
54  */
55 #if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
56 #define CONFIG_MTD_DEVICE               /* Required for mtdparts */
57 #endif /* CONFIG_SPI_BOOT, ... */
58
59 #ifdef CONFIG_SPL_OS_BOOT
60 #define CONFIG_SYS_SPL_ARGS_ADDR                0x80F80000
61
62 /* RAW SD card / eMMC */
63 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900   /* address 0x120000 */
64 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x80    /* address 0x10000 */
65 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  0x80    /* 64KiB */
66
67 /* NAND */
68 #ifdef CONFIG_NAND
69 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS         0x140000
70 #endif /* CONFIG_NAND */
71 #endif /* CONFIG_SPL_OS_BOOT */
72
73 #ifdef CONFIG_NAND
74 #define CONFIG_SPL_NAND_BASE
75 #define CONFIG_SPL_NAND_DRIVERS
76 #define CONFIG_SPL_NAND_ECC
77 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
78 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
79 #endif /* CONFIG_NAND */
80
81 /* Always 64 KiB env size */
82 #define CONFIG_ENV_SIZE                 (64 << 10)
83
84 #ifdef CONFIG_NAND
85 #define NANDARGS \
86         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
87         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
88         "nandargs=setenv bootargs console=${console} " \
89                 "${optargs} " \
90                 "${optargs_rot} " \
91                 "root=mtd6 " \
92                 "rootfstype=jffs2\0" \
93         "kernelsize=0x400000\0" \
94         "nandboot=echo booting from nand ...; " \
95                 "run nandargs; " \
96                 "nand read ${loadaddr} kernel ${kernelsize}; " \
97                 "bootz ${loadaddr} - ${dtbaddr}\0" \
98         "defboot=run nandboot\0" \
99         "bootlimit=1\0" \
100         "simplefb=1\0 " \
101         "altbootcmd=run usbscript\0"
102 #else
103 #define NANDARGS ""
104 #endif /* CONFIG_NAND */
105
106 #ifdef CONFIG_MMC
107 #define MMCARGS \
108 "dtbdev=mmc\0" \
109 "dtbpart=1:1\0" \
110 "mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
111 "mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
112         "root=/dev/mmcblk0p2 rootfstype=ext4\0" \
113 "mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
114         "setenv simplefb 1; " \
115         "ext4load mmc 1:1 ${loadaddr} /${kernel}; " \
116         "ext4load mmc 1:1 ${ramaddr} /${ramdisk}; " \
117         "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
118 "mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
119         "setenv simplefb 0; " \
120         "ext4load mmc 1:2 ${loadaddr} /boot/${kernel}; " \
121         "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
122 "defboot=ext4load mmc 1:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
123         "ext4load mmc 1:1 ${dtbaddr} /$dtb && run mmcboot0; " \
124         "run ramboot; run usbscript;\0" \
125 "bootlimit=1\0" \
126 "altbootcmd=mmc dev 1; run mmcboot0;\0" \
127 "upduboot=dhcp; " \
128         "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
129         "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
130 #else
131 #define MMCARGS ""
132 #endif /* CONFIG_MMC */
133
134 #ifndef CONFIG_SPL_BUILD
135 #define CONFIG_EXTRA_ENV_SETTINGS \
136 BUR_COMMON_ENV \
137 "verify=no\0" \
138 "autoload=0\0" \
139 "dtb=bur-ppt-ts30.dtb\0" \
140 "dtbaddr=0x80100000\0" \
141 "loadaddr=0x80200000\0" \
142 "ramaddr=0x80A00000\0" \
143 "kernel=zImage\0" \
144 "ramdisk=rootfs.cpio.uboot\0" \
145 "console=ttyO0,115200n8\0" \
146 "optargs=consoleblank=0 quiet panic=2\0" \
147 "nfsroot=/tftpboot/tseries/rootfs-small\0" \
148 "nfsopts=nolock\0" \
149 "ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
150 "netargs=setenv bootargs console=${console} " \
151         "${optargs} " \
152         "root=/dev/nfs " \
153         "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
154         "ip=dhcp\0" \
155 "netboot=echo Booting from network ...; " \
156         "dhcp; " \
157         "tftp ${loadaddr} ${kernel}; " \
158         "tftp ${dtbaddr} ${dtb}; " \
159         "run netargs; " \
160         "bootz ${loadaddr} - ${dtbaddr}\0" \
161 "ramboot=echo Booting from network into RAM ...; "\
162         "if dhcp; then; " \
163         "tftp ${loadaddr} ${kernel}; " \
164         "tftp ${ramaddr} ${ramdisk}; " \
165         "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
166         "then; else tftp ${dtbaddr} ${dtb}; fi;" \
167         "run mmcroot0; " \
168         "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
169 "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
170         "setenv autoload 0; " \
171         "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
172 NANDARGS \
173 MMCARGS
174 #endif /* !CONFIG_SPL_BUILD*/
175
176 #define CONFIG_BOOTCOMMAND \
177         "mmc dev 1; run defboot;"
178
179 #ifdef CONFIG_NAND
180 /*
181  * GPMC  block.  We support 1 device and the physical address to
182  * access CS0 at is 0x8000000.
183  */
184 #define CONFIG_SYS_MAX_NAND_DEVICE      1
185 #define CONFIG_SYS_NAND_BASE            0x8000000
186 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
187 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
188 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
189 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
190 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
191 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
192                                         CONFIG_SYS_NAND_PAGE_SIZE)
193 #define CONFIG_SYS_NAND_OOBSIZE         64
194 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
195 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9, \
196                                         10, 11, 12, 13, 14, 15, 16, 17, \
197                                         18, 19, 20, 21, 22, 23, 24, 25, \
198                                         26, 27, 28, 29, 30, 31, 32, 33, \
199                                         34, 35, 36, 37, 38, 39, 40, 41, \
200                                         42, 43, 44, 45, 46, 47, 48, 49, \
201                                         50, 51, 52, 53, 54, 55, 56, 57, }
202
203 #define CONFIG_SYS_NAND_ECCSIZE         512
204 #define CONFIG_SYS_NAND_ECCBYTES        14
205
206 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
207 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
208
209 #define CONFIG_NAND_OMAP_GPMC_WSCFG     1
210 #endif /* CONFIG_NAND */
211
212 /* USB configuration */
213 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
214 #define CONFIG_AM335X_USB0
215 #define CONFIG_AM335X_USB0_MODE MUSB_HOST
216 #define CONFIG_AM335X_USB1
217 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
218
219 #if defined(CONFIG_SPI_BOOT)
220 /* McSPI IP block */
221 #define CONFIG_SPI
222 #define CONFIG_SF_DEFAULT_SPEED         24000000
223
224 #define CONFIG_SPL_SPI_LOAD
225 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
226 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
227 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
228 #define CONFIG_ENV_SECT_SIZE            (4 << 10) /* 4 KB sectors */
229 #define CONFIG_ENV_OFFSET               (768 << 10) /* 768 KiB in */
230 #define CONFIG_ENV_OFFSET_REDUND        (896 << 10) /* 896 KiB in */
231
232 #elif defined(CONFIG_EMMC_BOOT)
233 #define CONFIG_SYS_MMC_ENV_DEV          1
234 #define CONFIG_SYS_MMC_ENV_PART         2
235 #define CONFIG_ENV_OFFSET               0x40000 /* TODO: Adresse definieren */
236 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
237 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
238
239 #elif defined(CONFIG_NAND)
240 /* No NAND env support in SPL */
241 #define CONFIG_ENV_OFFSET               0x60000
242 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_ENV_SIZE
243 #else
244 #error "no storage for Environment defined!"
245 #endif
246
247 #endif  /* ! __CONFIG_BRPPT1_H__ */