include/configs/bluestone.h

   1 /*
   2  * bluestone.h - configuration for Bluestone (APM821XX)
   3  *
   4  * Copyright (c) 2010, Applied Micro Circuits Corporation
   5  * Author: Tirumala R Marri <tmarri@apm.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_APM821XX         1       /* APM821XX series    */
  17 #define CONFIG_HOSTNAME         bluestone
  18
  19 #define CONFIG_4xx              1       /* ... PPC4xx family */
  20 #define CONFIG_440              1
  21
  22 #ifndef CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_SYS_TEXT_BASE    0xFFFA0000
  24 #endif
  25
  26 /*
  27  * Include common defines/options for all AMCC eval boards
  28  */
  29 #include "amcc-common.h"
  30 #define CONFIG_SYS_CLK_FREQ     50000000
  31
  32 #define CONFIG_BOARD_TYPES              1       /* support board types */
  33 #define CONFIG_BOARD_EARLY_INIT_F       1       /* Call board_early_init_f */
  34 #define CONFIG_MISC_INIT_R              1       /* Call misc_init_r */
  35
  36 /*
  37  * Base addresses -- Note these are effective addresses where the
  38  * actual resources get mapped (not physical addresses)
  39  */
  40 /* EBC stuff */
  41 /* later mapped to this addr */
  42 #define CONFIG_SYS_FLASH_BASE           0xFFF00000
  43 #define CONFIG_SYS_FLASH_SIZE           (4 << 20)       /* 1MB usable */
  44
  45 /* EBC Boot Space: 0xFF000000 */
  46 #define CONFIG_SYS_BOOT_BASE_ADDR       0xFF000000
  47 #define CONFIG_SYS_OCM_BASE             0xE3000000 /* OCM: 32k             */
  48 #define CONFIG_SYS_SRAM_BASE            0xE8000000 /* SRAM: 256k           */
  49 #define CONFIG_SYS_AHB_BASE             0xE2000000 /* internal AHB peripherals*/
  50
  51 #define CONFIG_SYS_SRAM_SIZE            (256 << 10)
  52 /*
  53  * Initial RAM & stack pointer (placed in OCM)
  54  */
  55 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_BASE     /* OCM    */
  56 #define CONFIG_SYS_INIT_RAM_SIZE                (4 << 10)
  57 #define CONFIG_SYS_GBL_DATA_OFFSET      \
  58         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  59 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  60
  61 /*
  62  * Environment
  63  */
  64 /*
  65  * Define here the location of the environment variables (FLASH).
  66  */
  67 #define CONFIG_ENV_IS_IN_FLASH  1       /* use FLASH for environment vars */
  68
  69 /*
  70  * FLASH related
  71  */
  72 #define CONFIG_SYS_FLASH_CFI    /* The flash is CFI compatible  */
  73 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver        */
  74 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_8BIT
  75 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
  76 /* max number of memory banks           */
  77 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  78 /* max number of sectors on one chip    */
  79 #define CONFIG_SYS_MAX_FLASH_SECT       80
  80 /* Timeout for Flash Erase (in ms)      */
  81 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000
  82 /* Timeout for Flash Write (in ms)      */
  83 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
  84 /* use buffered writes (20x faster)     */
  85 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
  86 /* print 'E' for empty sector on flinfo */
  87 #define CONFIG_SYS_FLASH_EMPTY_INFO
  88 #ifdef CONFIG_ENV_IS_IN_FLASH
  89 #define CONFIG_ENV_SECT_SIZE    0x10000 /* size of one complete sector  */
  90 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  91 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector   */
  92 /* Address and size of Redundant Environment Sector     */
  93 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
  94 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
  95 #endif /* CONFIG_ENV_IS_IN_FLASH */
  96
  97 /* SDRAM */
  98 #define CONFIG_SPD_EEPROM       1       /* Use SPD EEPROM for setup     */
  99 #define SPD_EEPROM_ADDRESS      {0x53, 0x51}    /* SPD i2c spd addresses */
 100 #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration */
 101 #define CONFIG_AUTOCALIB        "silent\0"      /* default is non-verbose    */
 102 #define CONFIG_DDR_ECC          1       /* with ECC support             */
 103
 104 /*
 105  * Serial Port
 106  */
 107 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 108
 109 /*
 110  * I2C
 111  */
 112 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
 113 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 114 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x54
 115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 116 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 117 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5       /* Data sheet */
 118
 119 /* I2C bootstrap EEPROM */
 120 #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR       0x52
 121 #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET     0
 122 #define CONFIG_4xx_CONFIG_BLOCKSIZE             16
 123
 124 /*
 125  * Ethernet
 126  */
 127 #define CONFIG_IBM_EMAC4_V4     1
 128 #define CONFIG_EMAC_PHY_MODE    EMAC_PHY_MODE_NONE_RGMII
 129 #define CONFIG_HAS_ETH0
 130 /* PHY address, See schematics  */
 131 #define CONFIG_PHY_ADDR                 0x1f
 132 /* reset phy upon startup       */
 133 #define CONFIG_PHY_RESET                1
 134 /* Include GbE speed/duplex detection */
 135 #define CONFIG_PHY_GIGE                 1
 136 #define CONFIG_PHY_DYNAMIC_ANEG         1
 137
 138 /*
 139  * External Bus Controller (EBC) Setup
 140  **/
 141 #define CONFIG_SYS_EBC_CFG      (EBC_CFG_LE_LOCK    |   \
 142                                  EBC_CFG_PTD_ENABLE   | \
 143                                  EBC_CFG_RTC_2048PERCLK | \
 144                                  EBC_CFG_ATC_HI | \
 145                                  EBC_CFG_DTC_HI | \
 146                                  EBC_CFG_CTC_HI | \
 147                                  EBC_CFG_OEO_PREVIOUS)
 148 /* NOR Flash */
 149 #define CONFIG_SYS_EBC_PB0AP    (EBC_BXAP_BME_DISABLED   | \
 150                                 EBC_BXAP_TWT_ENCODE(64)  | \
 151                                 EBC_BXAP_BCE_DISABLE    | \
 152                                 EBC_BXAP_BCT_2TRANS     | \
 153                                 EBC_BXAP_CSN_ENCODE(1)  | \
 154                                 EBC_BXAP_OEN_ENCODE(2)  | \
 155                                 EBC_BXAP_WBN_ENCODE(2)  | \
 156                                 EBC_BXAP_WBF_ENCODE(2)  | \
 157                                 EBC_BXAP_TH_ENCODE(7)   | \
 158                                 EBC_BXAP_SOR_DELAYED    | \
 159                                 EBC_BXAP_BEM_WRITEONLY  | \
 160                                 EBC_BXAP_PEN_DISABLED)
 161 /* Peripheral Bank Configuration Register - EBC_BxCR */
 162 #define CONFIG_SYS_EBC_PB0CR    \
 163                         (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
 164                         EBC_BXCR_BS_1MB                | \
 165                         EBC_BXCR_BU_RW                  | \
 166                         EBC_BXCR_BW_8BIT)
 167
 168
 169 #endif /* __CONFIG_H */