include/configs/bav335x.h

   1 /*
   2  * bav335x.h
   3  *
   4  * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem
   5  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation version 2.
  10  *
  11  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  12  * kind, whether express or implied; without even the implied warranty
  13  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16
  17 #ifndef __CONFIG_BAV335X_H
  18 #define __CONFIG_BAV335X_H
  19
  20 #include <configs/ti_am335x_common.h>
  21
  22 #ifndef CONFIG_SPL_BUILD
  23 # define CONFIG_TIMESTAMP
  24 #endif
  25
  26 #define CONFIG_SYS_BOOTM_LEN            (16 << 20)
  27
  28 #define CONFIG_MACH_TYPE                MACH_TYPE_AM335XEVM
  29
  30 /* Clock Defines */
  31 #define V_OSCK                          24000000  /* Clock output from T2 */
  32 #define V_SCLK                          (V_OSCK)
  33
  34 #ifdef CONFIG_MTD_RAW_NAND
  35 #define NANDARGS \
  36         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  37         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  38         "nandargs=setenv bootargs console=${console} " \
  39                 "${optargs} " \
  40                 "root=${nandroot} " \
  41                 "rootfstype=${nandrootfstype}\0" \
  42         "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
  43         "nandrootfstype=ubifs rootwait=1\0" \
  44         "nandboot=echo Booting from nand ...; " \
  45                 "run nandargs; " \
  46                 "nand read ${fdtaddr} u-boot-spl-os; " \
  47                 "nand read ${loadaddr} kernel; " \
  48                 "bootz ${loadaddr} - ${fdtaddr}\0"
  49 #else
  50 #define NANDARGS ""
  51 #endif
  52
  53 #ifndef CONFIG_SPL_BUILD
  54 #define CONFIG_EXTRA_ENV_SETTINGS \
  55 DEFAULT_LINUX_BOOT_ENV \
  56 "boot_fdt=try\0" \
  57 "bootpart=0:2\0" \
  58 "bootdir=\0" \
  59 "fdtdir=/dtbs\0" \
  60 "bootfile=zImage\0" \
  61 "fdtfile=undefined\0" \
  62 "console=ttyO0,115200n8\0" \
  63 "loadaddr=0x82000000\0" \
  64 "fdtaddr=0x88000000\0" \
  65 "rdaddr=0x88080000\0" \
  66 "initrd_high=0xffffffff\0" \
  67 "fdt_high=0xffffffff\0" \
  68 "partitions=" \
  69         "uuid_disk=${uuid_gpt_disk};" \
  70         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
  71 "optargs=\0" \
  72 "cmdline=\0" \
  73 "mmcdev=0\0" \
  74 "mmcpart=1\0" \
  75 "mmcroot=/dev/mmcblk0p2 ro\0" \
  76 "mmcrootfstype=ext4 rootwait fixrtc\0" \
  77 "rootpath=/export/rootfs\0" \
  78 "nfsopts=nolock\0" \
  79 "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
  80 "ramroot=/dev/ram0 rw\0" \
  81 "ramrootfstype=ext2\0" \
  82 "mmcargs=setenv bootargs console=${console} ${optargs} " \
  83         "root=${mmcroot} rootfstype=${mmcrootfstype} ${cmdline}\0" \
  84 "server_ip=192.168.1.100\0" \
  85 "gw_ip=192.168.1.1\0" \
  86 "netmask=255.255.255.0\0" \
  87 "hostname=\0" \
  88 "device=eth0\0" \
  89 "autoconf=off\0" \
  90 "root_dir=/home/userid/targetNFS\0" \
  91 "nfs_options=,vers=3\0" \
  92 "nfsrootfstype=ext4 rootwait fixrtc\0" \
  93 "nfsargs=setenv bootargs console=${console} ${optargs} " \
  94         "root=/dev/nfs rw rootfstype=${nfsrootfstype} " \
  95         "nfsroot=${nfsroot} ip=${ip} ${cmdline}\0" \
  96 "netargs=setenv bootargs console=${console} " \
  97         "${optargs} root=/dev/nfs " \
  98         "nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp\0" \
  99 "bootenv=uEnv.txt\0" \
 100 "script=boot.scr\0" \
 101 "scriptfile=${script}\0" \
 102 "loadbootscript=load mmc ${bootpart} ${loadaddr} ${scriptfile};\0" \
 103 "bootscript=echo Running bootscript from mmc${bootpart} ...; " \
 104         "source ${loadaddr}\0" \
 105         "loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \
 106 "importbootenv=echo Importing environment from mmc ...; " \
 107         "env import -t -r $loadaddr $filesize\0" \
 108 "ramargs=setenv bootargs console=${console} " \
 109         "${optargs} root=${ramroot} rootfstype=${ramrootfstype}\0" \
 110 "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
 111 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 112         "loadrd=load mmc ${bootpart} ${rdaddr} " \
 113         "${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \
 114 "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; " \
 115         "load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
 116 "mmcboot=mmc dev ${mmcdev}; " \
 117         "if mmc rescan; then " \
 118                 "gpio set 54;" \
 119                 "setenv bootpart ${mmcdev}:1; " \
 120                 "if test -e mmc ${bootpart} /etc/fstab; then " \
 121                         "setenv mmcpart 1;" \
 122                 "fi; " \
 123                 "echo Checking for: /uEnv.txt ...;" \
 124                 "if test -e mmc ${bootpart} /uEnv.txt; then " \
 125                         "if run loadbootenv; then " \
 126                                 "gpio set 55;" \
 127                                 "echo Loaded environment from ${bootenv};" \
 128                                 "run importbootenv;" \
 129                         "fi;" \
 130                         "echo Checking if uenvcmd is set ...;" \
 131                         "if test -n ${uenvcmd}; then " \
 132                                 "gpio set 56; " \
 133                                 "echo Running uenvcmd ...;" \
 134                                 "run uenvcmd;" \
 135                         "fi;" \
 136                         "echo Checking if client_ip is set ...;" \
 137                         "if test -n ${client_ip}; then " \
 138                                 "if test -n ${dtb}; then " \
 139                                         "setenv fdtfile ${dtb};" \
 140                                         "echo using ${fdtfile} ...;" \
 141                                 "fi;" \
 142                                 "gpio set 56; " \
 143                                 "if test -n ${uname_r}; then " \
 144                                         "echo Running nfsboot_uname_r ...;" \
 145                                         "run nfsboot_uname_r;" \
 146                                 "fi;" \
 147                                 "echo Running nfsboot ...;" \
 148                                 "run nfsboot;" \
 149                         "fi;" \
 150                 "fi; " \
 151                 "echo Checking for: /${script} ...;" \
 152                 "if test -e mmc ${bootpart} /${script}; then " \
 153                         "gpio set 55;" \
 154                         "setenv scriptfile ${script};" \
 155                         "run loadbootscript;" \
 156                         "echo Loaded script from ${scriptfile};" \
 157                         "gpio set 56; " \
 158                         "run bootscript;" \
 159                 "fi; " \
 160                 "echo Checking for: /boot/${script} ...;" \
 161                 "if test -e mmc ${bootpart} /boot/${script}; then " \
 162                         "gpio set 55;" \
 163                         "setenv scriptfile /boot/${script};" \
 164                         "run loadbootscript;" \
 165                         "echo Loaded script from ${scriptfile};" \
 166                         "gpio set 56; " \
 167                         "run bootscript;" \
 168                 "fi; " \
 169                 "echo Checking for: /boot/uEnv.txt ...;" \
 170                 "for i in 1 2 3 4 5 6 7 ; do " \
 171                         "setenv mmcpart ${i};" \
 172                         "setenv bootpart ${mmcdev}:${mmcpart};" \
 173                         "if test -e mmc ${bootpart} /boot/uEnv.txt; then " \
 174                                 "gpio set 55;" \
 175                                 "load mmc ${bootpart} ${loadaddr} " \
 176                                                 "/boot/uEnv.txt;" \
 177                                 "env import -t ${loadaddr} ${filesize};" \
 178                                 "echo Loaded environment from /boot/uEnv.txt;" \
 179                                 "if test -n ${dtb}; then " \
 180                                         "setenv fdtfile ${dtb};" \
 181                                         "echo Using: dtb=${fdtfile} ...;" \
 182                                 "fi;" \
 183                                 "echo Checking if uname_r is set in " \
 184                                                 "/boot/uEnv.txt...;" \
 185                                 "if test -n ${uname_r}; then " \
 186                                         "gpio set 56; " \
 187                                         "echo Running uname_boot ...;" \
 188                                         "setenv mmcroot /dev/mmcblk${mmcdev}" \
 189                                                         "p${mmcpart} ro;" \
 190                                         "run uname_boot;" \
 191                                 "fi;" \
 192                         "fi;" \
 193                 "done;" \
 194         "fi;\0" \
 195 "netboot=echo Booting from network ...; " \
 196         "setenv autoload no; " \
 197         "dhcp; " \
 198         "tftp ${loadaddr} ${bootfile}; " \
 199         "tftp ${fdtaddr} ${fdtfile}; " \
 200         "run netargs; " \
 201         "bootz ${loadaddr} - ${fdtaddr}\0" \
 202 "nfsboot=echo Booting from ${server_ip} ...; " \
 203         "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
 204         "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \
 205         ":${device}:${autoconf}; " \
 206         "setenv autoload no; " \
 207         "setenv serverip ${server_ip}; " \
 208         "setenv ipaddr ${client_ip}; " \
 209         "tftp ${loadaddr} ${bootfile}; " \
 210         "tftp ${fdtaddr} dtbs/${fdtfile}; " \
 211         "run nfsargs; " \
 212         "bootz ${loadaddr} - ${fdtaddr}\0" \
 213 "nfsboot_uname_r=echo Booting from ${server_ip} ...; " \
 214         "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
 215         "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \
 216                         ":${device}:${autoconf}; " \
 217         "setenv autoload no; " \
 218         "setenv serverip ${server_ip}; " \
 219         "setenv ipaddr ${client_ip}; " \
 220         "tftp ${loadaddr} vmlinuz-${uname_r}; " \
 221         "tftp ${fdtaddr} dtbs/${uname_r}/${fdtfile}; " \
 222         "run nfsargs; " \
 223         "bootz ${loadaddr} - ${fdtaddr}\0" \
 224 "ramboot=echo Booting from ramdisk ...; " \
 225         "run ramargs; " \
 226         "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 227 "findfdt="\
 228         "if test $board_rev = B; then " \
 229                 "setenv fdtfile birdland_bav335b.dtb; " \
 230                 "setenv fdtbase am335x-boneblack; fi; " \
 231         "if test $board_rev = A; then " \
 232                 "setenv fdtfile birdland_bav335a.dtb; " \
 233                 "setenv fdtbase am335x-boneblack; fi; " \
 234         "if test $fdtfile = undefined; then " \
 235                 "echo WARNING: Could not determine device tree to use; fi; \0" \
 236 "uname_boot="\
 237         "setenv bootdir /boot; " \
 238         "setenv bootfile vmlinuz-${uname_r}; " \
 239         "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \
 240                 "echo loading ${bootdir}/${bootfile} ...; "\
 241                 "run loadimage;" \
 242                 "setenv fdtdir /boot/dtbs/${uname_r}; " \
 243                 "if test -e mmc ${bootpart} ${fdtdir}/${fdtfile}; then " \
 244                         "run loadfdt;" \
 245                 "else " \
 246                         "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \
 247                         "if test -e mmc ${bootpart} ${fdtdir}/" \
 248                                         "${fdtfile}; then " \
 249                                 "run loadfdt;" \
 250                         "else " \
 251                                 "setenv fdtdir /boot/dtb-${uname_r}; " \
 252                                 "if test -e mmc ${bootpart} ${fdtdir}" \
 253                                                 "/${fdtfile}; then " \
 254                                         "run loadfdt;" \
 255                                 "else " \
 256                                         "setenv fdtdir /boot/dtbs; " \
 257                                         "if test -e mmc ${bootpart} ${fdtdir}" \
 258                                                         "/${fdtfile}; then " \
 259                                                 "run loadfdt;" \
 260                                         "else " \
 261                                                 "echo; echo unable to find " \
 262                                                         "[${fdtfile}] " \
 263                                                 "did you name it correctly?" \
 264                                                 "echo booting fallback " \
 265                                                         "[/boot/dtbs/" \
 266                                                         "${uname_r}" \
 267                                                         "/${fdtbase}.dtb]...;" \
 268                                                 "setenv fdtdir /boot/dtbs/" \
 269                                                         "${uname_r}; " \
 270                                                 "setenv fdtfile " \
 271                                                         "${fdtbase}.dtb; " \
 272                                                 "run loadfdt;" \
 273                                         "fi;" \
 274                                 "fi;" \
 275                         "fi;" \
 276                 "fi;" \
 277         "fi; " \
 278         "setenv rdfile initrd.img-${uname_r}; " \
 279         "if test -e mmc ${bootpart} ${bootdir}/${rdfile}; then " \
 280                 "echo loading ${bootdir}/${rdfile} ...; "\
 281                 "run loadrd;" \
 282                 "if test -n ${uuid}; then " \
 283                         "setenv mmcroot UUID=${uuid} ro;" \
 284                 "fi;" \
 285                 "run mmcargs;" \
 286                 "echo debug: [${bootargs}] ... ;" \
 287                 "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} " \
 288                                         "${fdtaddr}] ... ;" \
 289                 "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
 290         "else " \
 291                 "run mmcargs;" \
 292                 "echo debug: [${bootargs}] ... ;" \
 293                 "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
 294                 "bootz ${loadaddr} - ${fdtaddr}; " \
 295         "fi;" \
 296 "fi;\0" \
 297         NANDARGS \
 298         DFUARGS
 299 #endif
 300
 301 #define CONFIG_BOOTCOMMAND \
 302         "gpio set 53; " \
 303         "i2c mw 0x24 1 0x3e; " \
 304         "run findfdt; " \
 305         "setenv mmcdev 0; " \
 306         "setenv bootpart 0:1; " \
 307         "run mmcboot;" \
 308         "gpio clear 56; " \
 309         "gpio clear 55; " \
 310         "gpio clear 54; " \
 311         "setenv mmcdev 1; " \
 312         "setenv bootpart 1:1; " \
 313         "run mmcboot;"
 314
 315 /* NS16550 Configuration */
 316 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* UART0 */
 317 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 318 #define CONFIG_SYS_NS16550_COM3         0x48024000      /* UART2 */
 319 #define CONFIG_SYS_NS16550_COM4         0x481a6000      /* UART3 */
 320 #define CONFIG_SYS_NS16550_COM5         0x481a8000      /* UART4 */
 321 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 322
 323 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 324 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
 325 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 326
 327 /* PMIC support */
 328 #define CONFIG_POWER_TPS65217
 329 #define CONFIG_POWER_TPS65910
 330
 331 /* SPL */
 332 #ifndef CONFIG_NOR_BOOT
 333 /* Bootcount using the RTC block */
 334 #define CONFIG_SYS_BOOTCOUNT_BE
 335
 336 /* USB gadget RNDIS */
 337 #endif
 338
 339 #ifdef CONFIG_MTD_RAW_NAND
 340 /* NAND: device related configs */
 341 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 342 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 343                                          CONFIG_SYS_NAND_PAGE_SIZE)
 344 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 345 #define CONFIG_SYS_NAND_OOBSIZE         64
 346 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 347 /* NAND: driver related configs */
 348 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 349 #define CONFIG_SYS_NAND_ECCPOS  { \
 350         2, 3, 4, 5, 6, 7, 8, 9, \
 351         10, 11, 12, 13, 14, 15, 16, 17, \
 352         18, 19, 20, 21, 22, 23, 24, 25, \
 353         26, 27, 28, 29, 30, 31, 32, 33, \
 354         34, 35, 36, 37, 38, 39, 40, 41, \
 355         42, 43, 44, 45, 46, 47, 48, 49, \
 356         50, 51, 52, 53, 54, 55, 56, 57, }
 357
 358 #define CONFIG_SYS_NAND_ECCSIZE         512
 359 #define CONFIG_SYS_NAND_ECCBYTES        14
 360 #define CONFIG_SYS_NAND_ONFI_DETECTION
 361 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 362 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
 363 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_SYS_NAND_BLOCK_SIZE
 364 /* NAND: SPL related configs */
 365 #ifdef CONFIG_SPL_OS_BOOT
 366 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
 367 #endif
 368 #endif /* !CONFIG_MTD_RAW_NAND */
 369
 370 /*
 371  * For NOR boot, we must set this to the start of where NOR is mapped
 372  * in memory.
 373  */
 374
 375 /*
 376  * USB configuration.  We enable MUSB support, both for host and for
 377  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 378  * board schematic and physical port wired to each.  Then for host we
 379  * add mass storage support and for gadget we add both RNDIS ethernet
 380  * and DFU.
 381  */
 382 #define CONFIG_AM335X_USB0
 383 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 384 #define CONFIG_AM335X_USB1
 385 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 386
 387 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USB_ETHER)
 388 /* disable host part of MUSB in SPL */
 389 /* disable EFI partitions and partition UUID support */
 390 #endif
 391
 392 /* USB Device Firmware Update support */
 393 #ifndef CONFIG_SPL_BUILD
 394 #define DFU_ALT_INFO_MMC \
 395         "dfu_alt_info_mmc=" \
 396         "boot part 0 1;" \
 397         "rootfs part 0 2;" \
 398         "MLO fat 0 1;" \
 399         "MLO.raw raw 0x100 0x100;" \
 400         "u-boot.img.raw raw 0x300 0x400;" \
 401         "spl-os-args.raw raw 0x80 0x80;" \
 402         "spl-os-image.raw raw 0x900 0x2000;" \
 403         "spl-os-args fat 0 1;" \
 404         "spl-os-image fat 0 1;" \
 405         "u-boot.img fat 0 1;" \
 406         "uEnv.txt fat 0 1\0"
 407 #ifdef CONFIG_MTD_RAW_NAND
 408 #define DFU_ALT_INFO_NAND \
 409         "dfu_alt_info_nand=" \
 410         "SPL part 0 1;" \
 411         "SPL.backup1 part 0 2;" \
 412         "SPL.backup2 part 0 3;" \
 413         "SPL.backup3 part 0 4;" \
 414         "u-boot part 0 5;" \
 415         "u-boot-spl-os part 0 6;" \
 416         "kernel part 0 8;" \
 417         "rootfs part 0 9\0"
 418 #else
 419 #define DFU_ALT_INFO_NAND ""
 420 #endif
 421 #define DFU_ALT_INFO_RAM \
 422         "dfu_alt_info_ram=" \
 423         "kernel ram 0x80200000 0xD80000;" \
 424         "fdt ram 0x80F80000 0x80000;" \
 425         "ramdisk ram 0x81000000 0x4000000\0"
 426 #define DFUARGS \
 427         "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
 428         DFU_ALT_INFO_MMC \
 429         DFU_ALT_INFO_RAM \
 430         DFU_ALT_INFO_NAND
 431 #endif
 432
 433 /*
 434  * Default to using SPI for environment, etc.
 435  * 0x000000 - 0x020000 : SPL (128KiB)
 436  * 0x020000 - 0x0A0000 : U-Boot (512KiB)
 437  * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
 438  * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
 439  * 0x0E0000 - 0x442000 : Linux Kernel
 440  * 0x442000 - 0x800000 : Userland
 441  */
 442 #if defined(CONFIG_SPI_BOOT)
 443 /* SPL related */
 444 #elif defined(CONFIG_EMMC_BOOT)
 445 #define CONFIG_SYS_MMC_ENV_DEV          1
 446 #define CONFIG_SYS_MMC_ENV_PART         2
 447 #endif
 448
 449 /* SPI flash. */
 450
 451 /* Network. */
 452 #define CONFIG_PHY_SMSC
 453
 454 /*
 455  * NOR Size = 16 MiB
 456  * Number of Sectors/Blocks = 128
 457  * Sector Size = 128 KiB
 458  * Word length = 16 bits
 459  * Default layout:
 460  * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
 461  * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
 462  * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
 463  * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
 464  * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
 465  */
 466 #if defined(CONFIG_NOR)
 467 #define CONFIG_SYS_MAX_FLASH_SECT       128
 468 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 469 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
 470 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 471 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 472 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 473 /* Reduce SPL size by removing unlikey targets */
 474 #endif  /* NOR support */
 475
 476 #endif  /* ! __CONFIG_AM335X_EVM_H */