include/configs/axs10x.h

   1 /*
   2  * Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_AXS10X_H_
   8 #define _CONFIG_AXS10X_H_
   9
  10 #include <linux/sizes.h>
  11 /*
  12  *  CPU configuration
  13  */
  14 #define CONFIG_SYS_TIMER_RATE           CONFIG_SYS_CLK_FREQ
  15
  16 #define ARC_FPGA_PERIPHERAL_BASE        0xE0000000
  17 #define ARC_APB_PERIPHERAL_BASE         0xF0000000
  18 #define ARC_DWMMC_BASE                  (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
  19 #define ARC_DWGMAC_BASE                 (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
  20
  21 /*
  22  * Memory configuration
  23  */
  24 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
  25
  26 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  27 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  28 #define CONFIG_SYS_SDRAM_SIZE           SZ_512M
  29
  30 #define CONFIG_SYS_INIT_SP_ADDR         \
  31         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
  32
  33 #define CONFIG_SYS_MALLOC_LEN           SZ_2M
  34 #define CONFIG_SYS_BOOTM_LEN            SZ_32M
  35 #define CONFIG_SYS_LOAD_ADDR            0x82000000
  36
  37 /*
  38  * This board might be of different versions so handle it
  39  */
  40 #define CONFIG_BOARD_TYPES
  41 #define CONFIG_BOARD_EARLY_INIT_F
  42
  43 /*
  44  * NAND Flash configuration
  45  */
  46 #define CONFIG_SYS_NO_FLASH
  47 #define CONFIG_SYS_NAND_BASE            (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
  48 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  49
  50 /*
  51  * UART configuration
  52  */
  53 #define CONFIG_DW_SERIAL
  54 #define CONFIG_SYS_NS16550_SERIAL
  55 #define CONFIG_SYS_NS16550_CLK          33333333
  56 #define CONFIG_SYS_NS16550_MEM32
  57 #define CONFIG_BAUDRATE                 115200
  58
  59 /*
  60  * I2C configuration
  61  */
  62 #define CONFIG_SYS_I2C
  63 #define CONFIG_I2C_ENV_EEPROM_BUS       2
  64 #define CONFIG_SYS_I2C_SPEED            100000
  65 #define CONFIG_SYS_I2C_SPEED1           100000
  66 #define CONFIG_SYS_I2C_SPEED2           100000
  67 #define CONFIG_SYS_I2C_SLAVE            0
  68 #define CONFIG_SYS_I2C_SLAVE1           0
  69 #define CONFIG_SYS_I2C_SLAVE2           0
  70 #define CONFIG_SYS_I2C_BASE             0xE001D000
  71 #define CONFIG_SYS_I2C_BASE1            0xE001E000
  72 #define CONFIG_SYS_I2C_BASE2            0xE001F000
  73 #define CONFIG_SYS_I2C_BUS_MAX          3
  74 #define IC_CLK                          50
  75
  76 /*
  77  * EEPROM configuration
  78  */
  79 #define CONFIG_SYS_I2C_EEPROM_ADDR              (0xA8 >> 1)
  80 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
  81 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW     1
  82 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
  83 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   64
  84
  85 /*
  86  * SD/MMC configuration
  87  */
  88 #define CONFIG_GENERIC_MMC
  89 #define CONFIG_DOS_PARTITION
  90
  91 /*
  92  * Ethernet PHY configuration
  93  */
  94 #define CONFIG_MII
  95 #define CONFIG_PHY_GIGE
  96
  97 /*
  98  * USB 1.1 configuration
  99  */
 100 #define CONFIG_USB_OHCI_NEW
 101 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 102
 103 /*
 104  * Commands still not supported in Kconfig
 105  */
 106 #define CONFIG_CMD_NAND
 107
 108 #define CONFIG_AUTO_COMPLETE
 109 #define CONFIG_SYS_MAXARGS              16
 110
 111 /*
 112  * Environment settings
 113  */
 114 #define CONFIG_ENV_IS_IN_EEPROM
 115 #define CONFIG_ENV_SIZE                 SZ_512
 116 #define CONFIG_ENV_OFFSET               0
 117
 118 /*
 119  * Environment configuration
 120  */
 121 #define CONFIG_BOOTFILE                 "uImage"
 122 #define CONFIG_BOOTARGS                 "console=ttyS3,115200n8"
 123 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
 124
 125 /*
 126  * Console configuration
 127  */
 128 #define CONFIG_SYS_LONGHELP
 129 #define CONFIG_SYS_CBSIZE               SZ_256
 130 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 131 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 132                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 133
 134 /*
 135  * Misc utility configuration
 136  */
 137 #define CONFIG_BOUNCE_BUFFER
 138
 139 #endif /* _CONFIG_AXS10X_H_ */