2 * Copyright (C) 2006 Atmel Corporation
4 * Configuration settings for the AVR32 Network Gateway
6 * SPDX-License-Identifier: GPL-2.0+
11 #include <asm/arch/hardware.h>
14 #define CONFIG_AT32AP7000
15 #define CONFIG_ATNGW100
17 #define CONFIG_BOARD_EARLY_INIT_F
18 #define CONFIG_BOARD_EARLY_INIT_R
21 * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
22 * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
23 * and the PBA bus to run at 1/4 the PLL frequency.
26 #define CONFIG_SYS_POWER_MANAGER
27 #define CONFIG_SYS_OSC0_HZ 20000000
28 #define CONFIG_SYS_PLL0_DIV 1
29 #define CONFIG_SYS_PLL0_MUL 7
30 #define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16
31 #define CONFIG_SYS_CLKDIV_CPU 0
32 #define CONFIG_SYS_CLKDIV_HSB 1
33 #define CONFIG_SYS_CLKDIV_PBA 2
34 #define CONFIG_SYS_CLKDIV_PBB 1
36 /* Reserve VM regions for SDRAM and NOR flash */
37 #define CONFIG_SYS_NR_VM_REGIONS 2
40 * The PLLOPT register controls the PLL like this:
44 * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
46 #define CONFIG_SYS_PLL0_OPT 0x04
48 #define CONFIG_USART_BASE ATMEL_BASE_USART1
49 #define CONFIG_USART_ID 1
50 /* User serviceable stuff */
51 #define CONFIG_DOS_PARTITION
53 #define CONFIG_CMDLINE_TAG
54 #define CONFIG_SETUP_MEMORY_TAGS
55 #define CONFIG_INITRD_TAG
57 #define CONFIG_STACKSIZE (2048)
59 #define CONFIG_BAUDRATE 115200
60 #define CONFIG_BOOTARGS \
61 "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
62 #define CONFIG_BOOTCOMMAND \
65 #define CONFIG_BOOTDELAY 1
68 * After booting the board for the first time, new ethernet addresses
69 * should be generated and assigned to the environment variables
70 * "ethaddr" and "eth1addr". This is normally done during production.
72 #define CONFIG_OVERWRITE_ETHADDR_ONCE
77 #define CONFIG_BOOTP_SUBNETMASK
78 #define CONFIG_BOOTP_GATEWAY
81 * Command line configuration.
83 #define CONFIG_CMD_ASKENV
84 #define CONFIG_CMD_DHCP
85 #define CONFIG_CMD_EXT2
86 #define CONFIG_CMD_FAT
87 #define CONFIG_CMD_JFFS2
88 #define CONFIG_CMD_MMC
90 #define CONFIG_CMD_SPI
93 #define CONFIG_ATMEL_USART
95 #define CONFIG_PORTMUX_PIO
96 #define CONFIG_SYS_NR_PIOS 5
97 #define CONFIG_SYS_HSDRAMC
99 #define CONFIG_GENERIC_ATMEL_MCI
100 #define CONFIG_GENERIC_MMC
101 #define CONFIG_ATMEL_SPI
104 #define CONFIG_SYS_DCACHE_LINESZ 32
105 #define CONFIG_SYS_ICACHE_LINESZ 32
107 #define CONFIG_NR_DRAM_BANKS 1
109 #define CONFIG_SYS_FLASH_CFI
110 #define CONFIG_FLASH_CFI_DRIVER
112 #define CONFIG_SYS_FLASH_BASE 0x00000000
113 #define CONFIG_SYS_FLASH_SIZE 0x800000
114 #define CONFIG_SYS_MAX_FLASH_BANKS 1
115 #define CONFIG_SYS_MAX_FLASH_SECT 135
117 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
118 #define CONFIG_SYS_TEXT_BASE 0x00000000
120 #define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
121 #define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
122 #define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
124 #define CONFIG_ENV_IS_IN_FLASH
125 #define CONFIG_ENV_SIZE 65536
126 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
128 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
130 #define CONFIG_SYS_MALLOC_LEN (256*1024)
132 /* Allow 4MB for the kernel run-time image */
133 #define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
134 #define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
136 /* Other configuration settings that shouldn't have to change all that often */
137 #define CONFIG_SYS_CBSIZE 256
138 #define CONFIG_SYS_MAXARGS 16
139 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
140 #define CONFIG_SYS_LONGHELP
142 #define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
143 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)
145 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
147 #endif /* __CONFIG_H */