include/configs/at91sam9x5ek.h

   1 /*
   2  * Copyright (C) 2012 Atmel Corporation
   3  *
   4  * Configuation settings for the AT91SAM9X5EK board.
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #ifndef __CONFIG_H__
  26 #define __CONFIG_H__
  27
  28 #include <asm/hardware.h>
  29
  30 /* ARM asynchronous clock */
  31 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  32 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  33 #define CONFIG_SYS_HZ                   1000
  34
  35 #define CONFIG_AT91SAM9X5EK
  36 #define CONFIG_AT91FAMILY
  37
  38 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  39 #define CONFIG_SETUP_MEMORY_TAGS
  40 #define CONFIG_INITRD_TAG
  41 #define CONFIG_SKIP_LOWLEVEL_INIT
  42 #define CONFIG_BOARD_EARLY_INIT_F
  43 #define CONFIG_DISPLAY_CPUINFO
  44
  45 #define CONFIG_OF_LIBFDT
  46
  47 /* general purpose I/O */
  48 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  49 #define CONFIG_AT91_GPIO
  50
  51 /* serial console */
  52 #define CONFIG_ATMEL_USART
  53 #define CONFIG_USART_BASE       ATMEL_BASE_DBGU
  54 #define CONFIG_USART_ID         ATMEL_ID_SYS
  55
  56 /* LCD */
  57 #define CONFIG_LCD
  58 #define LCD_BPP                 LCD_COLOR16
  59 #define LCD_OUTPUT_BPP          24
  60 #define CONFIG_LCD_LOGO
  61 #undef LCD_TEST_PATTERN
  62 #define CONFIG_LCD_INFO
  63 #define CONFIG_LCD_INFO_BELOW_LOGO
  64 #define CONFIG_SYS_WHITE_ON_BLACK
  65 #define CONFIG_ATMEL_HLCD
  66 #define CONFIG_ATMEL_LCD_RGB565
  67 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  68
  69 #define CONFIG_BOOTDELAY        3
  70
  71 /*
  72  * BOOTP options
  73  */
  74 #define CONFIG_BOOTP_BOOTFILESIZE
  75 #define CONFIG_BOOTP_BOOTPATH
  76 #define CONFIG_BOOTP_GATEWAY
  77 #define CONFIG_BOOTP_HOSTNAME
  78
  79 /*
  80  * Command line configuration.
  81  */
  82 #include <config_cmd_default.h>
  83 #undef CONFIG_CMD_FPGA
  84 #undef CONFIG_CMD_IMI
  85 #undef CONFIG_CMD_IMLS
  86 #undef CONFIG_CMD_LOADS
  87
  88 #define CONFIG_CMD_PING
  89 #define CONFIG_CMD_DHCP
  90 #define CONFIG_CMD_NAND
  91 #define CONFIG_CMD_SF
  92 #define CONFIG_CMD_MMC
  93 #define CONFIG_CMD_FAT
  94 #define CONFIG_CMD_USB
  95
  96 /*
  97  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
  98  * NB: in this case, USB 1.1 devices won't be recognized.
  99  */
 100
 101
 102 /* SDRAM */
 103 #define CONFIG_NR_DRAM_BANKS            1
 104 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 105 #define CONFIG_SYS_SDRAM_SIZE           0x08000000      /* 128 megs */
 106
 107 #define CONFIG_SYS_INIT_SP_ADDR \
 108         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
 109
 110 /* DataFlash */
 111 #ifdef CONFIG_CMD_SF
 112 #define CONFIG_ATMEL_SPI
 113 #define CONFIG_SPI_FLASH
 114 #define CONFIG_SPI_FLASH_ATMEL
 115 #define CONFIG_SF_DEFAULT_SPEED         30000000
 116 #endif
 117
 118 /* no NOR flash */
 119 #define CONFIG_SYS_NO_FLASH
 120
 121 /* NAND flash */
 122 #ifdef CONFIG_CMD_NAND
 123 #define CONFIG_NAND_ATMEL
 124 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 125 #define CONFIG_SYS_NAND_BASE            0x40000000
 126 #define CONFIG_SYS_NAND_DBW_8           1
 127 /* our ALE is AD21 */
 128 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
 129 /* our CLE is AD22 */
 130 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 131 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD4
 132 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PD5
 133
 134 /* PMECC & PMERRLOC */
 135 #define CONFIG_ATMEL_NAND_HWECC         1
 136 #define CONFIG_ATMEL_NAND_HW_PMECC      1
 137 #define CONFIG_PMECC_CAP                2
 138 #define CONFIG_PMECC_SECTOR_SIZE        512
 139 #define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
 140
 141 #define CONFIG_MTD_DEVICE
 142 #define CONFIG_CMD_MTDPARTS
 143 #define CONFIG_MTD_PARTITIONS
 144 #define CONFIG_RBTREE
 145 #define CONFIG_LZO
 146 #define CONFIG_CMD_UBI
 147 #define CONFIG_CMD_UBIFS
 148 #endif
 149
 150 /* MMC */
 151 #ifdef CONFIG_CMD_MMC
 152 #define CONFIG_MMC
 153 #define CONFIG_GENERIC_MMC
 154 #define CONFIG_GENERIC_ATMEL_MCI
 155 #endif
 156
 157 /* FAT */
 158 #ifdef CONFIG_CMD_FAT
 159 #define CONFIG_DOS_PARTITION
 160 #endif
 161
 162 /* Ethernet */
 163 #define CONFIG_MACB
 164 #define CONFIG_RMII
 165 #define CONFIG_NET_RETRY_COUNT          20
 166 #define CONFIG_MACB_SEARCH_PHY
 167
 168 /* USB */
 169 #ifdef CONFIG_CMD_USB
 170 #ifdef CONFIG_USB_EHCI
 171 #define CONFIG_USB_EHCI_ATMEL
 172 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
 173 #else
 174 #define CONFIG_USB_OHCI_NEW
 175 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 176 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
 177 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9x5"
 178 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
 179 #endif
 180 #define CONFIG_USB_ATMEL
 181 #define CONFIG_USB_STORAGE
 182 #endif
 183
 184 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
 185
 186 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 187 #define CONFIG_SYS_MEMTEST_END          0x26e00000
 188
 189 #ifdef CONFIG_SYS_USE_NANDFLASH
 190 /* bootstrap + u-boot + env + linux in nandflash */
 191 #define CONFIG_ENV_IS_IN_NAND
 192 #define CONFIG_ENV_OFFSET               0xc0000
 193 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 194 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 195 #define CONFIG_BOOTCOMMAND      "nand read " \
 196                                 "0x22000000 0x200000 0x300000; " \
 197                                 "bootm 0x22000000"
 198 #elif defined(CONFIG_SYS_USE_SPIFLASH)
 199 /* bootstrap + u-boot + env + linux in spi flash */
 200 #define CONFIG_ENV_IS_IN_SPI_FLASH
 201 #define CONFIG_ENV_OFFSET       0x5000
 202 #define CONFIG_ENV_SIZE         0x3000
 203 #define CONFIG_ENV_SECT_SIZE    0x1000
 204 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 205 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 206                                 "sf read 0x22000000 0x100000 0x300000; " \
 207                                 "bootm 0x22000000"
 208 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 209 /* bootstrap + u-boot + env + linux in data flash */
 210 #define CONFIG_ENV_IS_IN_SPI_FLASH
 211 #define CONFIG_ENV_OFFSET       0x4200
 212 #define CONFIG_ENV_SIZE         0x4200
 213 #define CONFIG_ENV_SECT_SIZE    0x210
 214 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 215 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 216                                 "sf read 0x22000000 0x84000 0x294000; " \
 217                                 "bootm 0x22000000"
 218 #else /* CONFIG_SYS_USE_MMC */
 219 /* bootstrap + u-boot + env + linux in mmc */
 220 #define CONFIG_ENV_IS_IN_MMC
 221 /* For FAT system, most cases it should be in the reserved sector */
 222 #define CONFIG_ENV_OFFSET       0x2000
 223 #define CONFIG_ENV_SIZE         0x1000
 224 #define CONFIG_SYS_MMC_ENV_DEV  0
 225 #endif
 226
 227 #ifdef CONFIG_SYS_USE_MMC
 228 #define CONFIG_BOOTARGS         "mem=128M console=ttyS0,115200 " \
 229                                 "mtdparts=atmel_nand:" \
 230                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 231                                 "root=/dev/mmcblk0p2 " \
 232                                 "rw rootfstype=ext4 rootwait"
 233 #else
 234 #define CONFIG_BOOTARGS         "mem=128M console=ttyS0,115200 " \
 235                                 "mtdparts=atmel_nand:" \
 236                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 237                                 "root=/dev/mtdblock1 rw " \
 238                                 "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"
 239 #endif
 240
 241 #define CONFIG_BAUDRATE         115200
 242
 243 #define CONFIG_SYS_PROMPT       "U-Boot> "
 244 #define CONFIG_SYS_CBSIZE       256
 245 #define CONFIG_SYS_MAXARGS      16
 246 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
 247                                         + 16)
 248 #define CONFIG_SYS_LONGHELP
 249 #define CONFIG_CMDLINE_EDITING
 250 #define CONFIG_AUTO_COMPLETE
 251 #define CONFIG_SYS_HUSH_PARSER
 252
 253 /*
 254  * Size of malloc() pool
 255  */
 256 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024 + 0x1000)
 257
 258 #ifdef CONFIG_USE_IRQ
 259 #error CONFIG_USE_IRQ not supported
 260 #endif
 261
 262 #endif