x86: baytrail: Add all IDE/SATA PCI device IDs
[platform/kernel/u-boot.git] / include / configs / at91sam9rlek.h
1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian@popies.net>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * Configuation settings for the AT91SAM9RLEK board.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #include <asm/hardware.h>
15
16 #define CONFIG_SYS_TEXT_BASE            0x21F00000
17
18 /* ARM asynchronous clock */
19 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
20 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* main clock xtal */
21
22 #define CONFIG_AT91SAM9RLEK             1       /* It's an AT91SAM9RLEK Board */
23
24 #define CONFIG_ARCH_CPU_INIT
25 #define CONFIG_SKIP_LOWLEVEL_INIT
26 #define CONFIG_BOARD_EARLY_INIT_F
27
28 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
29 #define CONFIG_SETUP_MEMORY_TAGS        1
30 #define CONFIG_INITRD_TAG               1
31
32 #define CONFIG_DISPLAY_CPUINFO
33
34 #define CONFIG_CMD_BOOTZ
35 #define CONFIG_OF_LIBFDT
36
37 #define CONFIG_SYS_GENERIC_BOARD
38
39 #define CONFIG_ATMEL_LEGACY
40 #define CONFIG_AT91_GPIO                1
41 #define CONFIG_AT91_GPIO_PULLUP         1
42
43 /*
44  * Hardware drivers
45  */
46
47 /* serial console */
48 #define CONFIG_ATMEL_USART
49 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
50 #define CONFIG_USART_ID                 ATMEL_ID_SYS
51 #define CONFIG_BAUDRATE                 115200
52
53 /* LCD */
54 #define CONFIG_LCD                      1
55 #define LCD_BPP                         LCD_COLOR8
56 #define CONFIG_LCD_LOGO                 1
57 #undef LCD_TEST_PATTERN
58 #define CONFIG_LCD_INFO                 1
59 #define CONFIG_LCD_INFO_BELOW_LOGO      1
60 #define CONFIG_SYS_WHITE_ON_BLACK       1
61 #define CONFIG_ATMEL_LCD                1
62 #define CONFIG_ATMEL_LCD_RGB565         1
63 /* Let board_init_f handle the framebuffer allocation */
64 #undef CONFIG_FB_ADDR
65 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
66
67
68 /* LED */
69 #define CONFIG_AT91_LED
70 #define CONFIG_RED_LED          AT91_PIN_PD14   /* this is the power led */
71 #define CONFIG_GREEN_LED        AT91_PIN_PD15   /* this is the user1 led */
72 #define CONFIG_YELLOW_LED       AT91_PIN_PD16   /* this is the user2 led */
73
74 #define CONFIG_BOOTDELAY        3
75
76 /*
77  * Command line configuration.
78  */
79 #undef CONFIG_CMD_USB
80
81 #define CONFIG_CMD_NAND                 1
82
83 /* SDRAM */
84 #define CONFIG_NR_DRAM_BANKS            1
85 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
86 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
87
88 #define CONFIG_SYS_INIT_SP_ADDR \
89         (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
90
91 /* DataFlash */
92 #define CONFIG_ATMEL_DATAFLASH_SPI
93 #define CONFIG_HAS_DATAFLASH                    1
94 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          1
95 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
96 #define AT91_SPI_CLK                            15000000
97 #define DATAFLASH_TCSS                          (0x1a << 16)
98 #define DATAFLASH_TCHS                          (0x1 << 24)
99
100 /* NOR flash - not present */
101 #define CONFIG_SYS_NO_FLASH                     1
102
103 /* NAND flash */
104 #ifdef CONFIG_CMD_NAND
105 #define CONFIG_NAND_ATMEL
106 #define CONFIG_SYS_MAX_NAND_DEVICE              1
107 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
108 #define CONFIG_SYS_NAND_DBW_8                   1
109 /* our ALE is AD21 */
110 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
111 /* our CLE is AD22 */
112 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
113 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PB6
114 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PD17
115
116 #endif
117
118 /* MMC */
119 #define CONFIG_CMD_MMC
120
121 #ifdef CONFIG_CMD_MMC
122 #define CONFIG_MMC
123 #define CONFIG_GENERIC_MMC
124 #define CONFIG_GENERIC_ATMEL_MCI
125 #define CONFIG_CMD_FAT
126 #define CONFIG_DOS_PARTITION
127 #endif
128
129 /* Ethernet - not present */
130
131 /* USB - not supported */
132
133 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
134
135 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
136 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
137
138 #ifdef CONFIG_SYS_USE_DATAFLASH
139
140 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
141 #define CONFIG_ENV_IS_IN_DATAFLASH      1
142 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
143 #define CONFIG_ENV_OFFSET               0x4200
144 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
145 #define CONFIG_ENV_SIZE         0x4200
146 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0084000 0x22000000 0x210000; bootm"
147 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
148                                 "root=/dev/mtdblock0 " \
149                                 "mtdparts=atmel_nand:-(root) "\
150                                 "rw rootfstype=jffs2"
151
152 #elif CONFIG_SYS_USE_NANDFLASH
153
154 /* bootstrap + u-boot + env + linux in nandflash */
155 #define CONFIG_ENV_IS_IN_NAND           1
156 #define CONFIG_ENV_OFFSET               0xc0000
157 #define CONFIG_ENV_OFFSET_REDUND        0x100000
158 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
159 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x600000; "      \
160                                 "nand read 0x21000000 0x180000 0x80000; "       \
161                                 "bootz 0x22000000 - 0x21000000"
162 #define CONFIG_BOOTARGS         \
163                                 "console=ttyS0,115200 earlyprintk "                             \
164                                 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
165                                 "256K(env),256k(env_redundent),256k(spare),"                    \
166                                 "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
167                                 "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
168
169 #else /* CONFIG_SYS_USE_MMC */
170
171 /* bootstrap + u-boot + env + linux in mmc */
172 #define CONFIG_ENV_IS_IN_FAT
173 #define CONFIG_FAT_WRITE
174 #define FAT_ENV_INTERFACE       "mmc"
175 #define FAT_ENV_FILE            "uboot.env"
176 #define FAT_ENV_DEVICE_AND_PART "0"
177 #define CONFIG_ENV_SIZE         0x4000
178 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
179                                 "fatload mmc 0:1 0x22000000 zImage; " \
180                                 "bootz 0x22000000 - 0x21000000"
181 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
182                                 "mtdparts=atmel_nand:" \
183                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
184                                 "root=/dev/mmcblk0p2 rw rootwait"
185 #endif
186
187 #define CONFIG_SYS_CBSIZE               256
188 #define CONFIG_SYS_MAXARGS              16
189 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
190 #define CONFIG_SYS_LONGHELP             1
191 #define CONFIG_CMDLINE_EDITING          1
192 #define CONFIG_AUTO_COMPLETE
193
194 /*
195  * Size of malloc() pool
196  */
197 #define CONFIG_SYS_MALLOC_LEN   ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
198
199 #endif