include/configs/at91sam9rlek.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian@popies.net>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * Configuation settings for the AT91SAM9RLEK board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #include <asm/hardware.h>
  15
  16 #define CONFIG_SYS_TEXT_BASE            0x21F00000
  17
  18 /* ARM asynchronous clock */
  19 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  20 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* main clock xtal */
  21
  22 #define CONFIG_AT91SAM9RLEK             1       /* It's an AT91SAM9RLEK Board */
  23
  24 #define CONFIG_ARCH_CPU_INIT
  25 #define CONFIG_SKIP_LOWLEVEL_INIT
  26 #define CONFIG_BOARD_EARLY_INIT_F
  27
  28 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  29 #define CONFIG_SETUP_MEMORY_TAGS        1
  30 #define CONFIG_INITRD_TAG               1
  31
  32 #define CONFIG_DISPLAY_CPUINFO
  33
  34 #define CONFIG_CMD_BOOTZ
  35 #define CONFIG_OF_LIBFDT
  36
  37 #define CONFIG_SYS_GENERIC_BOARD
  38
  39 #define CONFIG_ATMEL_LEGACY
  40 #define CONFIG_AT91_GPIO                1
  41 #define CONFIG_AT91_GPIO_PULLUP         1
  42
  43 /*
  44  * Hardware drivers
  45  */
  46
  47 /* serial console */
  48 #define CONFIG_ATMEL_USART
  49 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  50 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  51 #define CONFIG_BAUDRATE                 115200
  52
  53 /* LCD */
  54 #define CONFIG_LCD                      1
  55 #define LCD_BPP                         LCD_COLOR8
  56 #define CONFIG_LCD_LOGO                 1
  57 #undef LCD_TEST_PATTERN
  58 #define CONFIG_LCD_INFO                 1
  59 #define CONFIG_LCD_INFO_BELOW_LOGO      1
  60 #define CONFIG_SYS_WHITE_ON_BLACK       1
  61 #define CONFIG_ATMEL_LCD                1
  62 #define CONFIG_ATMEL_LCD_RGB565         1
  63 /* Let board_init_f handle the framebuffer allocation */
  64 #undef CONFIG_FB_ADDR
  65 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  66
  67
  68 /* LED */
  69 #define CONFIG_AT91_LED
  70 #define CONFIG_RED_LED          AT91_PIN_PD14   /* this is the power led */
  71 #define CONFIG_GREEN_LED        AT91_PIN_PD15   /* this is the user1 led */
  72 #define CONFIG_YELLOW_LED       AT91_PIN_PD16   /* this is the user2 led */
  73
  74 #define CONFIG_BOOTDELAY        3
  75
  76 /*
  77  * Command line configuration.
  78  */
  79 #include <config_cmd_default.h>
  80 #undef CONFIG_CMD_BDI
  81 #undef CONFIG_CMD_FPGA
  82 #undef CONFIG_CMD_IMI
  83 #undef CONFIG_CMD_IMLS
  84 #undef CONFIG_CMD_LOADS
  85 #undef CONFIG_CMD_NET
  86 #undef CONFIG_CMD_NFS
  87 #undef CONFIG_CMD_SOURCE
  88 #undef CONFIG_CMD_USB
  89
  90 #define CONFIG_CMD_NAND                 1
  91
  92 /* SDRAM */
  93 #define CONFIG_NR_DRAM_BANKS            1
  94 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
  95 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
  96
  97 #define CONFIG_SYS_INIT_SP_ADDR \
  98         (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
  99
 100 /* DataFlash */
 101 #define CONFIG_ATMEL_DATAFLASH_SPI
 102 #define CONFIG_HAS_DATAFLASH                    1
 103 #define CONFIG_SYS_SPI_WRITE_TOUT               (5*CONFIG_SYS_HZ)
 104 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          1
 105 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
 106 #define AT91_SPI_CLK                            15000000
 107 #define DATAFLASH_TCSS                          (0x1a << 16)
 108 #define DATAFLASH_TCHS                          (0x1 << 24)
 109
 110 /* NOR flash - not present */
 111 #define CONFIG_SYS_NO_FLASH                     1
 112
 113 /* NAND flash */
 114 #ifdef CONFIG_CMD_NAND
 115 #define CONFIG_NAND_ATMEL
 116 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 117 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
 118 #define CONFIG_SYS_NAND_DBW_8                   1
 119 /* our ALE is AD21 */
 120 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
 121 /* our CLE is AD22 */
 122 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
 123 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PB6
 124 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PD17
 125
 126 #endif
 127
 128 /* Ethernet - not present */
 129
 130 /* USB - not supported */
 131
 132 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
 133
 134 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
 135 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 136
 137 #ifdef CONFIG_SYS_USE_DATAFLASH
 138
 139 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
 140 #define CONFIG_ENV_IS_IN_DATAFLASH      1
 141 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 142 #define CONFIG_ENV_OFFSET               0x4200
 143 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
 144 #define CONFIG_ENV_SIZE         0x4200
 145 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0084000 0x22000000 0x210000; bootm"
 146 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
 147                                 "root=/dev/mtdblock0 " \
 148                                 "mtdparts=atmel_nand:-(root) "\
 149                                 "rw rootfstype=jffs2"
 150
 151 #else /* CONFIG_SYS_USE_NANDFLASH */
 152
 153 /* bootstrap + u-boot + env + linux in nandflash */
 154 #define CONFIG_ENV_IS_IN_NAND           1
 155 #define CONFIG_ENV_OFFSET               0x60000
 156 #define CONFIG_ENV_OFFSET_REDUND        0x80000
 157 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 158 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
 159 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
 160                                 "root=/dev/mtdblock5 " \
 161                                 "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
 162                                 "rw rootfstype=jffs2"
 163
 164 #endif
 165
 166 #define CONFIG_SYS_PROMPT               "U-Boot> "
 167 #define CONFIG_SYS_CBSIZE               256
 168 #define CONFIG_SYS_MAXARGS              16
 169 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 170 #define CONFIG_SYS_LONGHELP             1
 171 #define CONFIG_CMDLINE_EDITING          1
 172 #define CONFIG_AUTO_COMPLETE
 173
 174 /*
 175  * Size of malloc() pool
 176  */
 177 #define CONFIG_SYS_MALLOC_LEN   ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 178
 179 #endif