cmd: Kconfig: Move CONFIG_MP to Kconfig
[platform/kernel/u-boot.git] / include / configs / at91sam9rlek.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2007-2008
4  * Stelian Pop <stelian@popies.net>
5  * Lead Tech Design <www.leadtechdesign.com>
6  *
7  * Configuation settings for the AT91SAM9RLEK board.
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #include <asm/hardware.h>
14
15 /* ARM asynchronous clock */
16 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
17 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* main clock xtal */
18
19 #define CONFIG_ARCH_CPU_INIT
20 #define CONFIG_SKIP_LOWLEVEL_INIT
21
22 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
23 #define CONFIG_SETUP_MEMORY_TAGS        1
24 #define CONFIG_INITRD_TAG               1
25
26 #define CONFIG_ATMEL_LEGACY
27
28 /*
29  * Hardware drivers
30  */
31
32 /* LCD */
33 #define LCD_BPP                         LCD_COLOR8
34 #define CONFIG_LCD_LOGO                 1
35 #undef LCD_TEST_PATTERN
36 #define CONFIG_LCD_INFO                 1
37 #define CONFIG_LCD_INFO_BELOW_LOGO      1
38 #define CONFIG_ATMEL_LCD                1
39 #define CONFIG_ATMEL_LCD_RGB565         1
40 /* Let board_init_f handle the framebuffer allocation */
41 #undef CONFIG_FB_ADDR
42
43 /* SDRAM */
44 #define CONFIG_NR_DRAM_BANKS            1
45 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
46 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
47
48 #define CONFIG_SYS_INIT_SP_ADDR \
49         (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
50
51 /* NAND flash */
52 #ifdef CONFIG_CMD_NAND
53 #define CONFIG_NAND_ATMEL
54 #define CONFIG_SYS_MAX_NAND_DEVICE              1
55 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
56 #define CONFIG_SYS_NAND_DBW_8                   1
57 /* our ALE is AD21 */
58 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
59 /* our CLE is AD22 */
60 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
61 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PB6
62 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PD17
63
64 #endif
65
66 /* Ethernet - not present */
67
68 /* USB - not supported */
69
70 #define CONFIG_SYS_LOAD_ADDR                    0x22000000      /* load address */
71
72 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
73 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
74
75 #ifdef CONFIG_SYS_USE_DATAFLASH
76
77 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
78 #define CONFIG_ENV_OFFSET       0x4200
79 #define CONFIG_ENV_SIZE         0x4200
80 #define CONFIG_ENV_SECT_SIZE    0x210
81 #define CONFIG_ENV_SPI_MAX_HZ   15000000
82 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
83                                 "sf read 0x22000000 0x84000 0x294000; " \
84                                 "bootm 0x22000000"
85
86 #elif CONFIG_SYS_USE_NANDFLASH
87
88 /* bootstrap + u-boot + env + linux in nandflash */
89 #define CONFIG_ENV_OFFSET               0x140000
90 #define CONFIG_ENV_OFFSET_REDUND        0x100000
91 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
92 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x600000; "      \
93                                 "nand read 0x21000000 0x180000 0x80000; "       \
94                                 "bootz 0x22000000 - 0x21000000"
95
96 #else /* CONFIG_SYS_USE_MMC */
97
98 /* bootstrap + u-boot + env + linux in mmc */
99 #define CONFIG_ENV_SIZE         0x4000
100 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
101                                 "fatload mmc 0:1 0x22000000 zImage; " \
102                                 "bootz 0x22000000 - 0x21000000"
103 #endif
104
105 /*
106  * Size of malloc() pool
107  */
108 #define CONFIG_SYS_MALLOC_LEN   ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
109
110 #endif