include/configs/at91sam9n12ek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2013 Atmel Corporation.
   4  * Josh Wu <josh.wu@atmel.com>
   5  *
   6  * Configuation settings for the AT91SAM9N12-EK boards.
   7  */
   8
   9 #ifndef __AT91SAM9N12_CONFIG_H_
  10 #define __AT91SAM9N12_CONFIG_H_
  11
  12 /* ARM asynchronous clock */
  13 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  14 #define CONFIG_SYS_AT91_MAIN_CLOCK      16000000        /* main clock xtal */
  15
  16 /* Misc CPU related */
  17
  18 /* LCD */
  19 #define LCD_BPP                         LCD_COLOR16
  20 #define LCD_OUTPUT_BPP                  24
  21 #define CONFIG_LCD_LOGO
  22 #define CONFIG_LCD_INFO
  23 #define CONFIG_LCD_INFO_BELOW_LOGO
  24
  25 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  26 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
  27
  28 /*
  29  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
  30  * leaving the correct space for initial global data structure above
  31  * that address while providing maximum stack area below.
  32  */
  33 # define CONFIG_SYS_INIT_SP_ADDR \
  34         (0x00300000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
  35
  36 /* DataFlash */
  37
  38 /* NAND flash */
  39 #ifdef CONFIG_CMD_NAND
  40 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  41 #define CONFIG_SYS_NAND_BASE            0x40000000
  42 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  43 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  44 #define CONFIG_SYS_NAND_ENABLE_PIN      GPIO_PIN_PD(4)
  45 #define CONFIG_SYS_NAND_READY_PIN       GPIO_PIN_PD(5)
  46 #endif
  47
  48 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  49         "console=console=ttyS0,115200\0"                                \
  50         "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0"                                  \
  51         "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
  52         "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
  53
  54 /* USB host */
  55 #ifdef CONFIG_CMD_USB
  56 #define CONFIG_USB_ATMEL
  57 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
  58 #define CONFIG_USB_OHCI_NEW
  59 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  60 #define CONFIG_SYS_USB_OHCI_REGS_BASE   ATMEL_BASE_OHCI
  61 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "at91sam9n12"
  62 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      1
  63 #endif
  64
  65 #ifdef CONFIG_SPI_BOOT
  66
  67 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
  68
  69 #elif defined(CONFIG_NAND_BOOT)
  70
  71 /* bootstrap + u-boot + env + linux in nandflash */
  72 #endif
  73
  74 /* SPL */
  75 #define CONFIG_SPL_MAX_SIZE             0x6000
  76 #define CONFIG_SPL_STACK                0x308000
  77
  78 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
  79 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  80 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
  81 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
  82
  83 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
  84
  85 #define CONFIG_SYS_MASTER_CLOCK         132096000
  86 #define CONFIG_SYS_AT91_PLLA            0x20953f03
  87 #define CONFIG_SYS_MCKR                 0x1301
  88 #define CONFIG_SYS_MCKR_CSS             0x1302
  89
  90 #ifdef CONFIG_SD_BOOT
  91 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
  92 #endif
  93
  94 #endif