configs: Migrate CONFIG_SYS_TEXT_BASE
[platform/kernel/u-boot.git] / include / configs / at91sam9m10g45ek.h
1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian@popies.net>
4  * Lead Tech Design <www.leadtechdesign.com>
5  *
6  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
15
16 /* ARM asynchronous clock */
17 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
18 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
19
20 #define CONFIG_AT91SAM9M10G45EK
21
22 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs      */
23 #define CONFIG_SETUP_MEMORY_TAGS
24 #define CONFIG_INITRD_TAG
25 #define CONFIG_SKIP_LOWLEVEL_INIT
26
27 /* general purpose I/O */
28 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
29
30 /* LCD */
31 #define LCD_BPP                         LCD_COLOR8
32 #define CONFIG_LCD_LOGO
33 #undef LCD_TEST_PATTERN
34 #define CONFIG_LCD_INFO
35 #define CONFIG_LCD_INFO_BELOW_LOGO
36 #define CONFIG_ATMEL_LCD
37 #define CONFIG_ATMEL_LCD_RGB565
38 /* board specific(not enough SRAM) */
39 #define CONFIG_AT91SAM9G45_LCD_BASE             0x73E00000
40
41 /*
42  * BOOTP options
43  */
44 #define CONFIG_BOOTP_BOOTFILESIZE
45 #define CONFIG_BOOTP_BOOTPATH
46 #define CONFIG_BOOTP_GATEWAY
47 #define CONFIG_BOOTP_HOSTNAME
48
49 /* SDRAM */
50 #define CONFIG_NR_DRAM_BANKS            1
51 #define CONFIG_SYS_SDRAM_BASE           0x70000000
52 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
53
54 #define CONFIG_SYS_INIT_SP_ADDR \
55         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
56
57 /* NAND flash */
58 #ifdef CONFIG_CMD_NAND
59 #define CONFIG_NAND_ATMEL
60 #define CONFIG_SYS_MAX_NAND_DEVICE              1
61 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
62 #define CONFIG_SYS_NAND_DBW_8
63 /* our ALE is AD21 */
64 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
65 /* our CLE is AD22 */
66 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
67 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
68 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC8
69
70 #endif
71
72 /* Ethernet */
73 #define CONFIG_RESET_PHY_R
74 #define CONFIG_AT91_WANTS_COMMON_PHY
75
76 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
77
78 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
79 #define CONFIG_SYS_MEMTEST_END          0x23e00000
80
81 #ifdef CONFIG_NAND_BOOT
82 /* bootstrap + u-boot + env in nandflash */
83 #define CONFIG_ENV_OFFSET               0x120000
84 #define CONFIG_ENV_OFFSET_REDUND        0x100000
85 #define CONFIG_ENV_SIZE                 0x20000
86
87 #define CONFIG_BOOTCOMMAND                                              \
88         "nand read 0x70000000 0x200000 0x300000;"                       \
89         "bootm 0x70000000"
90 #elif CONFIG_SD_BOOT
91 /* bootstrap + u-boot + env + linux in mmc */
92 #define CONFIG_ENV_SIZE         0x4000
93
94 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x71000000 dtb; " \
95                                 "fatload mmc 0:1 0x72000000 zImage; " \
96                                 "bootz 0x72000000 - 0x71000000"
97 #endif
98
99 #define CONFIG_SYS_LONGHELP
100 #define CONFIG_CMDLINE_EDITING
101 #define CONFIG_AUTO_COMPLETE
102
103 /*
104  * Size of malloc() pool
105  */
106 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
107
108 /* Defines for SPL */
109 #define CONFIG_SPL_FRAMEWORK
110 #define CONFIG_SPL_TEXT_BASE            0x300000
111 #define CONFIG_SPL_MAX_SIZE             0x010000
112 #define CONFIG_SPL_STACK                0x310000
113
114 #define CONFIG_SYS_MONITOR_LEN          0x80000
115
116 #ifdef CONFIG_SD_BOOT
117
118 #define CONFIG_SPL_BSS_START_ADDR       0x70000000
119 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000
120 #define CONFIG_SYS_SPL_MALLOC_START     0x70080000
121 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00080000
122
123 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
124 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
125
126 #elif CONFIG_NAND_BOOT
127 #define CONFIG_SPL_NAND_DRIVERS
128 #define CONFIG_SPL_NAND_BASE
129 #define CONFIG_SPL_NAND_ECC
130 #define CONFIG_SPL_NAND_SOFTECC
131 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
132 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
133 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
134
135 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
136 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
137 #define CONFIG_SYS_NAND_PAGE_COUNT      64
138 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
139 #define CONFIG_SYS_NAND_ECCSIZE         256
140 #define CONFIG_SYS_NAND_ECCBYTES        3
141 #define CONFIG_SYS_NAND_OOBSIZE         64
142 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
143                                           48, 49, 50, 51, 52, 53, 54, 55, \
144                                           56, 57, 58, 59, 60, 61, 62, 63, }
145 #endif
146
147 #define CONFIG_SPL_ATMEL_SIZE
148 #define CONFIG_SYS_MASTER_CLOCK         132096000
149 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
150 #define CONFIG_SYS_MCKR                 0x1301
151 #define CONFIG_SYS_MCKR_CSS             0x1302
152
153 #endif