colibri_imx7: use splashcreen value instead of legacy function
[platform/kernel/u-boot.git] / include / configs / at91sam9m10g45ek.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2007-2008
4  * Stelian Pop <stelian@popies.net>
5  * Lead Tech Design <www.leadtechdesign.com>
6  *
7  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
8  */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
14
15 /* ARM asynchronous clock */
16 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
17 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
18
19 #define CONFIG_AT91SAM9M10G45EK
20
21 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs      */
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24 #define CONFIG_SKIP_LOWLEVEL_INIT
25
26 /* general purpose I/O */
27 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
28
29 /* LCD */
30 #define LCD_BPP                         LCD_COLOR8
31 #define CONFIG_LCD_LOGO
32 #undef LCD_TEST_PATTERN
33 #define CONFIG_LCD_INFO
34 #define CONFIG_LCD_INFO_BELOW_LOGO
35 #define CONFIG_ATMEL_LCD
36 #define CONFIG_ATMEL_LCD_RGB565
37 /* board specific(not enough SRAM) */
38 #define CONFIG_AT91SAM9G45_LCD_BASE             0x73E00000
39
40 /*
41  * BOOTP options
42  */
43 #define CONFIG_BOOTP_BOOTFILESIZE
44
45 /* SDRAM */
46 #define CONFIG_SYS_SDRAM_BASE           0x70000000
47 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
48
49 #define CONFIG_SYS_INIT_SP_ADDR \
50         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
51
52 /* NAND flash */
53 #ifdef CONFIG_CMD_NAND
54 #define CONFIG_SYS_MAX_NAND_DEVICE              1
55 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
56 #define CONFIG_SYS_NAND_DBW_8
57 /* our ALE is AD21 */
58 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
59 /* our CLE is AD22 */
60 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
61 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
62 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC8
63
64 #endif
65
66 /* Ethernet */
67 #define CONFIG_RESET_PHY_R
68 #define CONFIG_AT91_WANTS_COMMON_PHY
69
70 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
71
72 #ifdef CONFIG_NAND_BOOT
73 /* bootstrap + u-boot + env in nandflash */
74
75 #define CONFIG_BOOTCOMMAND                                              \
76         "nand read 0x70000000 0x200000 0x300000;"                       \
77         "bootm 0x70000000"
78 #elif CONFIG_SD_BOOT
79 /* bootstrap + u-boot + env + linux in mmc */
80
81 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x71000000 dtb; " \
82                                 "fatload mmc 0:1 0x72000000 zImage; " \
83                                 "bootz 0x72000000 - 0x71000000"
84 #endif
85
86 /*
87  * Size of malloc() pool
88  */
89 #define CONFIG_SYS_MALLOC_LEN           ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
90
91 /* Defines for SPL */
92 #define CONFIG_SPL_MAX_SIZE             0x010000
93 #define CONFIG_SPL_STACK                0x310000
94
95 #define CONFIG_SYS_MONITOR_LEN          0x80000
96
97 #ifdef CONFIG_SD_BOOT
98
99 #define CONFIG_SPL_BSS_START_ADDR       0x70000000
100 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000
101 #define CONFIG_SYS_SPL_MALLOC_START     0x70080000
102 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00080000
103
104 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
105
106 #elif CONFIG_NAND_BOOT
107 #define CONFIG_SPL_NAND_SOFTECC
108 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
109 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
110 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
111
112 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
113 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
114 #define CONFIG_SYS_NAND_PAGE_COUNT      64
115 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
116 #define CONFIG_SYS_NAND_ECCSIZE         256
117 #define CONFIG_SYS_NAND_ECCBYTES        3
118 #define CONFIG_SYS_NAND_OOBSIZE         64
119 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
120                                           48, 49, 50, 51, 52, 53, 54, 55, \
121                                           56, 57, 58, 59, 60, 61, 62, 63, }
122 #endif
123
124 #define CONFIG_SPL_ATMEL_SIZE
125 #define CONFIG_SYS_MASTER_CLOCK         132096000
126 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
127 #define CONFIG_SYS_MCKR                 0x1301
128 #define CONFIG_SYS_MCKR_CSS             0x1302
129
130 #endif