include/configs/at91sam9m10g45ek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2007-2008
   4  * Stelian Pop <stelian@popies.net>
   5  * Lead Tech Design <www.leadtechdesign.com>
   6  *
   7  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  14
  15 /* ARM asynchronous clock */
  16 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  17 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  18
  19 #define CONFIG_AT91SAM9M10G45EK
  20
  21 /* general purpose I/O */
  22 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  23
  24 /* LCD */
  25 #define LCD_BPP                         LCD_COLOR8
  26 #define CONFIG_LCD_LOGO
  27 #undef LCD_TEST_PATTERN
  28 #define CONFIG_LCD_INFO
  29 #define CONFIG_LCD_INFO_BELOW_LOGO
  30 #define CONFIG_ATMEL_LCD
  31 #define CONFIG_ATMEL_LCD_RGB565
  32 /* board specific(not enough SRAM) */
  33 #define CONFIG_AT91SAM9G45_LCD_BASE             0x73E00000
  34
  35 /*
  36  * BOOTP options
  37  */
  38 #define CONFIG_BOOTP_BOOTFILESIZE
  39
  40 /* SDRAM */
  41 #define CONFIG_SYS_SDRAM_BASE           0x70000000
  42 #define CONFIG_SYS_SDRAM_SIZE           0x08000000
  43
  44 #define CONFIG_SYS_INIT_SP_ADDR \
  45         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
  46
  47 /* NAND flash */
  48 #ifdef CONFIG_CMD_NAND
  49 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  50 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
  51 #define CONFIG_SYS_NAND_DBW_8
  52 /* our ALE is AD21 */
  53 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
  54 /* our CLE is AD22 */
  55 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
  56 #define CONFIG_SYS_NAND_ENABLE_PIN              AT91_PIN_PC14
  57 #define CONFIG_SYS_NAND_READY_PIN               AT91_PIN_PC8
  58
  59 #endif
  60
  61 /* Ethernet */
  62 #define CONFIG_RESET_PHY_R
  63 #define CONFIG_AT91_WANTS_COMMON_PHY
  64
  65 #ifdef CONFIG_NAND_BOOT
  66 /* bootstrap + u-boot + env in nandflash */
  67
  68 #define CONFIG_BOOTCOMMAND                                              \
  69         "nand read 0x70000000 0x200000 0x300000;"                       \
  70         "bootm 0x70000000"
  71 #elif CONFIG_SD_BOOT
  72 /* bootstrap + u-boot + env + linux in mmc */
  73
  74 #define CONFIG_BOOTCOMMAND      "fatload mmc 0:1 0x71000000 dtb; " \
  75                                 "fatload mmc 0:1 0x72000000 zImage; " \
  76                                 "bootz 0x72000000 - 0x71000000"
  77 #endif
  78
  79 /* Defines for SPL */
  80 #define CONFIG_SPL_MAX_SIZE             0x010000
  81 #define CONFIG_SPL_STACK                0x310000
  82
  83 #define CONFIG_SYS_MONITOR_LEN          0x80000
  84
  85 #ifdef CONFIG_SD_BOOT
  86
  87 #define CONFIG_SPL_BSS_START_ADDR       0x70000000
  88 #define CONFIG_SPL_BSS_MAX_SIZE         0x00080000
  89 #define CONFIG_SYS_SPL_MALLOC_START     0x70080000
  90 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00080000
  91
  92 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
  93
  94 #elif CONFIG_NAND_BOOT
  95 #define CONFIG_SPL_NAND_SOFTECC
  96 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
  97
  98 #define CONFIG_SYS_NAND_ECCSIZE         256
  99 #define CONFIG_SYS_NAND_ECCBYTES        3
 100 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
 101                                           48, 49, 50, 51, 52, 53, 54, 55, \
 102                                           56, 57, 58, 59, 60, 61, 62, 63, }
 103 #endif
 104
 105 #define CONFIG_SPL_ATMEL_SIZE
 106 #define CONFIG_SYS_MASTER_CLOCK         132096000
 107 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
 108 #define CONFIG_SYS_MCKR                 0x1301
 109 #define CONFIG_SYS_MCKR_CSS             0x1302
 110
 111 #endif