include/configs/at91-sama5_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Common part of configuration settings for the AT91 SAMA5 board.
   4  *
   5  * Copyright (C) 2015 Atmel Corporation
   6  *                    Josh Wu <josh.wu@atmel.com>
   7  */
   8
   9 #ifndef __AT91_SAMA5_COMMON_H
  10 #define __AT91_SAMA5_COMMON_H
  11
  12 #include <linux/kconfig.h>
  13
  14 /* ARM asynchronous clock */
  15 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  16 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
  17
  18 /*
  19  * BOOTP options
  20  */
  21 #define CONFIG_BOOTP_BOOTFILESIZE
  22
  23 #ifdef CONFIG_SD_BOOT
  24 #define CONFIG_BOOTCOMMAND      "if test ! -n ${dtb_name}; then "       \
  25                                     "setenv dtb_name at91-${board_name}.dtb; " \
  26                                 "fi; "                                  \
  27                                 "fatload mmc 0:1 0x21000000 ${dtb_name}; " \
  28                                 "fatload mmc 0:1 0x22000000 zImage; "   \
  29                                 "bootz 0x22000000 - 0x21000000"
  30
  31 #else
  32
  33 #ifdef CONFIG_NAND_BOOT
  34 /* u-boot env in nand flash */
  35 #define CONFIG_BOOTCOMMAND              "nand read 0x21000000 0x180000 0x80000;"        \
  36                                         "nand read 0x22000000 0x200000 0x600000;"       \
  37                                         "bootz 0x22000000 - 0x21000000"
  38 #elif CONFIG_SPI_BOOT
  39 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
  40 #define CONFIG_BOOTCOMMAND              "sf probe 0; "                          \
  41                                         "sf read 0x21000000 0x60000 0xc000; "   \
  42                                         "sf read 0x22000000 0x6c000 0x394000; " \
  43                                         "bootz 0x22000000 - 0x21000000"
  44 #elif CONFIG_QSPI_BOOT
  45 #define CONFIG_BOOTCOMMAND              "sf probe 0; "                                  \
  46                                         "sf read 0x21000000 0x180000 0x80000; "         \
  47                                         "sf read 0x22000000 0x200000 0x600000; "        \
  48                                         "bootz 0x22000000 - 0x21000000"
  49 #endif
  50
  51 #endif
  52
  53 #endif