include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #if (CONFIG_SYS_BOARD_VERSION == 5)
  17 #define CONFIG_MXC_UART_BASE    UART2_BASE
  18 #define CONSOLE_DEV     "ttymxc1"
  19 #elif (CONFIG_SYS_BOARD_VERSION == 6)
  20 #define CONFIG_MXC_UART_BASE    UART1_BASE
  21 #define CONSOLE_DEV     "ttymxc0"
  22 #endif
  23
  24 #define CONFIG_FEC_XCV_TYPE             RGMII
  25
  26 /* Framebuffer */
  27 #define CONFIG_SYS_LDB_CLOCK    28341000
  28
  29 #include "mx6_common.h"
  30
  31 #define CONFIG_MACH_TYPE        4501
  32 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  33
  34 /* MMC Configs */
  35 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  36
  37 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  38 #define CONFIG_ETHPRIME                 "FEC"
  39 #define CONFIG_FEC_MXC_PHYADDR          0
  40
  41 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  42
  43 #ifdef CONFIG_IMX_HAB
  44 #define HAB_EXTRA_SETTINGS \
  45         "hab_check_addr=" \
  46                 "if hab_auth_img ${check_addr} ${filesize} ; then " \
  47                         "true;" \
  48                 "else " \
  49                         "echo \"HAB checks ${hab_check_filetype} " \
  50                         "failed!\"; " \
  51                         "false; " \
  52                 "fi;\0" \
  53         "hab_check_file_fit=" \
  54                 "if env exists enable_hab_check && test " \
  55                         "${enable_hab_check} -eq 1 ; then " \
  56                         "setenv hab_check_filetype \"FIT file on SD card " \
  57                         "or eMMC\";" \
  58                         "env set check_addr ${fit_addr_r};" \
  59                         "run hab_check_addr;" \
  60                 "else " \
  61                         "true; "\
  62                 "fi;\0" \
  63         "hab_check_file_bootscript=" \
  64                 "if env exists enable_hab_check && test " \
  65                         "${enable_hab_check} -eq 1 ; then " \
  66                         "setenv hab_check_filetype \"Bootscript file\";" \
  67                         "env set check_addr ${loadaddr};" \
  68                         "run hab_check_addr;" \
  69                 "else " \
  70                         "true; "\
  71                 "fi;\0" \
  72         "hab_check_flash_fit=" \
  73                 "if env exists enable_hab_check && test " \
  74                         "${enable_hab_check} -eq 1 ; then " \
  75                         "setenv hab_check_filetype \"FIT files on flash\";" \
  76                         "env set check_addr ${fit_addr_r};" \
  77                         "run hab_check_addr;" \
  78                 "else " \
  79                         "true; "\
  80                 "fi;\0" \
  81         "enable_hab_check=1\0"
  82 #else
  83 #define HAB_EXTRA_SETTINGS \
  84         "hab_check_addr=echo HAB check addr always returns " \
  85                 "true;true\0" \
  86         "hab_check_file_fit=echo HAB check FIT file always returns " \
  87                 "true;true\0" \
  88         "hab_check_flash_fit=echo HAB check flash FIT always returns " \
  89                 "true;true\0" \
  90         "hab_check_file_bootscript=echo HAB check bootscript always " \
  91                 "returns true;true\0" \
  92         "enable_hab_check=0\0"
  93 #endif
  94
  95 #if (CONFIG_SYS_BOARD_VERSION == 5)
  96 #define EXTRA_ENV_BOARD_SETTINGS \
  97         "dead=while true; do; " \
  98                 "led led_red on; sleep 1;" \
  99                 "led led_red off; sleep 1;" \
 100         "done\0"
 101 #elif (CONFIG_SYS_BOARD_VERSION == 6)
 102 #define EXTRA_ENV_BOARD_SETTINGS \
 103         "dead=while true; do; " \
 104                 "led led_red on; led led_red2 on; sleep 1;" \
 105                 "led led_red off; led led_red2 off;; sleep 1;" \
 106         "done\0"
 107 #endif
 108
 109 #define CONFIG_EXTRA_ENV_SETTINGS \
 110         "disable_giga=yes\0" \
 111         "usb_pgood_delay=2000\0" \
 112         "nor_bootdelay=-2\0" \
 113         "script=u-boot.scr\0" \
 114         "loadaddr=0x12000000\0" \
 115         "fit_addr_r=0x14000000\0" \
 116         "uboot_sz=d0000\0" \
 117         "panel=lb07wv8\0" \
 118         "splashpos=m,m\0" \
 119         "console=" CONSOLE_DEV "\0" \
 120         "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
 121         "mtdids=nor0=spi0.0\0" \
 122         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
 123                 "-(ubi-nor)\0" \
 124         "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
 125         "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
 126         "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
 127         "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
 128         "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
 129         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 130                 "bootmode=${bootmode} rng_core.default_quality=1000 " \
 131                 "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
 132         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 133         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
 134         "get_env=mw ${loadaddr} 0 0x20000;" \
 135                 "mmc rescan;" \
 136                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 137                 "env import -t ${loadaddr}\0" \
 138         "default_env=gpio set wp_spi_nor.gpio-hog;" \
 139                 "sf probe;" \
 140                 "sf protect unlock 0 0x1000000;" \
 141                 "mw ${loadaddr} 0 0x20000;" \
 142                 "env export -t ${loadaddr} serial# ethaddr " \
 143                 "board_type panel;" \
 144                 "env default -a;" \
 145                 "env import -t ${loadaddr}\0" \
 146         "loadbootscript=" \
 147                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 148                 "${script};\0" \
 149         "loadbootscriptUSB=" \
 150                 "ext4load usb 0 ${loadaddr} ${script};\0" \
 151         "loadbootscriptUSBf=" \
 152                 "fatload usb 0 ${loadaddr} ${script};\0" \
 153         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
 154                 "source \0" \
 155         "bootscript=echo Running bootscript from mmc ...; " \
 156                 "source \0" \
 157         "mmcpart=1\0" \
 158         "mmcdev=0\0" \
 159         "emmcpart=1\0" \
 160         "emmcdev=1\0" \
 161         "sysnum=1\0" \
 162         "rescue_sysnum=0\0" \
 163         "rreason=18\0" \
 164         "mainboot=echo Booting from eMMC ...; " \
 165                 "run mainargs addmtd addmisc;" \
 166                 "run boot_board_type;" \
 167                 "bootm ${fit_addr_r}\0" \
 168         "mainargs=setenv bootargs console=${console},${baudrate} " \
 169                 "root=${emmcroot} rootfstype=ext4\0 " \
 170         "main_load_fit=run mk_fitfile_path; " \
 171                 "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 172                 "${fit_file}; " \
 173                 "imi ${fit_addr_r}\0 " \
 174         "rescue_load_fit=run mk_rescue_fitfile_path; " \
 175                 "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 176                 "${rescue_fit_file}; " \
 177                 "imi ${fit_addr_r}\0" \
 178         "main_load_pubkey=run mk_pubkey_path; " \
 179                 "setenv hab_check_filetype \"PCR.pem\";" \
 180                 "env set check_addr ${loadaddr};" \
 181                 "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
 182                 "${pubkey}\0" \
 183         "rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 184                 "setenv hab_check_filetype \"PCR.pem\";" \
 185                 "env set check_addr ${loadaddr};" \
 186                 "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
 187                 "${pubkey}\0" \
 188         "mainRargs=setenv bootargs console=${console},${baudrate} " \
 189                 "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
 190         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 191         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 192                 "root=${mmcroot}\0" \
 193         "mmcRargs=setenv bootargs console=${console},${baudrate} " \
 194                 "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
 195         "mmcboot=echo Booting from mmc ...; " \
 196                 "run mmcargs addmtd addmisc;" \
 197                 "run boot_board_type;" \
 198                 "bootm ${fit_addr_r}\0" \
 199         "mmc_load_fit=run mk_fitfile_path; " \
 200                 "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 201                 "${fit_file}\0" \
 202                 "imi ${fit_addr_r}\0" \
 203         "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
 204                 "ext4load mmc ${mmcdev}:${mmcpart} " \
 205                 "${fit_addr_r} ${rescue_fit_file}\0" \
 206                 "imi ${fit_addr_r}\0" \
 207         "mmc_load_uboot=run mk_uboot_path; " \
 208                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 209                 "${uboot}\0" \
 210         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 211                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 212                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 213                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 214                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 215                 "sf write ${loadaddr} 400 ${filesize};" \
 216                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 217                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 218         "mmc_load_pubkey=run mk_pubkey_path; " \
 219                 "setenv hab_check_filetype \"PCR.pem\";" \
 220                 "env set check_addr ${loadaddr};" \
 221                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 222                 "${pubkey}\0" \
 223         "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 224                 "setenv hab_check_filetype \"PCR.pem\";" \
 225                 "env set check_addr ${loadaddr};" \
 226                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 227                 "${pubkey}\0" \
 228         "rescueboot=echo Booting rescue system ...; " \
 229                 "run addmtd addmisc;" \
 230                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
 231                 "run boot_board_type;" \
 232                 "if bootm ${fit_addr_r}; then ; " \
 233                 "else " \
 234                         "run dead; " \
 235                 "fi; \0" \
 236         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
 237                 "\\\\${bootargs} " \
 238                 "rescueReason=$rreason\0 " \
 239         "usb_load_fit=run mk_fitfile_path; " \
 240                 "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
 241         "usb_load_fitf=run mk_fitfile_path; " \
 242                 "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
 243         "usb_load_rescuefit=run mk_rescue_fitfile_path; " \
 244                 "ext4load usb 0 ${fit_addr_r} " \
 245                 "${rescue_fit_file}\0" \
 246         "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
 247                 "fatload usb 0 ${fit_addr_r} " \
 248                 "${rescue_fit_file}\0" \
 249         "usb_load_pubkey=run mk_pubkey_path; " \
 250                 "setenv hab_check_filetype \"PCR.pem\";" \
 251                 "env set check_addr ${loadaddr};" \
 252                 "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
 253         "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 254                 "setenv hab_check_filetype \"PCR.pem\";" \
 255                 "env set check_addr ${loadaddr};" \
 256                 "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
 257         "usb_load_pubkeyf=run mk_pubkey_path; " \
 258                 "setenv hab_check_filetype \"PCR.pem\";" \
 259                 "env set check_addr ${loadaddr};" \
 260                 "fatload usb 0 ${loadaddr} ${pubkey}\0" \
 261         "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
 262                 "setenv hab_check_filetype \"PCR.pem\";" \
 263                 "env set check_addr ${loadaddr};" \
 264                 "fatload usb 0 ${loadaddr} ${pubkey}\0" \
 265         "usbroot=/dev/sda1 rootwait rw\0" \
 266         "usbboot=echo Booting from usb-stick ...; " \
 267                 "run usbargs addmtd addmisc;" \
 268                 "run boot_board_type;" \
 269                 "bootm ${fit_addr_r}\0" \
 270         "usbargs=setenv bootargs console=${console},${baudrate} " \
 271                 "root=${usbroot}\0" \
 272         "usbRargs=setenv bootargs console=${console},${baudrate} " \
 273                 "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
 274         "mmc_rescue_boot=" \
 275                 "run r_reason_syserr;" \
 276                 "if run mmc_rescue_load_pubkey hab_check_addr " \
 277                 "mmc_rescue_load_fit hab_check_file_fit; then " \
 278                         "run mmcRargs; run rescueboot; " \
 279                 "else " \
 280                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
 281                         "run dead; " \
 282                 "fi;\0" \
 283         "main_rescue_boot=" \
 284                 "if run main_load_pubkey hab_check_addr " \
 285                 "main_load_fit hab_check_flash_fit; then " \
 286                         "if run mainboot; then ; " \
 287                         "else " \
 288                                 "run r_reason_syserr;" \
 289                                 "if run rescue_load_pubkey hab_check_addr " \
 290                                 "rescue_load_fit hab_check_file_fit; then " \
 291                                         "run mainRargs; run rescueboot; " \
 292                                 "else " \
 293                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
 294                                         "run dead; " \
 295                                 "fi; " \
 296                         "fi; " \
 297                 "else " \
 298                         "run r_reason_syserr;" \
 299                         "if run rescue_load_pubkey hab_check_addr " \
 300                         "rescue_load_fit hab_check_file_fit; then " \
 301                                 "run mainRargs; run rescueboot; " \
 302                         "else " \
 303                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 304                                 "run dead; " \
 305                         "fi; " \
 306                 "fi;\0" \
 307         "usb_mmc_rescue_boot=" \
 308                 "usb start;" \
 309                 "if usb storage; then " \
 310                         "if run loadbootscriptUSB " \
 311                                 "hab_check_file_bootscript;" \
 312                                 "then run bootscriptUSB; " \
 313                         "fi; " \
 314                         "if run loadbootscriptUSBf " \
 315                                 "hab_check_file_bootscript;" \
 316                                 "then run bootscriptUSB; " \
 317                         "fi; " \
 318                         "if run usb_load_pubkey hab_check_addr " \
 319                         "usb_load_fit hab_check_file_fit; then " \
 320                                 "run usbboot; " \
 321                         "fi; " \
 322                         "if run usb_load_pubkeyf hab_check_addr " \
 323                         "usb_load_fitf hab_check_file_fit; then " \
 324                                 "run usbboot; " \
 325                         "fi; "\
 326                         "if run usb_rescue_load_pubkey hab_check_addr " \
 327                         "usb_load_rescuefit hab_check_file_fit; then " \
 328                                 "run r_reason_syserr usbRargs; run rescueboot;" \
 329                         "fi; " \
 330                         "if run usb_rescue_load_pubkeyf hab_check_addr " \
 331                         "usb_load_rescuefitf hab_check_file_fit; then " \
 332                                 "run r_reason_syserr usbRargs; run rescueboot;" \
 333                         "fi; " \
 334                         "run mmc_rescue_boot;" \
 335                 "fi; "\
 336                 "run mmc_rescue_boot;\0" \
 337         "rescue_xload_boot=" \
 338                 "run r_reason_syserr;" \
 339                 "if test ${bootmode} -ne 0 ; then " \
 340                         "mmc dev ${mmcdev};" \
 341                         "if mmc rescan; then " \
 342                                 "if run mmc_rescue_load_pubkey " \
 343                                 "hab_check_addr " \
 344                                 "mmc_rescue_load_fit " \
 345                                 "hab_check_file_fit; then " \
 346                                         "run mmcRargs; run rescueboot; " \
 347                                 "else " \
 348                                         "usb start;" \
 349                                         "if usb storage; then " \
 350                                                 "if run usb_rescue_load_pubkey " \
 351                                                 "hab_check_addr " \
 352                                                 "usb_load_rescuefit " \
 353                                                 "hab_check_file_fit; then " \
 354                                                         "run usbRargs; run rescueboot;" \
 355                                                 "fi; " \
 356                                                 "if run usb_rescue_load_pubkeyf " \
 357                                                 "hab_check_addr " \
 358                                                 "usb_load_rescuefitf " \
 359                                                 "hab_check_file_fit; then " \
 360                                                         "run usbRargs; run rescueboot;" \
 361                                                 "fi; " \
 362                                         "fi;" \
 363                                 "fi;" \
 364                                 "echo RESCUE SYSTEM ON SD OR " \
 365                                         "USB BOOT FAILURE;" \
 366                                 "run dead; " \
 367                         "else " \
 368                                 "usb start;" \
 369                                 "if usb storage; then " \
 370                                         "if run usb_rescue_load_pubkey " \
 371                                         "hab_check_addr " \
 372                                         "usb_load_rescuefit " \
 373                                         "hab_check_file_fit; then " \
 374                                                 "run usbRargs; run rescueboot;" \
 375                                         "fi; " \
 376                                         "if run usb_rescue_load_pubkeyf " \
 377                                         "hab_check_addr " \
 378                                         "usb_load_rescuefitf " \
 379                                         "hab_check_file_fit; then " \
 380                                                 "run usbRargs; run rescueboot;" \
 381                                         "fi; " \
 382                                 "fi;" \
 383                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
 384                                 "run dead; " \
 385                         "fi; " \
 386                 "else "\
 387                         "if run rescue_load_pubkey hab_check_addr " \
 388                         "rescue_load_fit hab_check_file_fit; then " \
 389                                 "run mainRargs; run rescueboot; " \
 390                         "else " \
 391                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
 392                                 "run dead; " \
 393                         "fi; " \
 394                 "fi;\0" \
 395         "ari_boot=if test ${bootmode} -ne 0 ; then " \
 396                 "mmc dev ${mmcdev};" \
 397                 "if mmc rescan; then " \
 398                         "if run loadbootscript hab_check_file_bootscript;" \
 399                                 "then run bootscript; " \
 400                         "fi; " \
 401                         "if run mmc_load_pubkey hab_check_addr " \
 402                         "mmc_load_fit hab_check_file_fit; then " \
 403                                 "if run mmcboot; then ; " \
 404                                 "else " \
 405                                         "run mmc_rescue_boot;" \
 406                                 "fi; " \
 407                         "else " \
 408                                 "run usb_mmc_rescue_boot;" \
 409                         "fi; " \
 410                 "else " \
 411                         "run usb_mmc_rescue_boot;" \
 412                 "fi; " \
 413         "else "\
 414                 "run main_rescue_boot;" \
 415         "fi; \0"\
 416         HAB_EXTRA_SETTINGS \
 417         EXTRA_ENV_BOARD_SETTINGS
 418
 419 #define CONFIG_ARP_TIMEOUT              200UL
 420
 421 /* Physical Memory Map */
 422 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 423
 424 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 425 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 426 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 427
 428 #define CONFIG_SYS_INIT_SP_OFFSET \
 429         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 430 #define CONFIG_SYS_INIT_SP_ADDR \
 431         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 432
 433 #define CONFIG_SYS_FSL_USDHC_NUM        2
 434
 435 /* DMA stuff, needed for GPMI/MXS NAND support */
 436
 437 /* USB Configs */
 438 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 439 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 440 #define CONFIG_MXC_USB_FLAGS    0
 441
 442 /* UBI support */
 443
 444 /* Framebuffer */
 445 /* check this console not needed, after test remove it */
 446 #define CONFIG_IMX_VIDEO_SKIP
 447 #define CONFIG_VIDEO_LOGO
 448 #define CONFIG_VIDEO_BMP_LOGO
 449
 450 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 451
 452 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
 453                 "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
 454
 455 #endif                         /* __ARISTAINETOS2_CONFIG_H */