Merge tag 'u-boot-amlogic-20200108' of https://gitlab.denx.de/u-boot/custodians/u...
[platform/kernel/u-boot.git] / include / configs / aristainetos2.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2015
4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
8  *
9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
10  */
11 #ifndef __ARISTAINETOS2_CONFIG_H
12 #define __ARISTAINETOS2_CONFIG_H
13
14 #define CONFIG_HOSTNAME         "aristainetos2"
15
16 #define CONFIG_MXC_UART_BASE    UART2_BASE
17 #define CONSOLE_DEV     "ttymxc1"
18
19 #define CONFIG_FEC_XCV_TYPE             RGMII
20
21 /* Framebuffer */
22 #define CONFIG_SYS_LDB_CLOCK    28341000
23 #define CONFIG_LG4573
24
25 #include "mx6_common.h"
26
27 #define CONFIG_MACH_TYPE        4501
28 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
29
30 /* MMC Configs */
31 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
32
33 #define IMX_FEC_BASE                    ENET_BASE_ADDR
34 #define CONFIG_ETHPRIME                 "FEC"
35 #define CONFIG_FEC_MXC_PHYADDR          0
36
37 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
38
39 #ifdef CONFIG_IMX_HAB
40 #define HAB_EXTRA_SETTINGS \
41         "hab_check_addr=" \
42                 "if hab_auth_img ${check_addr} ${filesize} ; then " \
43                         "true;" \
44                 "else " \
45                         "echo \"HAB checks ${hab_check_filetype} " \
46                         "failed!\"; " \
47                         "false; " \
48                 "fi;\0" \
49         "hab_check_file_fit=" \
50                 "if env exists enable_hab_check && test " \
51                         "${enable_hab_check} -eq 1 ; then " \
52                         "setenv hab_check_filetype \"FIT file on SD card " \
53                         "or eMMC\";" \
54                         "env set check_addr ${fit_addr_r};" \
55                         "run hab_check_addr;" \
56                 "else " \
57                         "true; "\
58                 "fi;\0" \
59         "hab_check_file_bootscript=" \
60                 "if env exists enable_hab_check && test " \
61                         "${enable_hab_check} -eq 1 ; then " \
62                         "setenv hab_check_filetype \"Bootscript file\";" \
63                         "env set check_addr ${loadaddr};" \
64                         "run hab_check_addr;" \
65                 "else " \
66                         "true; "\
67                 "fi;\0" \
68         "hab_check_flash_fit=" \
69                 "if env exists enable_hab_check && test " \
70                         "${enable_hab_check} -eq 1 ; then " \
71                         "setenv hab_check_filetype \"FIT files on flash\";" \
72                         "env set check_addr ${fit_addr_r};" \
73                         "run hab_check_addr;" \
74                 "else " \
75                         "true; "\
76                 "fi;\0" \
77         "enable_hab_check=1\0"
78 #else
79 #define HAB_EXTRA_SETTINGS \
80         "hab_check_file_fit=echo HAB check FIT file always returns " \
81                 "true;true\0" \
82         "hab_check_flash_fit=echo HAB check flash FIT always returns " \
83                 "true;true\0" \
84         "hab_check_file_bootscript=echo HAB check bootscript always " \
85                 "returns true;true\0" \
86         "enable_hab_check=0\0"
87 #endif
88
89 #if (CONFIG_SYS_BOARD_VERSION == 3)
90 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
91         "dead=led led_red on\0" \
92         "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
93         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
94                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
95         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
96                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
97         "mainboot=echo Booting from SD-card ...; " \
98                 "run mainargs addmtd addmisc;" \
99                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
100                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
101                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
102                 "run boot_board_type;" \
103                 "bootm ${fit_addr_r}\0" \
104         "mainargs=setenv bootargs console=${console},${baudrate} " \
105                 "root=${mmcroot}\0" \
106         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
107                 "${fit_file}\0" \
108         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
109                 "${fit_addr_r} ${rescue_fit_file}\0"
110 #elif (CONFIG_SYS_BOARD_VERSION == 4)
111 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
112         "dead=led led_red on;led led_red2 on;\0" \
113         "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
114         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
115                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
116         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
117                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
118         "mainboot=echo Booting from SD-card ...; " \
119                 "run mainargs addmtd addmisc;" \
120                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
121                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
122                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
123                 "run boot_board_type;" \
124                 "bootm ${fit_addr_r}\0" \
125         "mainargs=setenv bootargs console=${console},${baudrate} " \
126                 "root=${mmcroot}\0" \
127         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
128                 "${fit_file}\0" \
129         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
130                 "${fit_addr_r} ${rescue_fit_file}\0"
131 #elif (CONFIG_SYS_BOARD_VERSION == 5)
132 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
133         "emmcpart=1\0" \
134         "emmc_rescue_part=3\0" \
135         "emmcdev=1\0" \
136         "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
137         "dead=led led_red on\0" \
138         "mtdids=nor0=spi0.0\0" \
139         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
140                 "-(ubi-nor)\0" \
141         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
142                 "bootmode=${bootmode} mmcpart=${mmcpart} " \
143                 "emmcpart=${emmcpart}\0" \
144         "mainboot=echo Booting from eMMC ...; " \
145                 "run mainargs addmtd addmisc;" \
146                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
147                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
148                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
149                 "run boot_board_type;" \
150                 "bootm ${fit_addr_r}\0" \
151         "mainargs=setenv bootargs console=${console},${baudrate} " \
152                 "root=${emmcroot} rootfstype=ext4\0 " \
153         "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
154                 "${fit_file}; " \
155                 "imi ${fit_addr_r}\0 " \
156         "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \
157                 "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0"
158 #else
159 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
160         "dead=led led_red on\0" \
161         "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
162         "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
163                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
164         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
165                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
166         "mainboot=echo Booting from SD-card ...; " \
167                 "run mainargs addmtd addmisc;" \
168                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
169                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
170                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
171                 "run boot_board_type;" \
172                 "bootm ${fit_addr_r}\0" \
173         "mainargs=setenv bootargs console=${console},${baudrate} " \
174                 "root=${mmcroot}\0" \
175         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
176                 "${fit_file}\0" \
177         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
178                 "${fit_addr_r} ${rescue_fit_file}\0"
179 #endif
180
181 #define CONFIG_EXTRA_ENV_SETTINGS \
182         "disable_giga=yes\0" \
183         "usb_pgood_delay=2000\0" \
184         "nor_bootdelay=-2\0" \
185         "script=u-boot.scr\0" \
186         "fit_file=/boot/system.itb\0" \
187         "rescue_fit_file=/boot/rescue.itb\0" \
188         "loadaddr=0x12000000\0" \
189         "fit_addr_r=0x14000000\0" \
190         "uboot=/boot/u-boot.imx\0" \
191         "uboot_sz=d0000\0" \
192         "panel=lb07wv8\0" \
193         "splashpos=m,m\0" \
194         "console=" CONSOLE_DEV "\0" \
195         "fdt_high=0xffffffff\0"   \
196         "initrd_high=0xffffffff\0" \
197         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
198         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
199         "get_env=mw ${loadaddr} 0 0x20000;" \
200                 "mmc rescan;" \
201                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
202                 "env import -t ${loadaddr}\0" \
203         "default_env=gpio set wp_spi_nor.gpio-hog;" \
204                 "sf probe;" \
205                 "sf protect unlock 0 0x1000000;" \
206                 "mw ${loadaddr} 0 0x20000;" \
207                 "env export -t ${loadaddr} serial# ethaddr " \
208                 "board_type panel addmisc addmiscM addmiscC addmiscD;" \
209                 "env default -a;" \
210                 "env import -t ${loadaddr}\0" \
211         "loadbootscript=" \
212                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
213                 "${script};\0" \
214         "loadbootscriptUSB=" \
215                 "ext4load usb 0 ${loadaddr} ${script};\0" \
216         "loadbootscriptUSBf=" \
217                 "fatload usb 0 ${loadaddr} ${script};\0" \
218         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
219                 "source\0" \
220         "bootscript=echo Running bootscript from mmc ...; " \
221                 "source\0" \
222         "mmcpart=1\0" \
223         "mmcrescuepart=3\0" \
224         "mmcdev=0\0" \
225         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
226         "mmcargs=setenv bootargs console=${console},${baudrate} " \
227                 "root=${mmcroot}\0" \
228         "mmcboot=echo Booting from mmc ...; " \
229                 "run mmcargs addmtd addmisc;" \
230                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
231                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
232                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
233                 "run boot_board_type;" \
234                 "bootm ${fit_addr_r}\0" \
235         "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
236                 "${fit_file}\0" \
237         "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
238                 "${uboot}\0" \
239         "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
240                 "${fit_addr_r} ${rescue_fit_file}\0" \
241         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
242                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
243                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
244                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
245                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
246                 "sf write ${loadaddr} 400 ${filesize};" \
247                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
248                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
249         "rescueargs=setenv bootargs console=${console},${baudrate} " \
250                 "root=/dev/ram rw\0 " \
251         "rescueboot=echo Booting rescue system ...; " \
252                 "run rescueargs addmtd addmisc;" \
253                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
254                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
255                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
256                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
257                 "run boot_board_type;" \
258                 "if bootm ${fit_addr_r}; then ; " \
259                 "else " \
260                         "run dead; " \
261                 "fi; \0" \
262         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
263                 "\\\\${bootargs} " \
264         "rescueReason=18\0 " \
265         "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
266         "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
267         "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
268                 "${rescue_fit_file}\0" \
269         "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
270                 "${rescue_fit_file}\0" \
271         "usbroot=/dev/sda1 rootwait rw\0" \
272         "usbboot=echo Booting from usb-stick ...; " \
273                 "run usbargs addmtd addmisc;" \
274                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
275                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
276                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
277                 "run boot_board_type;" \
278                 "bootm ${fit_addr_r}\0" \
279         "usbargs=setenv bootargs console=${console},${baudrate} " \
280                 "root=${usbroot}\0" \
281         "mmc_rescue_boot=" \
282                 "run r_reason_syserr;" \
283                 "if run mmc_rescue_load_fit hab_check_file_fit; then " \
284                         "run rescueboot; " \
285                 "else " \
286                         "run dead; " \
287                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
288                 "fi;\0" \
289         "main_rescue_boot=" \
290                 "if run main_load_fit hab_check_flash_fit; then " \
291                         "if run mainboot; then ; " \
292                         "else " \
293                                 "run r_reason_syserr;" \
294                                 "if run rescue_load_fit hab_check_file_fit;" \
295                                         "then run rescueboot; " \
296                                 "else " \
297                                         "run dead; " \
298                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
299                                 "fi; " \
300                         "fi; " \
301                 "else " \
302                         "run r_reason_syserr;" \
303                         "if run rescue_load_fit hab_check_file_fit; then " \
304                                 "run rescueboot; " \
305                         "else " \
306                                 "run dead; " \
307                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
308                         "fi; " \
309                 "fi;\0" \
310         "usb_mmc_rescue_boot=" \
311                 "usb start;" \
312                 "if usb storage; then " \
313                         "if run loadbootscriptUSB " \
314                                 "hab_check_file_bootscript;" \
315                                 "then run bootscriptUSB; " \
316                         "fi; " \
317                         "if run loadbootscriptUSBf " \
318                                 "hab_check_file_bootscript;" \
319                                 "then run bootscriptUSB; " \
320                         "fi; " \
321                         "if run usb_load_fit hab_check_file_fit; then " \
322                                 "run usbboot; " \
323                         "fi; " \
324                         "if run usb_load_fitf hab_check_file_fit; then " \
325                                 "run usbboot; " \
326                         "fi; "\
327                         "if run usb_load_rescuefit hab_check_file_fit;" \
328                                 "then run r_reason_syserr rescueboot;" \
329                         "fi; " \
330                         "if run usb_load_rescuefitf hab_check_file_fit;" \
331                                 "then run r_reason_syserr rescueboot;" \
332                         "fi; " \
333                         "run mmc_rescue_boot;" \
334                 "fi; "\
335                 "run mmc_rescue_boot;\0" \
336         "rescue_xload_boot=" \
337                 "run r_reason_syserr;" \
338                 "if test ${bootmode} -ne 0 ; then " \
339                         "mmc dev ${mmcdev};" \
340                         "if mmc rescan; then " \
341                                 "if run mmc_rescue_load_fit " \
342                                         "hab_check_file_fit; then " \
343                                         "run rescueboot; " \
344                                 "else " \
345                                         "usb start;" \
346                                         "if usb storage; then " \
347                                                 "if run usb_load_rescuefit " \
348                                                         "hab_check_file_fit;"\
349                                                         "then " \
350                                                         "run rescueboot;" \
351                                                 "fi; " \
352                                                 "if run usb_load_rescuefitf "\
353                                                         "hab_check_file_fit;"\
354                                                         "then " \
355                                                         "run rescueboot;" \
356                                                 "fi; " \
357                                         "fi;" \
358                                 "fi;" \
359                                 "run dead; " \
360                                 "echo RESCUE SYSTEM ON SD OR " \
361                                         "USB BOOT FAILURE;" \
362                         "else " \
363                                 "usb start;" \
364                                 "if usb storage; then " \
365                                         "if run usb_load_rescuefit " \
366                                                 "hab_check_file_fit; then " \
367                                                 "run rescueboot;" \
368                                         "fi; " \
369                                         "if run usb_load_rescuefitf " \
370                                                 "hab_check_file_fit; then " \
371                                                 "run rescueboot;" \
372                                         "fi; " \
373                                 "fi;" \
374                                 "run dead; " \
375                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
376                         "fi; " \
377                 "else "\
378                         "if run rescue_load_fit hab_check_file_fit; then " \
379                                 "run rescueboot; " \
380                         "else " \
381                                 "run dead; " \
382                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
383                         "fi; " \
384                 "fi;\0" \
385         "ari_boot=if test ${bootmode} -ne 0 ; then " \
386                 "mmc dev ${mmcdev};" \
387                 "if mmc rescan; then " \
388                         "if run loadbootscript hab_check_file_bootscript;" \
389                                 "then run bootscript; " \
390                         "fi; " \
391                         "if run mmc_load_fit hab_check_file_fit; then " \
392                                 "if run mmcboot; then ; " \
393                                 "else " \
394                                         "run mmc_rescue_boot;" \
395                                 "fi; " \
396                         "else " \
397                                 "run usb_mmc_rescue_boot;" \
398                         "fi; " \
399                 "else " \
400                         "run usb_mmc_rescue_boot;" \
401                 "fi; " \
402         "else "\
403                 "run main_rescue_boot;" \
404         "fi; \0"\
405         HAB_EXTRA_SETTINGS \
406         CONFIG_EXTRA_ENV_BOARD_SETTINGS
407
408 #define CONFIG_ARP_TIMEOUT              200UL
409
410 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
411 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
412 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
413
414 /* Physical Memory Map */
415 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
416
417 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
418 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
419 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
420
421 #define CONFIG_SYS_INIT_SP_OFFSET \
422         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
423 #define CONFIG_SYS_INIT_SP_ADDR \
424         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
425
426 #define CONFIG_SYS_FSL_USDHC_NUM        2
427
428 /* NAND stuff */
429 #define CONFIG_SYS_MAX_NAND_DEVICE      1
430 #define CONFIG_SYS_NAND_BASE            0x40000000
431 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
432 #define CONFIG_SYS_NAND_ONFI_DETECTION
433
434 /* DMA stuff, needed for GPMI/MXS NAND support */
435
436 /* USB Configs */
437 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
438 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
439 #define CONFIG_MXC_USB_FLAGS    0
440
441 /* UBI support */
442
443 /* Framebuffer */
444 /* check this console not needed, after test remove it */
445 #define CONFIG_SPLASH_SCREEN
446 #define CONFIG_SPLASH_SCREEN_ALIGN
447 #define CONFIG_IMX_VIDEO_SKIP
448 #define CONFIG_VIDEO_LOGO
449 #define CONFIG_VIDEO_BMP_LOGO
450 #define CONFIG_BMP_16BPP
451 #define CONFIG_VIDEO_BMP_RLE8
452
453 #define CONFIG_IMX6_PWM_PER_CLK 66000000
454
455 #endif                         /* __ARISTAINETOS2_CONFIG_H */