imx6: aristainetos: cleanup default Environment
[platform/kernel/u-boot.git] / include / configs / aristainetos2.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2015
4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
8  *
9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
10  */
11 #ifndef __ARISTAINETOS2_CONFIG_H
12 #define __ARISTAINETOS2_CONFIG_H
13
14 #define CONFIG_HOSTNAME         "aristainetos2"
15
16 #define CONFIG_MXC_UART_BASE    UART2_BASE
17 #define CONSOLE_DEV     "ttymxc1"
18
19 #define CONFIG_FEC_XCV_TYPE             RGMII
20
21 /* Framebuffer */
22 #define CONFIG_SYS_LDB_CLOCK    28341000
23 #define CONFIG_LG4573
24
25 #include "mx6_common.h"
26
27 #define CONFIG_MACH_TYPE        4501
28 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
29
30 /* MMC Configs */
31 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
32
33 #define IMX_FEC_BASE                    ENET_BASE_ADDR
34 #define CONFIG_ETHPRIME                 "FEC"
35 #define CONFIG_FEC_MXC_PHYADDR          0
36
37 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
38
39 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
40         "dead=led led_red on\0" \
41         "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
42         "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
43                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
44         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
45                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
46         "mainboot=echo Booting from SD-card ...; " \
47                 "run mainargs addmtd addmisc;" \
48                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
49                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
50                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
51                 "run boot_board_type;" \
52                 "bootm ${fit_addr_r}\0" \
53         "mainargs=setenv bootargs console=${console},${baudrate} " \
54                 "root=${mmcroot}\0" \
55         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
56                 "${fit_file}\0" \
57         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
58                 "${fit_addr_r} ${rescue_fit_file}\0"
59
60 #define CONFIG_EXTRA_ENV_SETTINGS \
61         "disable_giga=yes\0" \
62         "usb_pgood_delay=2000\0" \
63         "nor_bootdelay=-2\0" \
64         "script=u-boot.scr\0" \
65         "fit_file=/boot/system.itb\0" \
66         "rescue_fit_file=/boot/rescue.itb\0" \
67         "loadaddr=0x12000000\0" \
68         "fit_addr_r=0x14000000\0" \
69         "uboot=/boot/u-boot.imx\0" \
70         "uboot_sz=d0000\0" \
71         "panel=lb07wv8\0" \
72         "splashpos=m,m\0" \
73         "console=" CONSOLE_DEV "\0" \
74         "fdt_high=0xffffffff\0"   \
75         "initrd_high=0xffffffff\0" \
76         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
77         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
78         "get_env=mw ${loadaddr} 0 0x20000;" \
79                 "mmc rescan;" \
80                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
81                 "env import -t ${loadaddr}\0" \
82         "default_env=gpio set wp_spi_nor.gpio-hog;" \
83                 "sf probe;" \
84                 "sf protect unlock 0 0x1000000;" \
85                 "mw ${loadaddr} 0 0x20000;" \
86                 "env export -t ${loadaddr} serial# ethaddr " \
87                 "board_type panel addmisc addmiscM addmiscC addmiscD;" \
88                 "env default -a;" \
89                 "env import -t ${loadaddr}\0" \
90         "loadbootscript=" \
91                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
92                 "${script};\0" \
93         "loadbootscriptUSB=" \
94                 "ext4load usb 0 ${loadaddr} ${script};\0" \
95         "loadbootscriptUSBf=" \
96                 "fatload usb 0 ${loadaddr} ${script};\0" \
97         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
98                 "source\0" \
99         "bootscript=echo Running bootscript from mmc ...; " \
100                 "source\0" \
101         "mmcpart=1\0" \
102         "mmcrescuepart=3\0" \
103         "mmcdev=0\0" \
104         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
105         "mmcargs=setenv bootargs console=${console},${baudrate} " \
106                 "root=${mmcroot}\0" \
107         "mmcboot=echo Booting from mmc ...; " \
108                 "run mmcargs addmtd addmisc;" \
109                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
110                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
111                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
112                 "run boot_board_type;" \
113                 "bootm ${fit_addr_r}\0" \
114         "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
115                 "${fit_file}\0" \
116         "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
117                 "${uboot}\0" \
118         "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
119                 "${fit_addr_r} ${rescue_fit_file}\0" \
120         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
121                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
122                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
123                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
124                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
125                 "sf write ${loadaddr} 400 ${filesize};" \
126                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
127                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
128         "rescueargs=setenv bootargs console=${console},${baudrate} " \
129                 "root=/dev/ram rw\0 " \
130         "rescueboot=echo Booting rescue system ...; " \
131                 "run rescueargs addmtd addmisc;" \
132                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
133                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
134                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
135                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
136                 "run boot_board_type;" \
137                 "if bootm ${fit_addr_r}; then ; " \
138                 "else " \
139                         "run dead; " \
140                 "fi; \0" \
141         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
142                 "\\\\${bootargs} " \
143         "rescueReason=18\0 " \
144         "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
145         "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
146         "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
147                 "${rescue_fit_file}\0" \
148         "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
149                 "${rescue_fit_file}\0" \
150         "usbroot=/dev/sda1 rootwait rw\0" \
151         "usbboot=echo Booting from usb-stick ...; " \
152                 "run usbargs addmtd addmisc;" \
153                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
154                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
155                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
156                 "run boot_board_type;" \
157                 "bootm ${fit_addr_r}\0" \
158         "usbargs=setenv bootargs console=${console},${baudrate} " \
159                 "root=${usbroot}\0" \
160         "mmc_rescue_boot=" \
161                 "run r_reason_syserr;" \
162                 "if run mmc_rescue_load_fit hab_check_file_fit; then " \
163                         "run rescueboot; " \
164                 "else " \
165                         "run dead; " \
166                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
167                 "fi;\0" \
168         "main_rescue_boot=" \
169                 "if run main_load_fit hab_check_flash_fit; then " \
170                         "if run mainboot; then ; " \
171                         "else " \
172                                 "run r_reason_syserr;" \
173                                 "if run rescue_load_fit hab_check_file_fit;" \
174                                         "then run rescueboot; " \
175                                 "else " \
176                                         "run dead; " \
177                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
178                                 "fi; " \
179                         "fi; " \
180                 "else " \
181                         "run r_reason_syserr;" \
182                         "if run rescue_load_fit hab_check_file_fit; then " \
183                                 "run rescueboot; " \
184                         "else " \
185                                 "run dead; " \
186                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
187                         "fi; " \
188                 "fi;\0" \
189         "usb_mmc_rescue_boot=" \
190                 "usb start;" \
191                 "if usb storage; then " \
192                         "if run loadbootscriptUSB " \
193                                 "hab_check_file_bootscript;" \
194                                 "then run bootscriptUSB; " \
195                         "fi; " \
196                         "if run loadbootscriptUSBf " \
197                                 "hab_check_file_bootscript;" \
198                                 "then run bootscriptUSB; " \
199                         "fi; " \
200                         "if run usb_load_fit hab_check_file_fit; then " \
201                                 "run usbboot; " \
202                         "fi; " \
203                         "if run usb_load_fitf hab_check_file_fit; then " \
204                                 "run usbboot; " \
205                         "fi; "\
206                         "if run usb_load_rescuefit hab_check_file_fit;" \
207                                 "then run r_reason_syserr rescueboot;" \
208                         "fi; " \
209                         "if run usb_load_rescuefitf hab_check_file_fit;" \
210                                 "then run r_reason_syserr rescueboot;" \
211                         "fi; " \
212                         "run mmc_rescue_boot;" \
213                 "fi; "\
214                 "run mmc_rescue_boot;\0" \
215         "rescue_xload_boot=" \
216                 "run r_reason_syserr;" \
217                 "if test ${bootmode} -ne 0 ; then " \
218                         "mmc dev ${mmcdev};" \
219                         "if mmc rescan; then " \
220                                 "if run mmc_rescue_load_fit " \
221                                         "hab_check_file_fit; then " \
222                                         "run rescueboot; " \
223                                 "else " \
224                                         "usb start;" \
225                                         "if usb storage; then " \
226                                                 "if run usb_load_rescuefit " \
227                                                         "hab_check_file_fit;"\
228                                                         "then " \
229                                                         "run rescueboot;" \
230                                                 "fi; " \
231                                                 "if run usb_load_rescuefitf "\
232                                                         "hab_check_file_fit;"\
233                                                         "then " \
234                                                         "run rescueboot;" \
235                                                 "fi; " \
236                                         "fi;" \
237                                 "fi;" \
238                                 "run dead; " \
239                                 "echo RESCUE SYSTEM ON SD OR " \
240                                         "USB BOOT FAILURE;" \
241                         "else " \
242                                 "usb start;" \
243                                 "if usb storage; then " \
244                                         "if run usb_load_rescuefit " \
245                                                 "hab_check_file_fit; then " \
246                                                 "run rescueboot;" \
247                                         "fi; " \
248                                         "if run usb_load_rescuefitf " \
249                                                 "hab_check_file_fit; then " \
250                                                 "run rescueboot;" \
251                                         "fi; " \
252                                 "fi;" \
253                                 "run dead; " \
254                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
255                         "fi; " \
256                 "else "\
257                         "if run rescue_load_fit hab_check_file_fit; then " \
258                                 "run rescueboot; " \
259                         "else " \
260                                 "run dead; " \
261                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
262                         "fi; " \
263                 "fi;\0" \
264         "ari_boot=if test ${bootmode} -ne 0 ; then " \
265                 "mmc dev ${mmcdev};" \
266                 "if mmc rescan; then " \
267                         "if run loadbootscript hab_check_file_bootscript;" \
268                                 "then run bootscript; " \
269                         "fi; " \
270                         "if run mmc_load_fit hab_check_file_fit; then " \
271                                 "if run mmcboot; then ; " \
272                                 "else " \
273                                         "run mmc_rescue_boot;" \
274                                 "fi; " \
275                         "else " \
276                                 "run usb_mmc_rescue_boot;" \
277                         "fi; " \
278                 "else " \
279                         "run usb_mmc_rescue_boot;" \
280                 "fi; " \
281         "else "\
282                 "run main_rescue_boot;" \
283         "fi; \0"\
284         CONFIG_EXTRA_ENV_BOARD_SETTINGS
285
286 #define CONFIG_ARP_TIMEOUT              200UL
287
288 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
289 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
290 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
291
292 /* Physical Memory Map */
293 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
294
295 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
296 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
297 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
298
299 #define CONFIG_SYS_INIT_SP_OFFSET \
300         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
301 #define CONFIG_SYS_INIT_SP_ADDR \
302         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
303
304 #define CONFIG_SYS_FSL_USDHC_NUM        2
305
306 /* NAND stuff */
307 #define CONFIG_SYS_MAX_NAND_DEVICE      1
308 #define CONFIG_SYS_NAND_BASE            0x40000000
309 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
310 #define CONFIG_SYS_NAND_ONFI_DETECTION
311
312 /* DMA stuff, needed for GPMI/MXS NAND support */
313
314 /* USB Configs */
315 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
316 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
317 #define CONFIG_MXC_USB_FLAGS    0
318
319 /* UBI support */
320
321 /* Framebuffer */
322 /* check this console not needed, after test remove it */
323 #define CONFIG_SPLASH_SCREEN
324 #define CONFIG_SPLASH_SCREEN_ALIGN
325 #define CONFIG_IMX_VIDEO_SKIP
326 #define CONFIG_VIDEO_LOGO
327 #define CONFIG_VIDEO_BMP_LOGO
328 #define CONFIG_BMP_16BPP
329 #define CONFIG_VIDEO_BMP_RLE8
330
331 #define CONFIG_IMX6_PWM_PER_CLK 66000000
332
333 #endif                         /* __ARISTAINETOS2_CONFIG_H */