include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #define CONFIG_MXC_UART_BASE    UART2_BASE
  17 #define CONSOLE_DEV     "ttymxc1"
  18
  19 #define CONFIG_FEC_XCV_TYPE             RGMII
  20
  21 /* Framebuffer */
  22 #define CONFIG_SYS_LDB_CLOCK    28341000
  23 #define CONFIG_LG4573
  24
  25 #include "mx6_common.h"
  26
  27 #define CONFIG_MACH_TYPE        4501
  28 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  29
  30 /* MMC Configs */
  31 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  32
  33 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          0
  36
  37 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  38
  39 #ifdef CONFIG_IMX_HAB
  40 #define HAB_EXTRA_SETTINGS \
  41         "hab_check_addr=" \
  42                 "if hab_auth_img ${check_addr} ${filesize} ; then " \
  43                         "true;" \
  44                 "else " \
  45                         "echo \"HAB checks ${hab_check_filetype} " \
  46                         "failed!\"; " \
  47                         "false; " \
  48                 "fi;\0" \
  49         "hab_check_file_fit=" \
  50                 "if env exists enable_hab_check && test " \
  51                         "${enable_hab_check} -eq 1 ; then " \
  52                         "setenv hab_check_filetype \"FIT file on SD card " \
  53                         "or eMMC\";" \
  54                         "env set check_addr ${fit_addr_r};" \
  55                         "run hab_check_addr;" \
  56                 "else " \
  57                         "true; "\
  58                 "fi;\0" \
  59         "hab_check_file_bootscript=" \
  60                 "if env exists enable_hab_check && test " \
  61                         "${enable_hab_check} -eq 1 ; then " \
  62                         "setenv hab_check_filetype \"Bootscript file\";" \
  63                         "env set check_addr ${loadaddr};" \
  64                         "run hab_check_addr;" \
  65                 "else " \
  66                         "true; "\
  67                 "fi;\0" \
  68         "hab_check_flash_fit=" \
  69                 "if env exists enable_hab_check && test " \
  70                         "${enable_hab_check} -eq 1 ; then " \
  71                         "setenv hab_check_filetype \"FIT files on flash\";" \
  72                         "env set check_addr ${fit_addr_r};" \
  73                         "run hab_check_addr;" \
  74                 "else " \
  75                         "true; "\
  76                 "fi;\0" \
  77         "enable_hab_check=1\0"
  78 #else
  79 #define HAB_EXTRA_SETTINGS \
  80         "hab_check_file_fit=echo HAB check FIT file always returns " \
  81                 "true;true\0" \
  82         "hab_check_flash_fit=echo HAB check flash FIT always returns " \
  83                 "true;true\0" \
  84         "hab_check_file_bootscript=echo HAB check bootscript always " \
  85                 "returns true;true\0" \
  86         "enable_hab_check=0\0"
  87 #endif
  88
  89 #if (CONFIG_SYS_BOARD_VERSION == 3)
  90 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
  91         "dead=led led_red on\0" \
  92         "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
  93         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
  94                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
  95         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
  96                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
  97         "mainboot=echo Booting from SD-card ...; " \
  98                 "run mainargs addmtd addmisc;" \
  99                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 100                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 101                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 102                 "run boot_board_type;" \
 103                 "bootm ${fit_addr_r}\0" \
 104         "mainargs=setenv bootargs console=${console},${baudrate} " \
 105                 "root=${mmcroot}\0" \
 106         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 107                 "${fit_file}\0" \
 108         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 109                 "${fit_addr_r} ${rescue_fit_file}\0"
 110 #elif (CONFIG_SYS_BOARD_VERSION == 4)
 111 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
 112         "dead=led led_red on;led led_red2 on;\0" \
 113         "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
 114         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
 115                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
 116         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 117                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
 118         "mainboot=echo Booting from SD-card ...; " \
 119                 "run mainargs addmtd addmisc;" \
 120                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 121                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 122                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 123                 "run boot_board_type;" \
 124                 "bootm ${fit_addr_r}\0" \
 125         "mainargs=setenv bootargs console=${console},${baudrate} " \
 126                 "root=${mmcroot}\0" \
 127         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 128                 "${fit_file}\0" \
 129         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 130                 "${fit_addr_r} ${rescue_fit_file}\0"
 131 #elif (CONFIG_SYS_BOARD_VERSION == 5)
 132 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
 133         "emmcpart=1\0" \
 134         "emmc_rescue_part=3\0" \
 135         "emmcdev=1\0" \
 136         "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
 137         "dead=led led_red on\0" \
 138         "mtdids=nor0=spi0.0\0" \
 139         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
 140                 "-(ubi-nor)\0" \
 141         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 142                 "bootmode=${bootmode} mmcpart=${mmcpart} " \
 143                 "emmcpart=${emmcpart}\0" \
 144         "mainboot=echo Booting from eMMC ...; " \
 145                 "run mainargs addmtd addmisc;" \
 146                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 147                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 148                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 149                 "run boot_board_type;" \
 150                 "bootm ${fit_addr_r}\0" \
 151         "mainargs=setenv bootargs console=${console},${baudrate} " \
 152                 "root=${emmcroot} rootfstype=ext4\0 " \
 153         "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 154                 "${fit_file}; " \
 155                 "imi ${fit_addr_r}\0 " \
 156         "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \
 157                 "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0"
 158 #else
 159 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
 160         "dead=led led_red on\0" \
 161         "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
 162         "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
 163                 "-(ubi-nor);gpmi-nand:-(ubi)\0" \
 164         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 165                 "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
 166         "mainboot=echo Booting from SD-card ...; " \
 167                 "run mainargs addmtd addmisc;" \
 168                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 169                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 170                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 171                 "run boot_board_type;" \
 172                 "bootm ${fit_addr_r}\0" \
 173         "mainargs=setenv bootargs console=${console},${baudrate} " \
 174                 "root=${mmcroot}\0" \
 175         "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 176                 "${fit_file}\0" \
 177         "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 178                 "${fit_addr_r} ${rescue_fit_file}\0"
 179 #endif
 180
 181 #define CONFIG_EXTRA_ENV_SETTINGS \
 182         "disable_giga=yes\0" \
 183         "usb_pgood_delay=2000\0" \
 184         "nor_bootdelay=-2\0" \
 185         "script=u-boot.scr\0" \
 186         "fit_file=/boot/system.itb\0" \
 187         "rescue_fit_file=/boot/rescue.itb\0" \
 188         "loadaddr=0x12000000\0" \
 189         "fit_addr_r=0x14000000\0" \
 190         "uboot=/boot/u-boot.imx\0" \
 191         "uboot_sz=d0000\0" \
 192         "panel=lb07wv8\0" \
 193         "splashpos=m,m\0" \
 194         "console=" CONSOLE_DEV "\0" \
 195         "fdt_high=0xffffffff\0"   \
 196         "initrd_high=0xffffffff\0" \
 197         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 198         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
 199         "get_env=mw ${loadaddr} 0 0x20000;" \
 200                 "mmc rescan;" \
 201                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 202                 "env import -t ${loadaddr}\0" \
 203         "default_env=gpio set wp_spi_nor.gpio-hog;" \
 204                 "sf probe;" \
 205                 "sf protect unlock 0 0x1000000;" \
 206                 "mw ${loadaddr} 0 0x20000;" \
 207                 "env export -t ${loadaddr} serial# ethaddr " \
 208                 "board_type panel addmisc addmiscM addmiscC addmiscD;" \
 209                 "env default -a;" \
 210                 "env import -t ${loadaddr}\0" \
 211         "loadbootscript=" \
 212                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 213                 "${script};\0" \
 214         "loadbootscriptUSB=" \
 215                 "ext4load usb 0 ${loadaddr} ${script};\0" \
 216         "loadbootscriptUSBf=" \
 217                 "fatload usb 0 ${loadaddr} ${script};\0" \
 218         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
 219                 "source\0" \
 220         "bootscript=echo Running bootscript from mmc ...; " \
 221                 "source\0" \
 222         "mmcpart=1\0" \
 223         "mmcrescuepart=3\0" \
 224         "mmcdev=0\0" \
 225         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 226         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 227                 "root=${mmcroot}\0" \
 228         "mmcboot=echo Booting from mmc ...; " \
 229                 "run mmcargs addmtd addmisc;" \
 230                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 231                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 232                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 233                 "run boot_board_type;" \
 234                 "bootm ${fit_addr_r}\0" \
 235         "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 236                 "${fit_file}\0" \
 237         "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 238                 "${uboot}\0" \
 239         "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
 240                 "${fit_addr_r} ${rescue_fit_file}\0" \
 241         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 242                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 243                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 244                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 245                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 246                 "sf write ${loadaddr} 400 ${filesize};" \
 247                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 248                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 249         "rescueargs=setenv bootargs console=${console},${baudrate} " \
 250                 "root=/dev/ram rw\0 " \
 251         "rescueboot=echo Booting rescue system ...; " \
 252                 "run rescueargs addmtd addmisc;" \
 253                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
 254                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 255                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 256                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 257                 "run boot_board_type;" \
 258                 "if bootm ${fit_addr_r}; then ; " \
 259                 "else " \
 260                         "run dead; " \
 261                 "fi; \0" \
 262         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
 263                 "\\\\${bootargs} " \
 264         "rescueReason=18\0 " \
 265         "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
 266         "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
 267         "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
 268                 "${rescue_fit_file}\0" \
 269         "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
 270                 "${rescue_fit_file}\0" \
 271         "usbroot=/dev/sda1 rootwait rw\0" \
 272         "usbboot=echo Booting from usb-stick ...; " \
 273                 "run usbargs addmtd addmisc;" \
 274                 "if test -n ${addmiscM}; then run addmiscM;fi;" \
 275                 "if test -n ${addmiscC}; then run addmiscC;fi;" \
 276                 "if test -n ${addmiscD}; then run addmiscD;fi;" \
 277                 "run boot_board_type;" \
 278                 "bootm ${fit_addr_r}\0" \
 279         "usbargs=setenv bootargs console=${console},${baudrate} " \
 280                 "root=${usbroot}\0" \
 281         "mmc_rescue_boot=" \
 282                 "run r_reason_syserr;" \
 283                 "if run mmc_rescue_load_fit hab_check_file_fit; then " \
 284                         "run rescueboot; " \
 285                 "else " \
 286                         "run dead; " \
 287                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
 288                 "fi;\0" \
 289         "main_rescue_boot=" \
 290                 "if run main_load_fit hab_check_flash_fit; then " \
 291                         "if run mainboot; then ; " \
 292                         "else " \
 293                                 "run r_reason_syserr;" \
 294                                 "if run rescue_load_fit hab_check_file_fit;" \
 295                                         "then run rescueboot; " \
 296                                 "else " \
 297                                         "run dead; " \
 298                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
 299                                 "fi; " \
 300                         "fi; " \
 301                 "else " \
 302                         "run r_reason_syserr;" \
 303                         "if run rescue_load_fit hab_check_file_fit; then " \
 304                                 "run rescueboot; " \
 305                         "else " \
 306                                 "run dead; " \
 307                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 308                         "fi; " \
 309                 "fi;\0" \
 310         "usb_mmc_rescue_boot=" \
 311                 "usb start;" \
 312                 "if usb storage; then " \
 313                         "if run loadbootscriptUSB " \
 314                                 "hab_check_file_bootscript;" \
 315                                 "then run bootscriptUSB; " \
 316                         "fi; " \
 317                         "if run loadbootscriptUSBf " \
 318                                 "hab_check_file_bootscript;" \
 319                                 "then run bootscriptUSB; " \
 320                         "fi; " \
 321                         "if run usb_load_fit hab_check_file_fit; then " \
 322                                 "run usbboot; " \
 323                         "fi; " \
 324                         "if run usb_load_fitf hab_check_file_fit; then " \
 325                                 "run usbboot; " \
 326                         "fi; "\
 327                         "if run usb_load_rescuefit hab_check_file_fit;" \
 328                                 "then run r_reason_syserr rescueboot;" \
 329                         "fi; " \
 330                         "if run usb_load_rescuefitf hab_check_file_fit;" \
 331                                 "then run r_reason_syserr rescueboot;" \
 332                         "fi; " \
 333                         "run mmc_rescue_boot;" \
 334                 "fi; "\
 335                 "run mmc_rescue_boot;\0" \
 336         "rescue_xload_boot=" \
 337                 "run r_reason_syserr;" \
 338                 "if test ${bootmode} -ne 0 ; then " \
 339                         "mmc dev ${mmcdev};" \
 340                         "if mmc rescan; then " \
 341                                 "if run mmc_rescue_load_fit " \
 342                                         "hab_check_file_fit; then " \
 343                                         "run rescueboot; " \
 344                                 "else " \
 345                                         "usb start;" \
 346                                         "if usb storage; then " \
 347                                                 "if run usb_load_rescuefit " \
 348                                                         "hab_check_file_fit;"\
 349                                                         "then " \
 350                                                         "run rescueboot;" \
 351                                                 "fi; " \
 352                                                 "if run usb_load_rescuefitf "\
 353                                                         "hab_check_file_fit;"\
 354                                                         "then " \
 355                                                         "run rescueboot;" \
 356                                                 "fi; " \
 357                                         "fi;" \
 358                                 "fi;" \
 359                                 "run dead; " \
 360                                 "echo RESCUE SYSTEM ON SD OR " \
 361                                         "USB BOOT FAILURE;" \
 362                         "else " \
 363                                 "usb start;" \
 364                                 "if usb storage; then " \
 365                                         "if run usb_load_rescuefit " \
 366                                                 "hab_check_file_fit; then " \
 367                                                 "run rescueboot;" \
 368                                         "fi; " \
 369                                         "if run usb_load_rescuefitf " \
 370                                                 "hab_check_file_fit; then " \
 371                                                 "run rescueboot;" \
 372                                         "fi; " \
 373                                 "fi;" \
 374                                 "run dead; " \
 375                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
 376                         "fi; " \
 377                 "else "\
 378                         "if run rescue_load_fit hab_check_file_fit; then " \
 379                                 "run rescueboot; " \
 380                         "else " \
 381                                 "run dead; " \
 382                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
 383                         "fi; " \
 384                 "fi;\0" \
 385         "ari_boot=if test ${bootmode} -ne 0 ; then " \
 386                 "mmc dev ${mmcdev};" \
 387                 "if mmc rescan; then " \
 388                         "if run loadbootscript hab_check_file_bootscript;" \
 389                                 "then run bootscript; " \
 390                         "fi; " \
 391                         "if run mmc_load_fit hab_check_file_fit; then " \
 392                                 "if run mmcboot; then ; " \
 393                                 "else " \
 394                                         "run mmc_rescue_boot;" \
 395                                 "fi; " \
 396                         "else " \
 397                                 "run usb_mmc_rescue_boot;" \
 398                         "fi; " \
 399                 "else " \
 400                         "run usb_mmc_rescue_boot;" \
 401                 "fi; " \
 402         "else "\
 403                 "run main_rescue_boot;" \
 404         "fi; \0"\
 405         HAB_EXTRA_SETTINGS \
 406         CONFIG_EXTRA_ENV_BOARD_SETTINGS
 407
 408 #define CONFIG_ARP_TIMEOUT              200UL
 409
 410 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 411 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
 412 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 413
 414 /* Physical Memory Map */
 415 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 416
 417 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 418 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 419 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 420
 421 #define CONFIG_SYS_INIT_SP_OFFSET \
 422         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 423 #define CONFIG_SYS_INIT_SP_ADDR \
 424         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 425
 426 #define CONFIG_SYS_FSL_USDHC_NUM        2
 427
 428 /* NAND stuff */
 429 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 430 #define CONFIG_SYS_NAND_BASE            0x40000000
 431 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 432 #define CONFIG_SYS_NAND_ONFI_DETECTION
 433
 434 /* DMA stuff, needed for GPMI/MXS NAND support */
 435
 436 /* USB Configs */
 437 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 438 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 439 #define CONFIG_MXC_USB_FLAGS    0
 440
 441 /* UBI support */
 442
 443 /* Framebuffer */
 444 /* check this console not needed, after test remove it */
 445 #define CONFIG_SPLASH_SCREEN
 446 #define CONFIG_SPLASH_SCREEN_ALIGN
 447 #define CONFIG_IMX_VIDEO_SKIP
 448 #define CONFIG_VIDEO_LOGO
 449 #define CONFIG_VIDEO_BMP_LOGO
 450 #define CONFIG_BMP_16BPP
 451 #define CONFIG_VIDEO_BMP_RLE8
 452
 453 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 454
 455 #endif                         /* __ARISTAINETOS2_CONFIG_H */