include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #define CONFIG_MXC_UART_BASE    UART2_BASE
  17 #define CONSOLE_DEV     "ttymxc1"
  18
  19 #define CONFIG_FEC_XCV_TYPE             RGMII
  20
  21 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
  22         "board_type=aristainetos2_7@1\0" \
  23         "nor_bootdelay=-2\0" \
  24         "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
  25         "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
  26                 "-(rescue-system);gpmi-nand:-(ubi)\0" \
  27         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \
  28         "ubiargs=setenv bootargs console=${console},${baudrate} " \
  29                 "ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \
  30         "ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \
  31                 "ubifsload ${fit_addr_r} /boot/system.itb; " \
  32                 "imi ${fit_addr_r}\0 "
  33
  34 #define CONFIG_GPIO_ENABLE_SPI_FLASH    IMX_GPIO_NR(2, 15)
  35
  36 /* Framebuffer */
  37 #define CONFIG_SYS_LDB_CLOCK 33246000
  38 #define CONFIG_LG4573
  39
  40 #include "mx6_common.h"
  41
  42 #define CONFIG_MACH_TYPE        4501
  43 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  44
  45 /* MMC Configs */
  46 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  47
  48 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  49 #define CONFIG_ETHPRIME                 "FEC"
  50 #define CONFIG_FEC_MXC_PHYADDR          0
  51
  52 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  53
  54 #define CONFIG_EXTRA_ENV_SETTINGS \
  55         "disable_giga=yes\0" \
  56         "script=u-boot.scr\0" \
  57         "fit_file=/boot/system.itb\0" \
  58         "loadaddr=0x12000000\0" \
  59         "fit_addr_r=0x14000000\0" \
  60         "uboot=/boot/u-boot.imx\0" \
  61         "uboot_sz=d0000\0" \
  62         "rescue_sys_addr=f0000\0" \
  63         "rescue_sys_length=f10000\0" \
  64         "panel=lb07wv8\0" \
  65         "splashpos=m,m\0" \
  66         "console=" CONSOLE_DEV "\0" \
  67         "fdt_high=0xffffffff\0"   \
  68         "initrd_high=0xffffffff\0" \
  69         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
  70         "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
  71                 "default ${board_type}\0" \
  72         "get_env=mw ${loadaddr} 0 0x20000;" \
  73                 "mmc rescan;" \
  74                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
  75                 "env import -t ${loadaddr}\0" \
  76         "default_env=mw ${loadaddr} 0 0x20000;" \
  77                 "env export -t ${loadaddr} serial# ethaddr eth1addr " \
  78                 "board_type panel;" \
  79                 "env default -a;" \
  80                 "env import -t ${loadaddr}\0" \
  81         "loadbootscript=" \
  82                 "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  83         "bootscript=echo Running bootscript from mmc ...; " \
  84                 "source\0" \
  85         "mmcpart=1\0" \
  86         "mmcdev=0\0" \
  87         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  88         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  89                 "root=${mmcroot}\0" \
  90         "mmcboot=echo Booting from mmc ...; " \
  91                 "run mmcargs addmtd addmisc set_fit_default;" \
  92                 "bootm ${fit_addr_r}\0" \
  93         "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
  94                 "${fit_file}\0" \
  95         "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
  96                 "${uboot}\0" \
  97         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
  98                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
  99                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 100                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 101                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 102                 "sf write ${loadaddr} 400 ${filesize};" \
 103                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 104                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 105         "ubiboot=echo Booting from ubi ...; " \
 106                 "run ubiargs addmtd addmisc set_fit_default;" \
 107                 "bootm ${fit_addr_r}\0" \
 108         "rescueargs=setenv bootargs console=${console},${baudrate} " \
 109                 "root=/dev/ram rw\0 " \
 110         "rescueboot=echo Booting rescue system from NOR ...; " \
 111                 "run rescueargs addmtd addmisc set_fit_default;" \
 112                 "bootm ${fit_addr_r}\0" \
 113         "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
 114                 "${rescue_sys_length}; imi ${fit_addr_r}\0" \
 115         CONFIG_EXTRA_ENV_BOARD_SETTINGS
 116
 117 #define CONFIG_BOOTCOMMAND \
 118         "mmc dev ${mmcdev};" \
 119         "if mmc rescan; then " \
 120                 "if run loadbootscript; then " \
 121                         "run bootscript; " \
 122                 "else " \
 123                         "if run mmc_load_fit; then " \
 124                                 "run mmcboot; " \
 125                         "else " \
 126                                 "if run ubifs_load_fit; then " \
 127                                         "run ubiboot; " \
 128                                 "else " \
 129                                         "if run rescue_load_fit; then " \
 130                                                 "run rescueboot; " \
 131                                         "else " \
 132                                                 "echo RESCUE SYSTEM BOOT " \
 133                                                         "FAILURE;" \
 134                                         "fi; " \
 135                                 "fi; " \
 136                         "fi; " \
 137                 "fi; " \
 138         "else " \
 139                 "if run ubifs_load_fit; then " \
 140                         "run ubiboot; " \
 141                 "else " \
 142                         "if run rescue_load_fit; then " \
 143                                 "run rescueboot; " \
 144                         "else " \
 145                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 146                         "fi; " \
 147                 "fi; " \
 148         "fi"
 149
 150 #define CONFIG_ARP_TIMEOUT              200UL
 151
 152 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM
 153 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x100000)
 154 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 155
 156 /* Physical Memory Map */
 157 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 158
 159 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 160 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 161 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 162
 163 #define CONFIG_SYS_INIT_SP_OFFSET \
 164         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 165 #define CONFIG_SYS_INIT_SP_ADDR \
 166         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 167
 168 #define CONFIG_SYS_FSL_USDHC_NUM        2
 169
 170 /* I2C */
 171 #define CONFIG_SYS_I2C
 172 #define CONFIG_SYS_I2C_SPEED            100000
 173 #define CONFIG_SYS_I2C_SLAVE            0x7f
 174 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x00} }
 175
 176 /* NAND stuff */
 177 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 178 #define CONFIG_SYS_NAND_BASE            0x40000000
 179 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 180 #define CONFIG_SYS_NAND_ONFI_DETECTION
 181
 182 /* DMA stuff, needed for GPMI/MXS NAND support */
 183
 184 /* RTC */
 185 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 186 #define CONFIG_SYS_RTC_BUS_NUM  2
 187 #define CONFIG_RTC_M41T11
 188
 189 /* USB Configs */
 190 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 191 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 192 #define CONFIG_MXC_USB_FLAGS    0
 193
 194 /* UBI support */
 195
 196 /* Framebuffer */
 197 /* check this console not needed, after test remove it */
 198 #define CONFIG_VIDEO_BMP_RLE8
 199 #define CONFIG_SPLASH_SCREEN
 200 #define CONFIG_SPLASH_SCREEN_ALIGN
 201 #define CONFIG_BMP_16BPP
 202 #define CONFIG_VIDEO_LOGO
 203 #define CONFIG_VIDEO_BMP_LOGO
 204 #define CONFIG_IMX_VIDEO_SKIP
 205
 206 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 207
 208
 209 #endif                         /* __ARISTAINETOS2_CONFIG_H */